Command Manual Working But Not On Cron

I need to clean-up some folder. I have a cron job which uses find command to find and delete 25 days older file.

Code:

find $FOLDER_PATH/$FOLDER -depth -regex  ^$FOLDER_PATH/$FOLDER/[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$ -type d -mtime +25  -exec ls -ld {} \;   >> /tmp/deleted_folders.log

When this running it occupies 1-3% of cpu. And it may take longer time based on the folder size.

Is it ok to have find command running as cron job ?

am trying to use tar in combination with find, the goal is to all files in /export that have been modified in the last 24 hours (back up purposes), then tar them so I can untar on the backup server, updating just the modified files.

Perhaps there is a better way, however, I have tried using cpio but the problem come in when I copy to the NAS drive (NTFS) I lose all my owner/group and permissions. I have found that if I tar the files, then copy them to the NAS, when I untar on the server, it will retain the owner/group and permissions.

So… here is what I have tried:

First, I use the find command to see what files should be in the tar archive.
Code:

/export $ find . -depth -mtime 0 -print
./file4
./file3
.

Ok, that looks right, now I will try to pipe that in to tar
Code:

/export $ find . -depth -mtime 0 -print0 | tar -czvf backup.tar.gz --null -T - 
./file4
./file3
./
./share/
./share/pdf/
./share/pdf/penny-2014-09-03-11:41.30.pdf
./share/pdf/penny-2014-09-03-14:25.17.pdf
./share/pdf/penny-2014-09-03-11:24.36.pdf
./share/pdf/penny-2014-09-03-14:37.12.pdf
tar: ./share/pdf/.directory: Cannot open: Permission denied
./share/pdf/penny-2014-09-02-14:52.06.pdf
./share/pdf/penny-2014-09-03-12:18.43.pdf
tar: ./share/PDF: Cannot open: Permission denied
./share/file3
tar: ./share/.directory: Cannot open: Permission denied
./dir1/
./dir1/file1
./file4
./file2
./file3
tar: ./.directory: Cannot open: Permission denied
./list
tar: Exiting with failure status due to previous errors

It seems that it is trying to tar all the files in that directory. When I view the files in backup.tar.gz all of the files from /export are in there not just the modified ones

I have a shell script to find folders which are 25 days older and delete it, and put the deleted folder details into log file like this

Code:

 find /ahome/xxx/$FOLDER -type d -mtime +25  -exec ls -ld {} \;  -exec rm -rf {} \;  >> mylogfile.log

after running this command it deletes the folder and logs the folder deleted. But also print error msg
Code:

find: /ahome/prksh/dir/test: No such file or directory

How to suppress the error msg

I'm running LinuxLite 2.0 32bit on a Dell 3000.

I have never come across anything like this and to tell you, I am stumped.

Here are the contents of my crontab file:

Code:

# Edit this file to introduce tasks to be run by cron.
#
# Each task to run has to be defined through a single line
# indicating with different fields when the task will be run
# and what command to run for the task
#
# To define the time you can provide concrete values for
# minute (m), hour (h), day of month (dom), month (mon),
# and day of week (dow) or use '*' in these fields (for 'any').#
# Notice that tasks will be started based on the cron's system
# daemon's notion of time and timezones.
#
# Output of the crontab jobs (including errors) is sent through
# email to the user the crontab file belongs to (unless redirected).
#
# For example, you can run a backup of all your user accounts
# at 5 a.m every week with:
# 0 5 * * 1 tar -zcf /var/backups/home.tgz /home/
#
# For more information see the manual pages of crontab(5) and cron(8)
#
# m h  dom mon dow   command
*/10 * * * * /usr/bin/arecord -t wav -f cd -d 42 /home/randy/Music/lanting$(date "+\%^b\%d\%y").wav

If I run this from the terminal, everything is fine. It properly records the audio:

Code:

/usr/bin/arecord -t wav -f cd -d 42 /home/randy/Music/lanting$(date "+\%^b\%d\%y").wav

If I run this as it is shown in my crontab file, it records but there is no audio recorded.:


Code:

*/10 * * * * /usr/bin/arecord -t wav -f cd -d 42 /home/randy/Music/lanting$(date "+\%^b\%d\%y").wav

What could be causing this? I tried different cron settings for example 15 14 * * 2

This recorded at 2:15pm on Tuesday (today) but no audio. Yet if I run the code as mentioned above, from the terminal without the cron settings, the recording is fine.

Any ideas what I should do?

Hi,

i have a small problem on my system... I recently wrote a small bash script and added it via crontab -u root -e and it's executed as it should.
Then a few days after i did edit my bash script, but once it is run by cron it doesn't reflect the changes i made to the script. I did manually restart crond, tryed sync, moved my script, renamed it even rstart the server - no success.
If i run my script manually it returns me the expected output.
part of my script (/root/sd.sh):
Code:

#!/bin/sh

echo -n "Checking Raid... "
RAID=`tw-cli /c0/u0 show status | cut -c17-31 | grep -ci OK`
RAIDSTATUS=`tw-cli /c0/u0 show status | head -n1 | cut -c17-31`
if [ $RAID -eq 0 ]; then
  VERIFYING=`tw-cli /c0/u0 show status | cut -c17-31 | grep -ci VERIFYING`
  REBUILDING=`tw-cli /c0/u0 show status | cut -c17-31 | grep -ci REBUILDING`
  if [ $VERIFYING -eq 1 ]; then
    CURRENTSTATUS=`tw-cli /c0/u0 show verifystatus | head -n1 | cut -c46-49`
  fi
  if [ $REBUILDING -eq 1 ]; then
    CURRENTSTATUS=`tw-cli /c0/u0 show rebuildstatus | head -n1 | cut -c47-50`
  fi
  echo "Raid is busy (Raid $RAIDSTATUS$CURRENTSTATUS)"
  exit 1
fi
echo "Raid is idle (Raid $RAIDSTATUS)"

echo -n "Checking for logged in Users... "
USERS=`who | wc -l`
if [ $USERS -gt 0 ]; then
  echo "Users online"
  exit 1
fi
echo "None logged in"

crontab -l :
Code:

root@monster:~# crontab -l
# Edit this file to introduce tasks to be run by cron.
#
# Each task to run has to be defined through a single line
# indicating with different fields when the task will be run
# and what command to run for the task
#
# To define the time you can provide concrete values for
# minute (m), hour (h), day of month (dom), month (mon),
# and day of week (dow) or use '*' in these fields (for 'any').#
# Notice that tasks will be started based on the cron's system
# daemon's notion of time and timezones.
#
# Output of the crontab jobs (including errors) is sent through
# email to the user the crontab file belongs to (unless redirected).
#
# For example, you can run a backup of all your user accounts
# at 5 a.m every week with:
# 0 5 * * 1 tar -zcf /var/backups/home.tgz /home/
#
# For more information see the manual pages of crontab(5) and cron(8)
#
# m h  dom mon dow   command
*/10 * * * * /root/sd.sh | logger
*/30 * * * * /root/dropbox.sh > /dev/null

syslog:
Code:

Mar 21 09:10:01 monster /USR/SBIN/CRON[3998]: (root) CMD (/root/sd.sh | logger)
Mar 21 09:10:01 monster logger: Checking Raid... Raid is busy (Raid )
Mar 21 09:17:01 monster /USR/SBIN/CRON[4045]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Mar 21 09:20:01 monster /USR/SBIN/CRON[4105]: (root) CMD (/root/sd.sh | logger)
Mar 21 09:20:01 monster logger: Checking Raid... Raid is busy (Raid )
Mar 21 09:30:01 monster /USR/SBIN/CRON[4266]: (root) CMD (/root/sd.sh | logger)
Mar 21 09:30:01 monster /USR/SBIN/CRON[4265]: (root) CMD (/root/dropbox.sh > /dev/null)
Mar 21 09:30:01 monster logger: Checking Raid... Raid is busy (Raid )

when i run sh /root/sd.sh
Code:

root@monster:~# sh /root/sd.sh
Checking Raid... Raid is idle (Raid OK)
Checking for logged in Users... Users online
root@monster:~#

Any ideas why? - any help or thoughts appreciated

regards
Pat

I've been using this a lot:

find <directory to start search at> -name "<files to search in>" -type f | xargs grep "<string to search for>"

e.g.

find /usr/include -name "*.h" -type f | xargs grep "#define UINT"

now what if I wanted to output the results to a file?

Hello,

I cannot understand why the symlink I have put in /etc/cront.daily won't work. It is very possible I am wrong, but my understanding is that cront.{daily,weekly,monthly} works fine with symlinks.

Basically it is double symlink-ed. ls -la on /etc/cron.daily looks like this:

Code:

... 
lrwxrwxrwx  1 root root    49 Nov 27 18:26 rsync_mysql_backups.sh -> /home/myuser/scripts/bash/rsync_mysql_backups.sh
...

Now, ls -la on /home/myuser/scripts looks like this:

Code:

...
lrwxrwxrwx 1 myuser myuser    26 Sep 20  2013 scripts -> /media/md1_storage/scripts
...

I couldn't see anything suspicious in syslog, so I installed postfix in the hope that I will get some sort of information there. Nothing... I also redirected the output of the script to a file in /home/myuser/log.txt but nothing there. The file was not even created.

I am not doing anything mad in the script, I am just synchronising a local directory with a remote one like this:

Code:

/usr/bin/rsync -avzx -e 'ssh -i "/home/myuser/.ssh/myremotehost/id_rsa"' /media/md1_storage/backups/stuff/ myuser@myremotehost:/srv/backups/stuff/ >> /home/myuser/log.txt 2>&1;

As other people suggested in similar threads, I have verified that
Code:

test -x /usr/sbin/anacron

is false, which will result in the execution of the second part of the entry in /etc/crontab:

Code:

25 6    * * *   root    test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily )

Any input will be much appreciated. I know I am doing something wrong, but I just cannot see it right now... How can I gather more debugging which will help me understand what's going wrong?

Thanks!

I have a small script1 scheduled via cron to run every 20 mins to invoke script2 if script2 is not running.
When i run script1 from cmd line it works fine but when it is scheduled via cron it doesn't work. Not sure what am i doing wrong here.
I even tried to use absolute path.

Script 1
Code:

#!/bin/sh
/bin/ps -ef |/bin/grep script2.sh |/bin/grep -v $$ > /dev/null 2>&1
if [ $? -ne 0 ]
then
/usr/bin/nohup /home/user1/script2.sh &
fi

CRON LOG :
Feb 9 17:00:01 server1 crond[29771]: (user1) CMD (/home/user1/chk_script1.sh >/dev/null 2>&1)
Feb 9 17:20:01 server1 crond[21095]: (user1) CMD (/home/user1/chk_script1.sh >/dev/null 2>&1)
Feb 9 17:40:01 server1 crond[11218]: (user1) CMD(/home/user1/chk_script1.sh >/dev/null 2>&1)
Feb 9 18:00:01 server1 crond[29961]: (user1) CMD(/home/user1/chk_script1.sh >/dev/null 2>&1)

CRON JOB :
00,20,40 * * * * /home/user1/chk_script1.sh >/dev/null 2>&1

Hi

I am using Centos 6.5 and i am testing Glusterfs.

I have at /etc/hosts :

Code:

123.456.789.000 host1
000.987.654.321 host2

And they can ping each other and all working great...

Glusterfs requires this command:

Code:

mount host1:/gluster-vmstore /home/nginx/public -t glusterfs

and if i run it manually it works great.

But when i restart checking using df -h is gone and is not working until i run it again manualy

I found on a tutorial that this edit on /etc/fstab will work after restart:

Code:

host1:/gluster-vmstore /home/nginx/public glusterfs defaults 0 0

But after restarting it was not working

Any ideas?

Thanks

Hi there. I have Ubuntu 14.04 installed. Actually I have been doing a lot of work in this OS for about a year. The thing I cannot still comprehend is how to find files I installed. In this particular case I need glut.h for g++ compiler. So I go here, do this command;

Code:

sudo apt-get install freeglut3-dev

And find out that I already have the newest version (which I have suspected since I recall installing it).

So, the next step is to find the glut.h file and reference it with #include command. I cannot find it anywhere. This website says it has to be he

Code:

/usr/lib/x86_64-linux-gnu/libglut*

Why's the asterisk? Is it a footnote or part of the code?

I don't seem to have /usr/ directory. I cannot find it anywhere.

How does Ubuntu directory work?

Thanks, - A.