Hi ,
I'm new to Linux , I installed Kali linux on my pc and the wifi card isn't working ..
It is a usb wifi card , It has a cd for its driver. There is a folder in the cd called " Linux Driver " and here's what is inside it
First folder :
http://imgur.com/WTNgnEm
Second folder :
http://imgur.com/PyH07Cs
And here it is when I write lsusb :
http://i.imgur.com/NiPbbxSh.jpg
I'd like to know the steps to install it , Thanks in advance ..
Hello,
I'm trying to install Linux computer brand Positive
MS-7267 see 4.5 (945GCM5 v2)
Intel Celeron 420 1.6 GHz
2GB DDR2 memory
80GB HD
I believe he was previously with Windows 7 installed (but the original factory is Vista Starter)
I used the KillDisk for formatting, and overwrite zeros, and apparently it was all OK.
When trying to install Elementary OS (DVD) or Ubuntu (another DVD), appears the keyboard and the doll:
http://imgur.com/0OqZYBv
but later it goes to black screen with a list of errors.
List errors when trying to install Elementary OS:
http://imgur.com/OV8ji6m
List errors when trying to install Ubuntu:
http://imgur.com/4dnmE2O
Too tried the Mageia (DVD)
The following installation screen appears: http://imgur.com/KaAyBeW
I tried to add some parameters both in Mageia as The Elemetary and ubuntu (after pressing F6), as
acpi = off noapic nolapic nodma PNPBIOS nomodeset irqpoll xdriver = vesa resolution = 1024x768 and nothing, changed nothing
In Mageia, when I click install linux kernel appears the load popup and always goes to 100%, but then just goes black screen passes 10, 20 minutes and not change anything
Selecting Mageia hardware detection option appears the information below:
http://imgur.com/4GwHUeE
http://imgur.com/8ZcbS1C
http://imgur.com/mLQrclq
http://imgur.com/qmRZ09J
http://imgur.com/OCCdx6b
http://imgur.com/IYQM4BC
http://imgur.com/gpFF7I0
In the bios setup already disable IOAPIC, checked if the vga is 8mb and TBM does not change anything:
screens is set as:
http://imgur.com/UzLPOT0
http://imgur.com/KY7ksGh
http://imgur.com/SDzWKje
I'm three days trying to install Linux and I can not.
I thank those who can help
Hello, I'm having a problem on Kali Linux. I've added some shotcuts to the top panel but it shifts to the left from time to time until I cannot see anything I cant even click on Applications menu because it clicks the shortcut behind it.
Example:
http://i.imgur.com/gV4s3FY.png
http://i.imgur.com/ZelH4Kh.png
http://i.imgur.com/kVJ5ruR.png
It fixes when I log out and log in again. I'm looking for a permanent solution, any help?
Thanks.
Hi
I am new to kali linux and have got a fresh install with all the current updates (without any new repositories). I am really interested in aircrack and wifi exploitation. But before i can do any of that i need to install my second network adapter, the asus n53 pcie. I am able to type this because my motherboard came with its own intergrated wifi adapter, the aetheros (something). That was working out of the box as soon as kali linux was installed, however i need a proper network adapter (the n53) to make use of my 3rd party long range antenna (it can pick up networks over 600m away ).
I am attempting to install my asus n53 pcie network adapter but have had no success at all, most likely because i have no idea what to do once i have extracted the driver. Currently it is sitting in my home folder. It has a few folders and files in it, with these being the folders
(chips, common, include, os, rate_ctrl, sta and tools)
and these being the files
(iwpriv_usage.txt, makefile, readme_sta_pci, rt2860STA.dat, rt2860staCarddat, sta_ate_iwpriv_usage.txt.)
In the readme file it says this in the instructions:
1> $tar -xvzf DPB_RT2860_Linux_STA_x.x.x.x.tgz
go to "./DPB_RT2860_Linux_STA_x.x.x.x" directory.
2> In Makefile
set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
define the linux kernel source include file path LINUX_SRC
modify to meet your need.
3> In os/linux/config.mk
define the GCC and LD of the target machine
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
=> #>cd wpa_supplicant-x.x
=> #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
=> #>cd wpa_supplicant-0.5.7
=> #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d
4> $make
# compile driver source code
# To fix "error: too few arguments to function ”„iwe_stream_add_event"
=> $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c
5> $cp RT2860STA.dat /etc/Wireless/RT2860STA/RT2860STA.dat
6> load driver
#[kernel 2.4]
# $/sbin/insmod rt2860sta.o
# $/sbin/ifconfig ra0 inet YOUR_IP up
#[kernel 2.6]
# $/sbin/insmod rt2860sta.ko
# $/sbin/ifconfig ra0 inet YOUR_IP up
7> unload driver
$/sbin/ifconfig ra0 down
$/sbin/rmmod rt2860sta
And this to me looks like another language. I would GREATLY APPRECIATE IT if someone could give me step by step instructions on how to install this, without skipping on anything. I will even pay 10000 dogecoin if someone helps me! I have been searching youtube tutorials for 3 hours (lol) for it and havent found anything. Please help me!
Thanks
I have a WiFi dongle that said to support GNU/Linux, however no drivers were found on the CD, after hours of research i found this and installed the driver, I'm pretty sure my device is listed as supported, but the device is still not recognized, it is listed on lsusb command, but not recognized by any WiFi program like WiFi Radar and wireless-tools, also when i use the iwconfig command, this is what i see, i really need this wireless connection working, can you help, please?
When I installed mint today from cd, I had to use the save-mode because of the nvidia card. So I was aware I had to change driver after install.
Right after install I checked these '10 thing to first do after install'.
http://itsfoss.com/things-to-do-afte...mint-16-petra/
I did these
Improve battery life
Change screensaver timing
Install RAR
Then I checked the driver manager to deal with the graphic driver. I tried all 3 in the driver manager, but with each mint crashes with this message right after login.
Quote:
cinnamon just crashed you are currently running in Fallback Mode
It asks if I want to restart, click 'yes' and it just refreshes the screen with the same message. click 'no' the message goes away but cinnamon does not work.
So I don't know if its crashing because of the driver or because of those things I changed after the install.
I googled some and this issue is all over linux forums, but I can't find a solution anywhere.
Hi
My wifi isn't working. Broadcom 14e4:43a0 is what I got. Running off a USB on Macbook. Cant apt-get update or install anything as there is no wifi. There is no ethernet port either. I might need the drivers i think ? Maybe its a quick fix ! Please help !!
Thanks in advance.
Hi everyone, I am a new member and also new to linux, I encountered a problem, but last week I tried but did not solve
I downloaded iso file linux 1.1.0 on page potassium https://www.kali.org, I installed on my Dell inspiron n4010, it works very well and does not have any errors, but after I update and upgrade all packages, I rebooted the system switches to the command line, I lost a lot of time to return to the graphics, but when booting up the network manager icon not seen, I have set the package network-manager-gnome_0.9.4.1-0ubuntu2_i386.deb network manager icon show but when click on the network manager icon only contained text "network manager is not running."
I also installed Wicd but could not run "could not connect to wicd's D-Bus interface. Check the wicd log for error messages."
wireless driver apparently was set before
root@kali:~# airmon-ng
PHY Interface Driver Chipset
phy0 wlan0 wl Broadcom Corporation BCM4313 802.11b/g/n (rev 01)
please help me!
please guide installed offline, my kali linux no internet connection. can download package from another machine to install.
Hello everyone from stackexchange,
I am a total Linux newbie, and for a short school task I have to perform the following action in Linux OpenWRT running in my virtualbox. I have tried multiple commands and googled a lot but I can't get it working. If someone could help me out on what to do, that would be awesome. I have looked through the manuals too but it doesnt seem to work.
Task: http://i.imgur.com/MeLcGJh.png
My OpenWRT screen: http://imgur.com/98OLB9Y
Many thanks.
Hi I've been trying to get my atheros wireless card (Mini pcie) to work but with no luck. I'm currently using Kali linux. Do I need to install a driver or is there any other way for the chipset to work?
Any help is appreciated.
Thanks
I installed Linux Mint on my Dell Latitude D630 Wi Fi and I love it!! While the lap top was wired to the internet, I could do anything I wanted to do.
But I have wifi. And, the steps I found online did not help me get wifi set up.
When I type "iwconfig" from the command line, it says "no wireless extensions"
Please help. I need this.