Wireless Has Bad Connection From RT-N66R Gigabit Router

I have several computers connected to a D-Link DIR605L router, two with ethernet cables and two through wifi. The Windows XP computer can see itself and nobody else. The Ubuntu (trusty) desktop and Ubuntu (lucid) netbook computers see nobody (unable to retrieve file list from server) and the Windows Vista computer only sees itself. Clearly, I have failed to configure something or a set of somethings.
Do I have to have one of the computers always on, acting as some kind of file server or can the router do this job? This is a new router. My old one (whose power supply went phut) connected everybody without arguing about it and we could share files around, even with a mix of OSs.
Since this is a local network only, I have no firewalls enabled, as far as I know ...
All of the network set-up posts I've found rabbit on about how to get your internet connection working through your router, which is not an option for me. I have dial-up working on the XP computer and a mobile wireless USB dongle for internet access on the trusty desktop.
I've installed samba and a few other packages, but so far, none of them have solved my problem. Can someone please tell me where to start and which tutorials to read? If I have to set up a computer as a file server, I guess it will have to be the XP thing, as it's the only one that is always running, but I'd like to avoid that, if possible, as I speak XP worse than I speak Ubuntu.
BTW, D-Link are no help at all, two hours on the 'phone and they were still trying to get me to connect to an ADSL service I don't have ...

I have installed Linux Mint 17.1 Qiana Cinnamon on to a Compaq Presario R3000 and cannot use the wireless connection. I am totally lost. I can get the wired connection, but the wireless is not there. I have tried to establish the connection, but I do not understand the lingo like BSSID of my router. I have entered the MAC address but do not know how to clone it. Help!

Given: Laptop o/s:Xandros 3.0.3 Business Ed
Hardwa dell c840laptop

Question: How do I get this laptop to recognize this wireless chip. I know from prior research and experience this chip is optimal for this laptop (used it on winxp)

Hello, My issue is very common but, not able to resolve it.

Issue I am facing with my Linux (RHEL-5 32-bit) machine, where I am not able to connect to internet.

DWR-113 - D-Link Router is configured for 3G dongle (Vodafone India) - This setup is done via WiFi and not using the provided LAN cable from Win7 machine.

Internet is working absolutely fine in case of Wireless but, at same time when LAN cable is used internet is not working. [Able to ping to Router IP i.e. 192.168.0.1)

Similarly, from Linux box, ping to Router IP is working [LAN plugged] but, Internet not working. IP of linux machine: 192.168.0.60

Also, able to get the console connection of Linux from Windows box..[Windows connected to Router via WiFi and Linux connected to Router via LAN cable]

Please suggest how to get rid of this problem so that Internet will work on Linux via LAN cable.

Many Thanks,

I am new to linux and My distribution is Kubunto. My wireless Icon shows that my connection to my router has been deactivated and will not allow me to connect to internet or give me an option to connect with a password. I cannot find the application in kubunto that walks me through the connection process. Is there such a program and what is its name. Thanks from a newbie

Have had ongoing problems with wifi since I built my PC. It was like it is now when I first built it, I tried bits I found online to try and fix it and evntually it just started working out of the blue, when I hadn't changed anything. A few weeks ago it just reverted to how it was before

Very rarely it works normally, except it will only see my network (always about 60-70% strength) and not the other 3 in range
Sometimes it will say it is connected but not be able to download anything, and wont even load up the router homepage
Sometimes it connect and run for a few minutes before dropping and not being able to reconnect
Most often it will see my network and all others in range but wont connect
Sometimes it wont see my network at all, but will see others in range
Sometime network manager wont even show wireless up as an option just "nwtwork cable unplugged"

My 2 HDDs are on Mint 17.1, one is 64bit one 32bit. Motherboard is Gigabyte GA-970A-DS3P. I have 3 wifi adapters, one belkin, one realtek, and one "Think Penguin" one I bought especially from USA thinking it would be an easy fix. All have same problem, but all work on my other older PC properly with about 50-60% signal strength (same OS 32 bit)

I have no idea where to start

I'm experiencing something kind of weird.

When I test my network speed (Speakeasy and speedtest) I get about 25/25mbps. Internally however although unmeasured it seems to be full 100mbps. Other computers and devices on wireless are getting about 50/50 mbps on the same tests. The problem is definitely specific to this laptop and specifically outside the local network.

Any thoughts?

Hi I am not a complete Linux newbie, but I have a challenge that is new to me.

I am wanting to be able to connect to a linux box (Raspberry Pi running Debian) via ssh directly from a single computer. I want to be able to plug in a ethernet cable from a laptop to the Raspberry Pi so that I can configure it via ssh or a webpage.

I have had a few pieces of hardware, routers, printers etc that allow this sort of connection for configuration, I just would like to know how it is done.

My question is how do I set up the /etc/interfaces file to allow the Raspberry Pi to be found by the laptop.

Once configured I would want the Raspberry Pi to obtain its IP address via DHCP when connected to a network.

Any suggestions, ideas would be appreciated.

Hello everybody,

I am seeking help regarding sharing internet connection. I would be greatful.

I have;
A Laptop : Samsung RV509, i3, 300GB HDD, 3GB Ram, Dual boot Windows7 & LM 17 cinnamon 32bit. WiFi & Bluetooth available. A Desktop PC : Celeron CPU 2.4GHZ, 40 GB HDD, 1GB RAM, LiveUSB-LM 17 cinnamon 32bit, No WiFi hardware available, No Bluetooth hardware available. A mobile phone : Nokia Asha 500, WiFi & Bluetooth available. An old USB data cable: with which the mobile phone can be connected to the computers. I have successfully connected and transfered data back & forth, and also shared/connected Mobile-Broadband-internet to both Laptop and Desktop.

What I have been doing now is; I have an internet connection to my Laptop with an external modem and Ethernet. Its working fine. I have an unlimited plan and so I want to share this internet connection on the mobile phone too; instead of incuring extra cost by connecting to the internet directly through the phone. I am successful at that. I can share this internet connection on my phone through WiFi.

Now, what I want to do is; without buying any extra hardware, to share this same internet connection on my Desktop PC, too.

What I tried is; I searched the web, but didn't find any solution. Now I am here. Please kindly help me.

Thank you & Regards

Anil

I'm a Newbie and I'm wanting to know if it's possible to have a automatic script to connect to my home wireless connection after it has failed to locate an ethernet connection (and before logon).

If so, what details should be in the script and where should the script be placed?

Thank you for any assistance you may provide.