Failed To Enumerate Standard 0 ZoneMinder

I am using Fedora 22 (64 bit), My lap is ProBook 4540s

I am trying to configure ZoneMinder but failed to get my webcam woring

When I try below command, I am getting an error

zmu -d /dev/video0 -q -v

Error, failed to enumerate standard 0: Inappropriate ioctl for device

Any idea how to go about this issue

Thanks and Regards


Similar Content



Super Newb Needs A Hand To Hold For This Entire Process

So I'm brand spanking new at this. I'm trying to teach myself about Linux and RPM-based distributions specifically because it's a requirement for a job that I really, really want (very tired of being a barista). Beyond that as someone who primarily uses my computer for gaming, I'm quite satisfied with using Windows 7.

I'm currently attempting, and so far failing, to install OpenMandriva on a completely blank 1TB external HDD. I've finally gotten the install to boot from the DVD disk properly, but now I'm running into this error:

"Partitioning failed: FAT resizing failed: ntfs resize failed: ntfsresize v2014.2.15 (libntfs-3g)
Error: device '/dec/sdd1' is mounted. You must 'unmount' it first."

What I've tried so far is this what this site has provided: http://windows.microsoft.com/en-us/w...#1TC=windows-7

Unfortunately, the same error pops up regardless. What am I missing? Also, pretend that you're trying to explain this to your grandpa. I probably won't understand what you're trying to tell me otherwise. Please help! I'm near the end of my rope over here.

FileZilla Connection Issues

Hello,

I am having issues connecting to my linux box (opensuse 11.3) from my Window 7 sytem. I am using FileZilla. When I attempt to connect I get this error message

Status: Connecting to 192.168.198.205...
Response: fzSftp started
Command: open "Mike@192.168.198.205" 22
Command: Trust new Hostkey: Once
Command: Pass: *********
Error: Authentication failed.
Error: Critical error
Error: Could not connect to server

I am thinking it is a setup on issue on my Linux box but not sure what to change at this point. I must have some settings correct, because I am able to remote into my Linux box using FreeNX. Any help would be appreciated

Installation Of Pmip6-for-ns-2.29-nist.patch

Hello,
I'm new user of ns-2.I've installed the ns-2.29 and nist-ns-2.29.mob
when i tried to install the patch pmip6-for-ns-2.29-nist.patch.
I had this errors
patching file p1
Hunk #1 FAILED at 124.
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 304.
Hunk #2 FAILED at 444.
Hunk #3 FAILED at 514.
Hunk #4 FAILED at 639.
Hunk #5 FAILED at 2746.
Hunk #6 FAILED at 3251.
Hunk #7 FAILED at 3284.
Hunk #8 FAILED at 3848.
8 out of 8 hunks FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 922.
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
The next patch would create the file p1,
which already exists! Assume -R? [n] y
patching file p1
Hunk #1 FAILED at 1.
File p1 is not empty after patch, as expected
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
The next patch would create the file p1,
which already exists! Assume -R? [n] y
patching file p1
Hunk #1 FAILED at 1.
File p1 is not empty after patch, as expected
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
The next patch would create the file p1,
which already exists! Assume -R? [n] y
patching file p1
Hunk #1 FAILED at 1.
File p1 is not empty after patch, as expected
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 77.
Hunk #2 FAILED at 365.
Hunk #3 FAILED at 542.
3 out of 3 hunks FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 228.
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 177.
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 201.
Hunk #2 FAILED at 324.
2 out of 2 hunks FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 38.
Hunk #2 FAILED at 52.
Hunk #3 FAILED at 86.
Hunk #4 FAILED at 852.
Hunk #5 FAILED at 968.
5 out of 5 hunks FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 316.
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
Could anyone help me???

Is It Time For A Modem Funeral?

I have a USB fax modem, and it logs the following errors when turned on.

I know it is impossible to know for sure, but think it is hardware related? Any chance to salvage?

Also, what are the steps to start troubleshooting?

Thanks

Code:
Jan 17 14:38:26 devserver kernel: generic-usb 0003:0461:4D0F.0066: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1a.0-1.2/input0
Jan 17 14:38:41 devserver kernel: usb 3-1: new full speed USB device number 24 using xhci_hcd
Jan 17 14:38:41 devserver kernel: usb 3-1: device descriptor read/all, error -71
Jan 17 14:38:41 devserver kernel: usb 3-1: new full speed USB device number 25 using xhci_hcd
Jan 17 14:38:41 devserver kernel: usb 3-1: device descriptor read/all, error -71
Jan 17 14:38:41 devserver kernel: usb 3-1: new full speed USB device number 26 using xhci_hcd
Jan 17 14:38:41 devserver kernel: usb 3-1: device descriptor read/8, error -71
Jan 17 14:38:41 devserver kernel: usb 3-1: device descriptor read/8, error -71
Jan 17 14:38:41 devserver kernel: usb 3-1: new full speed USB device number 27 using xhci_hcd
Jan 17 14:38:41 devserver kernel: usb 3-1: device descriptor read/8, error -71
Jan 17 14:38:42 devserver kernel: usb 3-1: device descriptor read/8, error -71
Jan 17 14:38:42 devserver kernel: hub 3-0:1.0: unable to enumerate USB device on port 1

Failed To Load Session Cinnamon (Linux Mint)

Hello everyone,

I just tried upgrading to Linux Mint 17 from version 16, and I obviously did something wrong since when I'm prompted for my password, I get an error message saying "failed to load session cinnamon."

Then there are some error logs which say failed to connect to virtual box kernel service for several lines, then below that "unable to find cinnamon-fullback-mount-helper."

I tried doing ctrl alt f2, but I get a whole bunch of gobbledy gook which I'm unable to copy and paste.

I also tried burning a new DVD-R with Mint 17, but my computer doesn't even read it when I power it on. Otherwise, I would have tried reinstalling the OS.

So any suggestions you have will be greatly appreciated.

Thanks.

Need Help, Compiling Hydra On Cygwin Make Error, Installed Packages But Still Get Err

Hi im extremely new to theese things and spent all night trying to do this since, my dad wont let me login to the router so i can forward my ps4 ports, since i expereience extreme delay in gameplay about 1/4 of a second, so im trying to use hydra on cygwin so far i gotten to make step, but i keep getting this error code,

gcc -I. -Wall -O2 -o pw-inspector pw-inspector-logo.o pw-inspector.c
gcc: error: pw-inspector-logo.o: No such file or directory
Makefile:61: recipe for target 'pw-inspector' failed
make: [pw-inspector] Error 1 (ignored)
gcc -I. -Wall -O2 -c hydra-vnc.c -DHAVE_MATH_H
gcc: error: spawn: No such file or directory
Makefile:64: recipe for target 'hydra-vnc.o' failed
make: *** [hydra-vnc.o] Error 1

now do i need to download any packages? or another command please help me out im so close but im only learnt this over night! it would be extremely gratefull

Packstrap /mnt Base Command Error When Using Arch.

I'm at the "install the base packages" of this guide. When I type in the # pacstrap /mnt base command I receive this error:

Code:
error: config parsing exceeded max recursion depth of 10.
==> ERROR: Failed to install packages to new root.

Any ideas what it is?

Apache2 Won't Start

When I type

service apache2 start

I get a message saying:

[....] Starting web server: apache2apache2: Syntax error on line 7 of /etc/apache2/apache2.conf: Could not open configuration file /etc/init.d/apache.conf: No such file or directory
Action 'start' failed.
The Apache error log may have more information.
failed!

The apache error log is blank and doesn't have any information.
Please help me.

Kali Thumbdrive Boot Error "Failed To Load COM32 Filename Vesamenu.c32

Using a Kingston 4GB datatraveler for drive creation
Created using amd64 1.1.0a of the Kali ISO verified from Kali.org
Drive created using Ubuntu 14.04 on a Dell Latitude E5500

dd seems to create the drive with no errors. The drive boots to the error. Hard reboot into Ubuntu to search for solution has led me to a long series of issues that I have been trying to correct.

A possible fix for the failed to load error is to copy the file to the root of the USB drive (/dev/sdb1). Drive is created with a hidden HPFS/ NTFS fs. 0x17. Changed FS to HPFS/NTS (0x07). Drive now mounts, but when attempting to copy onto drive, I get an error that the file system is read only.

I try to correct the issue using nautilus and the properties menu. It does not allow me to change the view only to read/write even though it shows me as the owner.

I think maybe a command line thing would work, or who knows what else. Maybe an fstab entry? I am continuing to search the web, and hope to work this out.

Any help would be appreciated.

Package Operation Failed

Ubuntu 14.10 runs great on my laptop but I think I have dependency problems because EVERY time I install or remove software I get the following error message. However everything seems to run just fine...

"Package operation failed"
"The installation or removal of a software package failed."

...and details shows a massive list of gobbledygook with a lot of:

"insserv: Starting vpnagentd_init depends on rc.local and therefore on system facility `$all' which can not be true!"

I can post the whole message but I'll wait for feedback first.