Compat-libstdc++ Package For CentOS

Hi
recently I installed elementary freya os
evey thing was ok with installing chrome ,qbittorent,ubuntu extras,vlc
but with virtual box I got this error
Package dependencies cannot be resolved
details

virtualbox-qt: Depends: libgcc1 (>= 1:4.1.1) but 1:4.9.1-0ubuntu1 is to be installed
Depends: libgl1 but it is a virtual package
Depends: libqt4-network (>= 4:4.5.3) but 4:4.8.5+git192-g085f851+dfsg-2ubuntu4 is to be installed
Depends: libqt4-opengl (>= 4:4.7.2) but 4:4.8.5+git192-g085f851+dfsg-2ubuntu4 is to be installed
Depends: libqtcore4 (>= 4:4.8.0) but 4:4.8.5+git192-g085f851+dfsg-2ubuntu4 is to be installed
Depends: libqtgui4 (>= 4:4.8.0) but 4:4.8.5+git192-g085f851+dfsg-2ubuntu4 is to be installed
Depends: libstdc++6 (>= 4.6) but 4.8.2-19ubuntu1 is to be installed
Depends: virtualbox (= 4.3.10-dfsg-1ubuntu5) but 4.3.10-dfsg-1ubuntu5 is to be installed

I tried apt-get update
apt-get upgrade and dist-upgrade & autoclen
and almost anything there
now even when trying to install any thing else it tells me there is broken packages !!!
it happend first with vlc
but apt-get update & autoclean solve it now it doesn't

Hello All

I am still working out the basics of Linux.
I have a Centos 7 install. I cannot get this RPM to install. It installs fine under Centos 6.

What am I doing wrong? I really need a GUI Find and Replace program!
--skip broken does not work either.

Thanks in advance
Scott

[root@server ~]# yum localinstall regexxer-0.9-1.el5.rf.x86_64.rpm --skip broken
Loaded plugins: fastestmirror
Examining regexxer-0.9-1.el5.rf.x86_64.rpm: regexxer-0.9-1.el5.rf.x86_64
Marking regexxer-0.9-1.el5.rf.x86_64.rpm to be installed
Skipping: broken, filename does not end in .rpm.
Resolving Dependencies
--> Running transaction check
---> Package regexxer.x86_64 0:0.9-1.el5.rf will be installed
--> Processing Dependency: libatkmm-1.6.so.1()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64
Loading mirror speeds from cached hostfile
* base: mirror.keystealth.org
* epel: mirror.hmc.edu
* extras: mirror.keystealth.org
* rpmforge: mirror.hmc.edu
* updates: mirror.keystealth.org
--> Processing Dependency: libcairomm-1.0.so.1()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64
--> Processing Dependency: libgdkmm-2.4.so.1()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64
--> Processing Dependency: libglade-2.0.so.0()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64
--> Processing Dependency: libglademm-2.4.so.1()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64
--> Processing Dependency: libgtkmm-2.4.so.1()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64
--> Processing Dependency: libpangomm-1.4.so.1()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64
--> Processing Dependency: libpcre.so.0()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64
--> Running transaction check
---> Package atkmm.x86_64 0:2.22.7-3.el7 will be installed
---> Package cairomm.x86_64 0:1.10.0-8.el7 will be installed
---> Package gtkmm24.x86_64 0:2.24.2-8.el7 will be installed
---> Package libglade2.x86_64 0:2.6.4-11.el7 will be installed
---> Package pangomm.x86_64 0:2.34.0-3.el7 will be installed
---> Package regexxer.x86_64 0:0.9-1.el5.rf will be installed
--> Processing Dependency: libglademm-2.4.so.1()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64
--> Processing Dependency: libpcre.so.0()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64

Packages skipped because of dependency problems:
atkmm-2.22.7-3.el7.x86_64 from base
cairomm-1.10.0-8.el7.x86_64 from base
gtkmm24-2.24.2-8.el7.x86_64 from base
libglade2-2.6.4-11.el7.x86_64 from base
pangomm-2.34.0-3.el7.x86_64 from base
regexxer-0.9-1.el5.rf.x86_64 from /regexxer-0.9-1.el5.rf.x86_64

I have download Centos 6.5 and 6.5 and then install it on Virtualbox , but it is wonder that it do not prompt to ask to select what package need to be install during the installation process .

I checked that only 700M HD space is used to insall , therefore , it should be only minimal installation .

what I have download is CentOS-6.5-i386-bin-DVD1 and CentOS-6.6-i386-bin-DVD1 , the file size is 3.8G .

would advise how can I select package to install or run full install ?

thanks.

Trying to install traceroute on Ubuntu 14.04.2. I get:
apt-get install traceroute
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package traceroute is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'traceroute' has no installation candidate

Hello there,
First of all thank you for making me a part of this forum.
Secondly, here is the problem..
I am facing this problem in honeyd installation during "make"

root@kali:~/Desktop/Narayan/honeyd-1.5c# sudo make
make all-recursive
make[1]: Entering directory `/root/Desktop/Narayan/honeyd-1.5c'
Making all in .
make[2]: Entering directory `/root/Desktop/Narayan/honeyd-1.5c'
gcc -DHAVE_CONFIG_H -I. -I. -I. -I./ -I./compat -I/usr/local/include -I/usr/local/include -I/usr/local/include -O2 -Wall -g -DPATH_HONEYDINCLUDE="\"/usr/local/include/honeyd\"" -DPATH_HONEYDDATA="\"/usr/local/share/honeyd\"" -DPATH_HONEYDLIB="\"/usr/local/lib/honeyd\"" -DHONEYD_PLUGINS_DECLARE="" -DHONEYD_PLUGINS="" -DPATH_RRDTOOL="\"\"" -c honeyd.c
In file included from honeyd.c:97:0:
tagging.h:89:6: error: expected declaration specifiers or ‘...’ before ‘(’ token
tagging.h:89:6: error: expected declaration specifiers or ‘...’ before ‘(’ token
In file included from stats.h:36:0,
from honeyd.c:98:
./compat/sha1.h:23:3: warning: ‘__bounded__’ attribute directive ignored [-Wattributes]
./compat/sha1.h:23:3: warning: ‘__bounded__’ attribute directive ignored [-Wattributes]
./compat/sha1.h:26:3: warning: ‘__bounded__’ attribute directive ignored [-Wattributes]
./compat/sha1.h:28:3: warning: ‘__bounded__’ attribute directive ignored [-Wattributes]
./compat/sha1.h:30:3: warning: ‘__bounded__’ attribute directive ignored [-Wattributes]
./compat/sha1.h:32:3: warning: ‘__bounded__’ attribute directive ignored [-Wattributes]
./compat/sha1.h:35:3: warning: ‘__bounded__’ attribute directive ignored [-Wattributes]
./compat/sha1.h:35:3: warning: ‘__bounded__’ attribute directive ignored [-Wattributes]
make[2]: *** [honeyd.o] Error 1
make[2]: Leaving directory `/root/Desktop/Narayan/honeyd-1.5c'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/root/Desktop/Narayan/honeyd-1.5c'
make: *** [all] Error 2

I found a similar thread in this forum as well to solve the above problem by using "apt-get install honeyd" but didnt quite worked for me.

root@kali:~/Desktop/Narayan/honeyd-1.5c# apt-get install honeyd
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package honeyd


I tried researching but couldnt find any solutions. Moreover, I am really a newbie at Kali Linux and other debians as well.
I would appreciate if somone could help me.
Thank you.

Hello everybody

I am running Linux Mint 17.1 Rebecca with the Cinnamon Desktop.

I have experiences with the ubuntu derivatives and ffmpeg and avconv are always avavilable the repos, this time both aren't available

Here are the commands I typed:

apt-get update ; apt-get upgrade

After the packages were upgraded. I ran these commands. Below are there outputs.

Quote:
apt-get install ffmpeg
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package ffmpeg is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'ffmpeg' has no installation candidate

apt-get install avconv
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package avconv
This nevered happened to me before with linux mint in prior versions.

Any ideas?

Hello

I try to install the epel repository so I can install ejabberd.

I do not have epel, it seems :

Code:

[root@serv src]# ls /etc/yum.repos.d/
CentOS-Base.repo  CentOS-Debuginfo.repo  CentOS-fasttrack.repo  CentOS-Media.repo  CentOS-Vault.repo  n2.repo

So I try to install epel :

Code:

[root@serv src]# rpm -Uvh http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
Retrieving http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
Preparing...                ########################################### [100]
	package epel-release-6-8.noarch is already installed

But when I try to install ejabberd :

Code:

[root@serv src]# yum install ejabberd
Loaded plugins: downloadonly, fastestmirror
Setting up Install Process
Loading mirror speeds from cached hostfile
 * base: ftp.nluug.nl
 * extras: ftp.nluug.nl
 * updates: ftp.nluug.nl
No package ejabberd available.
Error: Nothing to do

Something is wrong with epel.

Hello all.

I'm using RHEL 6.5 Workstation and have a single RHEL system connected to the internet do download rpms based on Security Notices from Red Hat. While on the RHEL system and internet I perform the below:

yum install --downloadonly --resolve --downloaddir=<directory> <package>

My goal is to ensure I capture any dependencies (which is a nightmare)and thus I use the --resolve. When I update my RHEL systems not connected to the internet I perform a yum update. For some yum updates it's goes pretty smooth but for others I'm constantly getting errors about conflicts or other similar errors. An example of when yum updates don't work can be seen below:

Resolving Dependencies
--> Running transaction check
--> Processing Dependency: freetype = 2.3.11-5.el6 for package: freetype-devel-2.3.11-5.el6.x86_64
---> Package freetype.x86_64 0:2.3.11-15.el6_6.1 set to be updated
--> Finished Dependency Resolution
Error: Package: freetype-devel-2.3.11-5.el6.x86_64 (@anaconda-RedHatEnterpriseLinux-201009221801.x86_64/6.0)
Requires: freetype = 2.3.11-5.el6
Removing: freetype-2.3.11-5.el6.x86_64 (@anaconda-RedHatEnterpriseLinux-201009221801.x86_64/6.0)
freetype = 2.3.11-5.el6
Updated By: freetype-2.3.11-15.el6_6.1.x86_64 (security)
freetype = 2.3.11-15.el6_6.1
You could try using --skip-broken to work around the problem
VRTSralus-14.1.1786-0.x86_64 has missing requires of libstdc++.so.5()(64bit)
VRTSralus-14.1.1786-0.x86_64 has missing requires of libstdc++.so.5(CXXABI_1.2)(64bit)



[root@system12 security]# yum update freetype-2.3.11-15.el6_6.1.x86_64.rpm
Loaded plugins: refresh-packagekit, rhnplugin
This system is not registered with RHN.
RHN support will be disabled.
Setting up Update Process
Examining freetype-2.3.11-15.el6_6.1.x86_64.rpm: freetype-2.3.11-15.el6_6.1.x86_64
Marking freetype-2.3.11-15.el6_6.1.x86_64.rpm as an update to freetype-2.3.11-5.el6.x86_64
Resolving Dependencies
--> Running transaction check
--> Processing Dependency: freetype = 2.3.11-5.el6 for package: freetype-devel-2.3.11-5.el6.x86_64
---> Package freetype.x86_64 0:2.3.11-15.el6_6.1 set to be updated
--> Finished Dependency Resolution
Error: Package: freetype-devel-2.3.11-5.el6.x86_64 (@anaconda-RedHatEnterpriseLinux-201009221801.x86_64/6.0)
Requires: freetype = 2.3.11-5.el6
Removing: freetype-2.3.11-5.el6.x86_64 (@anaconda-RedHatEnterpriseLinux-201009221801.x86_64/6.0)
freetype = 2.3.11-5.el6
Updated By: freetype-2.3.11-15.el6_6.1.x86_64 (/freetype-2.3.11-15.el6_6.1.x86_64)
freetype = 2.3.11-15.el6_6.1
You could try using --skip-broken to work around the problem
VRTSralus-14.1.1786-0.x86_64 has missing requires of libstdc++.so.5()(64bit)
VRTSralus-14.1.1786-0.x86_64 has missing requires of libstdc++.so.5(CXXABI_1.2)(64bit)
[root@system12 security]#

Is there something I'm not doing correctly? Again some work and some do not, as seen above the example where it does not work. Is this a larger problem? Although I'm using RHEL 6.5 on the system where I obtain my security updates are my RHEL 6.5 systems which are not connected to the internet so different (in regards to what files are installed) that dependencies differ greatly and I'm not fully appreciating the environment for my off-line systems?

A million thanks in advance,
Johnny Mac

I use Centos 7 and have just installed vsftpd to the server , I want to start vsftp service after install , when I tried the command "systemctl |grep vsftp" , it show nothing .

I use previous , all services keep at /etc/rc.d/init.d , what I need to do is /etc/rc.d/init.d/vsftpd start .

Please advise what I need to do for Centos 7 to start vsftpd ?

thanks

I am getting Following output after running installation of some packages.

it gives me such error

rpmts_HdrFromFdno: Header V3 RSA/SHA1 Signature, key ID c105b9de: BAD


What causing this ? i have downloaded the latest key from
http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-6 and check it, the key is fine under my system /etc/pki/rpm-gpg

Configuration files of respo are also fine under /etc/yum.rpos.d/CentOS-Base.repo

Kindly help