Mounting Network Share With Arch Linux: Need Rpcbind At Boot Time

Hi. I've installed Arch Linux on a Wandboard running Logitech Media Server (LMS). LMS needs to read my music files off of a NAS network share. I can't figure out how to mount that network share.

I was told by someone who has a similar NAS to make the following entry in etc/fstab:

//192.168.10.15/media/Music /mnt/netdrive cifs noauto,x-systemd.automount,user=nobody,password="",iocharse t=utf8,noperm,nounix,nobrl 0 0

But when I start LMS and point it to /mnt/netdrive, my media/Music folder isn't shown. Is there a problem with the way I'm trying to mount the network share?

I've tried using "root" and "admin" as username and the admin password of the NAS as password, but still no luck. I've tried mounting the share manually, but I get a "permission denied" error.

Any help would be greatly appreciated.

I have setup a dual boot system with Fedora 21 and Arch Linux. The problem is that Fedora doesn't see my encrypted Arch installation. The installations are on separate partitions and do not share anything apart from hard disk space. I have run the following commands as root in Fedora:

Code:

grub2-install /dev/sda

Code:

os-prober

Code:

grub2-mkconfig -o /boot/grub2/grub.cfg

When I rebooted, Fedora was the only OS entry showing in the GRUB menu.

There was a suggestion from one of the members of the Arch forums that I should write the entry myself into /etc/grub.d/40_custom and then re-build the grub configuration or take the Arch entry from Arch's /boot/grub/grub.cfg and just paste it into the 40_custom in Fedora and rebuild.

How do I boot from a live Arch USB stick into the installed Arch and do as stated above? How would it work? Thanks in advance for your replies.

OK this is kinda long, so I will shorten it as much as I can, as to not be long-winded.

My current network at home:
1 - CentOS 7 desktop (server)
1 - Ubuntu 14.04 desktop
1 - Fedora 21 laptop
2 - Windows 7 desktops
some other various windows boxes also that don't get used regularly, but are on the network.

My 2 Linux desktops (which I use as servers, but they really aren't) have shared folders on them, which I share to the network via Samba (CIFS). I use Samba because Linux is smarter than Windows and Windows won't read NFS, so I share them as Samba so all devices can see them.

Generally speaking, if I share the folders on each box as 0777, I have no issues. But lately I have been wanting to implement some better security, so I wanted to SETGID and chown the shared folders from the local machine to a specific group, then change the folders to 2774.

My problem is that I keep getting permissions errors when trying to connect from the other Linux machines, and sometimes the Windows machines also. My main question is: do I CHMOD 2774 the local mount-point before mounting it? Or so I CHMOD 2774 the shared folder on the other server, then mount it locally to a folder whose permissions are different? Or do I CHMOD both of them the same?

basically the uis and gid ownerships change on a local folder when I mount a shared drive to that folder, so when I try to write or sometimes read that local folder, I get permissions errors.

I can provide any additional info needed.

Hi all. I can't connect to my Win 8.1 box from Linux Mint. I can ping the Win box successfully. I can access my Linux share from my Win box. It seems like the problem is with windows. I've been working on this problem for about three days now with no luck. I've uninstalled Norton Security in my Win box. I've deactivated Microsoft's firewall. Not helping. My smb.conf is:

[homes]
read only = no
security = domain
workgroup = WORKGROUP

[share]
comment = Shared Data
path = /home/gary/share
gues ok = yes
writeable = no
browseable = yes

To make things simple i created only one shared folder on my Win box, asm. On Linux i type: sudo mount.cifs //GARYZ97/asm /home/gary/share -o user=Gary ; Gary is apparently my correct Windows username. BTW, i've also tried gary.
Linux responds with: [sudo] password for gary: jj ; this is my correct sudo password
Next response is: Password for Gary@//GARYZ97/asm: ; here i have tried my Microsoft Account password; i've tried just hitting enter; i've tried jj my Linux password. I'm at my wits end. What am i doing wrong? I've googled so many different sites but no one seems to have the problem i have. Please help. I don't want to pull out all my hair. I can access my Linux share from Windows, edit it, save it, and i see the changes on my Linux box. I know i'm being repetitive here but i just can't access my Windows share from Linux. I have run testparm on smb.conf and no problems there. Almost forgot. After entering what i believe is my correct Windows password i get: mount error(115): Operation now in progress, and then on the next line, Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)

I've got my new system up and running. It's a nice fresh change after running Linux Mint for the past 4 years. Now comes the time of setting things up the way I like them.

As part of my setup, I have a all of my DVD's backed up onto my computer so that I can use a media server in the house. I run XBMC at my TV's with a central samba server (my computer) holding the movies.

In LM, all I had to do was right-click the directory "sharing" and select SMB share and type in the name. Everything else was done for me. This doesn't seem that simple.

Here's what I've done:
1. Menu > Administration > Samba
2. Entered in all the directories to share, under the BASIC tab I've selected visibile, writeable. Under the ACCESS tab I've selected a user (see below).
3. I've created a system user called xbmc with the password of xbmc.
4. I've created a samba user called xbmc with the password of xbmc.

Still not working. So, I went into the shell where I manually started the smb service:
# systemctl start smb.service

So, I went back to Menu > Administration > Samba > Preferences:
Set workgroup to WORKGROUP (but it automatically changes it to lower case after I exit).

Drop to terminal and restart service with systemctl.

I go over to my XMBC installation and try to connect to the source and it finds the SMB share. I click on it and after about 30 seconds a window pops up asking for login credentials. I enter xbmc/xbmc and after about 30 seconds it just cycles through. XMBC doesn't offer any messages, so I went downstairs to my Windows machine and tried to connect to a network drive. I enter in \\IP\share-name and after a few seconds it asks for login credentials. I enter xbmc/xbmc but then it fails with "bad username or password".

I'm not sure what I need to do to get this working.

Here is my /etc/samba/smb.conf file:
http://pastebin.com/m9ExpPJF

System Korora 21 (just installed/updated)
kernel: 3.18.9-200.fc21.x86_64

Hello,
I just want to know if it is possible to mount a share to /tmp on RHEL 6.6?

For example to mount <device hosting share>:/vol/share_name as /tmp
which is already mounted as follows:

Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/SDVol-LVtmp
1998672 512380 1381436 28% /tmp

Thank you.

I have a vps with Ubuntu 12.04 that I'm in the process of configuring. I have configued samba and been able to mount a share from my local computer to my samba share on my remote vps.

The issue is that when I go into the Samba server module and I click start, stop or restart it has no effect what so ever. I can ssh into the terminal and run $ sudo service smbd start and that will work (as well as stop/restart). However it will not work within Webmin.

I then went to the module configuration and changed the start command to: service smbd start and the same for the stop command (with "stop" though).

I then when to System > Running processes and saw that smbd is running however the list is showing "is running now" as NO. I click the start/stop button within this section and it doesn't work again.

Can anyone please help me figure this out?

Webmin 1.5.9
Ubuntu 12.04

I'm not sure if this should be in the newbie section, but I am somewhat of a newbie, so here goes:

In a home network, I have an Xubuntu file server with a Samba share that has me as the owner and authorizes me to access the share.

On another computer, I have Mint running and providing various services, including webdav on Apache with SSL. In the var/www/webdav directory of the Mint computer, I have the Xubuntu Samba share mounted. This is supposed to allow me to access the Samba share from the public internet.

Everything works fine except for one big problem: Apache requires the owner of the webdav directory to be user "www-data," and I can't figure out how to give www-data access to the Samba share, since www-data is not a user on the Xubuntu computer, and moreover I don't know the password for user www-data.

Can anyone figure out how to get around this problem? In particular, is there a way to configure the Samba share on the Xubuntu computer so that user www-data on the Mint computer can have access to it?

(Incidentally, I have my reasons for using two computers, one as a file server and one as a web server. Also, I am thinking about switching to NFS instead of Samba, but I'm not sure if even that would solve my problem.)

I banging my head, I am unable to mount samba share. Here is the info
Samba share is in RHEL 6.5
# vi /etc/samba/smb.conf
[sambashare]
comment = samba share
path = /smbdemo
guest ok = yes
browseable = yes

# ls -dZ /smbdemo/
drwxrwxrwx. root root system_ubject_r:samba_share_t:s0 /smbdemo/

# getsebool -a | grep samba
samba_create_home_dirs --> on
samba_domain_controller --> off
samba_enable_home_dirs --> on
samba_export_all_ro --> on
samba_export_all_rw --> on
samba_portmapper --> off
samba_run_unconfined --> off
samba_share_fusefs --> off
samba_share_nfs --> off
sanlock_use_samba --> off
use_samba_home_dirs --> off
virt_use_samba --> off


Accessing this share from another Red Hat Box 6.4 (samba-client)
# smbclient -L 192.168.1.10 -U don [Works perfectly]

Now, when I try to mount the share as:

# mount.cifs //192.168.1.9/smbdemo /opt/test/ -o user=don
Password:
Retrying with upper case share name
mount error(6): No such device or address
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)

# smbclient //192.168.1.9/smbdemo -U don
Enter don's password:
Domain=[BARNES] OS=[Unix] Server=[Samba 3.6.23-14.el6_6]
tree connect failed: NT_STATUS_BAD_NETWORK_NAME

I searched in google but no avail.

Hello all,

I was screwin' around with Arch Linux. I'm interested in it but not more interested than my Kubuntu running KDStudio.

I didn't realize how much prep. their is and the fact that Arch does no prep. Anyway, I stopped trying to get it to run when I realized I had to pre-partition and set up a swap.

Now however grub does not boot into the KDE desktop. It boots into Kubuntu but with no desktop.

Does anyone know how to fix this, I would not like to have to re-install the whole system. I think there must be a fix, I'm not sure exactly what Arch did, gparted doesn't show anything.