Hi,
Could anyone please explain as understandable as possible how could I on my Windows 8 open either single file or install (and use) entire software which is supposted to work on Linux and/or Ubuntu? I have absolutelly NO experience with Linux and have never used it. Honestly, I don't know if there is any difference between Linux and Ubuntu. I want to be inside my Windows 8 while using Linux files/sofware. The only solution I could think of are actually two but neither of them is useful for me:
1. Vmware (i don't know how to use it)
2. Rent remote computer (vps/rdp) with linux OS installed (this would let me be in Windows 8 while being able to use Linux file/software [on remote computer] but sooner or later I would want to have Windows installed there too)
Tried program Linux Reader but didn't work on my Windows 8. Although I would need solution for installation/usage of software (that can be used only on linux/ubuntu), regardless of details***, the current problem is basically related to single files only: I have two files, both in IMG extension. Don't know how to open them because Deamon Tools doesn't handle IMG. The problem is that filesystem in one of them is "Linux" and filesystem in another is "142". The error I am getting when I try to open them is:
"File with harddrive/disc snapshot is corrupted."
But this is most likely because they are supposted to be used in linux environment, hence such question.
*** when i said "details" I was referring to basically anything: type of software, size, purpose, whether or not it needs network connection, whether or not it contains logging in (username password, etc) requirement, etc.
The following solution for current situation (quoted error above) works only partially:
http://www.sysprobs.com/simple-tip-h...thout-software
I am able to open/run/mount IMG if I do what is described on this link (im basically opening iso in this case - see the website) but when opening the virtual drive, the following error message proves that the file can be used in linux/ubuntu only:
"Windows cannot access that drive. Drive could be corrupted. Make sure the drive is in condition that can be recognized by Windows. If drive isn't formatted then format it before usage."
Would need detailed instructions, for total beginner, who has never used linux/ubuntu, what to do in such case: how to use in win8 files/software that are supposted to be used in linux/ubuntu. Also answer on how to open IMG would be highly appreciated.
Kindest regards and thank you a million in advance.
Good day everyone,
I'm currently a student and as far as I'm aware I still need windows for some program I need, but I am going over to Linux.
(Thus I'm running Windows 8 at this moment)
Today I was going to install Ubuntu 14.04.01 alongside Windows 8, everything went well till I hit the 4th step (Installation type page) of the installation:
A message like follows showed:
"This computer currently has Debian GNU/Linux (Kali Linux 1.0.7) on it. What would you like to do?"
There are then 3 options available:
1) Install Ubuntu alongside Debian GNU/Linux (Kali Linux 1.0.7)
2) Replace Debian GNU/Linux (Kali Linux 1.0.7) with Ubuntu
3 and 4 is greyed out.
5) Something else (You can create resize partitions yourself, or choose multiple partitions for Ubuntu.
I just want to make sure what option to choose, I cant afford to lose all my data and windows.
Problem: Showing Kali Linux as current OS and not Windows 8.
Possible reason for showing Kali Linux as current OS:
I have a live CD of Kali Linux and ran it a few times in the past, but according to my knowledge it shouldn't have changed anything.
Maybe the 1st option is still the right one even though the current OS isn't listed right? Or the 3rd option is like a manual setting I guess.
Thanks for the time reading and helping!
Hi. Sorry to be so stupid, but I just managed to load and install this Linux (which I really like a lot) on my previously windows <--(bad) system.
But now I need to upgrade some software (like Adobe flash), and I have no clue how to do this. I understand I should go to my original linux distrubutor, and select software thru them (my "Linux distro").
But actually, it's been awhile since I did the install, and I dont exactly remember where I even got this distribution. (I know, I'm dumb--sorry).
Is there a way I can look at my linux system files and see who my distribution is thru, and where is their website. Or would it be easier if I just went thru the whole download and install of linux again <--(not really looking forward to that).
Or even, am I wrong about going thru the distro to do installs/upgrades?
Anything you can tell me will be greatly appreciated.
Long Live Linux !! David K
Good evening;
Following instructions on-line I attempted to create a bootable USB drive (32GB Sandsik extreme) with Linux 17.1 installed to enable a trial before attempting a permanent install beside windows 7 on a new computer with Win7 prof. installed.
On the usb I see a 4.0 GB area highlighted in G Parted but not accessible from the Linux file manager. This shows up as a ~1.4 GB sub-directory titled casper. and also as 4.0 GB 'file' named casper-rw. Can anyone explain what is the purpose of this sub-directory? The software I used to create the usb bootable drive and install Linux to is 'Universal-USB-Installer-1.9.5.9'. This is a windows executable. My intent was to create a bootable usb drive for Linux that also contained my required hardware drivers, etc. This doesn't appear to be working 100%; although Linux 17.1 boots the nvidia hardware drivers do not appear to be available even though I downloaded these and they are on the same usb. On boot-up a message box indicates that hardware acceleration is not enabled and higher than normal processor usage may occur.
Any assistance / direction, etc. would be greatly appreciated.
Regards;
Mike
Hi, please excuse any misunderstanding about the title.
I'm an experienced computer user, but not with Linux. As a matter of fact, even with Windows, I only do so much at the command prompt.
I am looking for a very fast (boot and etc.) Linux system, that has nothing more than a command prompt. No X-Windows. However, I would like to configure X-Windows immediately after an installation.
I noticed the LFS project. Very cool, but way too complex for me. It is exactly what I'm looking for, except, I would like the basic system to already be proven, maybe even with security updates.
The biggest most important thing is (ONLY WHAT I WANT). I don't want dozens of browsers, a hundred text editors, or any other cool or stupid open source or commercial software. I simply am looking for what Dos 6.22 was in Linux.
There are many distros. Can you guys help me pick one out that is light, secure and ready to be configured to run X windows or X-Free or Xorg, I'm not sure what the best is right now.
PS: I'm a linux noob, but I have had several decent installations of Ubuntu, and some experience with the command line, including compiling software, but still a beginner.
Hey guys, im a long time Mac user but I want to have a Linux computer in my office for web based stuff and fixing hard drives.... I'm going to buy a used computer from eBay to install my Linux software as I believe that Linux is a lot faster than Mac or windows and doesnt need the latest hardware to compete.
In order to be at least as fast as a windows computer but no more than $100. What range of computer should I be looking at? What specs should I look for? And once I get it should I run Ubuntu or mint for web based things and hard drive repair? As you no doubt know, the Linux lingo is a bit difficult sometimes so please bear with me. I'm doing the best I can.
Weird question I know, but I'm sure you know what I mean.
Hello Everyone
I have installed Ubuntu Server on a 500 GB drive formatted as EXT4.
Of of my Media, movies, music and pictures are from Windows PC's formatted in NTFS.
As all of the computers connecting to the server will be windows based will NTFS be fine or will I have to reformat them to work. The two media drives are 2 x 2GB Sata drives.
Could you tell me if this setup would work or will I have to reformat and and transfer the files to a new filesystem.
Also as a file server whats the best linux file system to use so it will work with windows PC's in a lan flawlessly.
Thanks for you expertise.
Regards
Hello
As a learning experience, I want to jump from Windows 7 to Linux full time on my laptop. This isn't because of some antiWindows bullshit or because its free or anything like that. I just want to learn the ins and outs of Linux like I pretty much know on Windows.
I plan to go with Ubuntu. LTS or latest stable version? Thoughts?
First off, compatibility. I do need that all my hardware on my laptop be compatible. From shortcut keys to wifi. This is not a brand new laptop so there shouldn't be any problems. Its a Dell Vostro 1510.
Next, software. Basically on this laptop software I use in and out: uTorrent, Teamviewer, WMP, mIRC, Skype, vSphere Client, Microsoft Office......That's pretty much it IMO. Also Facebook and YouTube (Flash) are a must. I will run all this software in WINE. I don't want (most) of the Linux ports. Im not looking to replace programs I like and use daily. Just looking to replace the operating system.
Next, virtualization. Due to some things (like Office) cannot be ran in Linux, I use a VM. VMWare with its unity feature pretty much gives me what I want.
Next, streaming. I need to be able to stream media from a WS2012R2 to this Linux installation. Special setup?
Anything that is blowing over me, please mention.
Thank you
i have windows 8.1 and ubuntu 14.04 ....now wen i try to access a drive of windows in ubuntu it says failed to mount.
then i used "sudo ntfsfix /dev/sda4" for mounting the drives ......it worked for all drives except the E drive (not the system drive).
it gives error windows is hibernated , shutdown windows.
I shutdown my windows properly but still that particular drive refuses to mount..
any solns?
(BTW I'm running Xubuntu 15.04)
I'm starting to understand Luckybackup. And gold_finger said:
Quote:
Assuming your Xubuntu filesystem is Ext4, example of doing initial backup would be something like this:
* Spare USB with large partition formatted as Ext4 and labeled "BACKUPS"
I know the EXT4 is more friendly to Linux but all my flash drives are FAT32 (and I'll be backing up to those flash drives) and I'd really like to keep them that way (because sometimes I do plug them into Windows machines--and I know FAT32 works with both Windows and Linux). So is there any reason I would have to use Ext4 and not FAT32 in backing up stuff in LuckyBackup?
I confess to great ignorance about the difference between the EXT and FAT formats. Like if I do format a flash drive to EXT 4 and want to plug the flash drive into a Windows computer it just doesn't work? Like, what's the advantage to using EXT4 then if FAT 32 works with Linux and Windows? What are the disadvantages to using EXT4?
Thanks.
Dear All
I need your help.
I want to get a file from windows server using ftp.
Below is the script I have created but the connection is not established:
#!/bin/sh
lcd "directory in linux server"
USER="username of windows server"
PASS="password"
ftp -n "ip of windows server" <<EOF
user $USER $PASS
cd "C:\Users... directory in windows server where file is located"
bin
get test1234.txt
bye
EOF
I hope somebody can help me!
BR,