Linux Mint 17 Cinnamon Not Detecting Windows 7 During Boot Up

Hi,

Before installing Linux Mint 17 to the entire HDD of my HP p2 1317cb desktop, it was running a preinstalled windows 8 OEM UEFI. After several failed attempts of dual booting(no grub menu and boots directly to the windows 8) i then decided to do a erase all and install Linux option. Now i have Linux Mint 17.1 working flawlessly, so far. What i want to now do is, dual boot a windows 7 installation alongside my Linux. Please advise on the best way to do this.
Thank You.

Note: Before doing a clean install of Linux i disabled secure boot,enabled legacy, and disabled fast boot.

I just got a new laptop with Windows 8.1 and I cannot figure out how to install Linux Mint by booting from a CD or USB drive. Previously, I had installed Linux Mint on my old desktop and netbook computers that were running Windows XP. I had no trouble booting from a CD. Now that the process has been complicated in Windows 8.1 I don't know what to do. Any help would be greatly appreciated, I would really like to get rid of Windows 8.1 ASAP. Thanks!

Hello All. This is my first post here. I am worse than a newbie; I'm a PC dinosaur! Not joking either.
Recently got a Dell Inspiron 3048 with Windows 8.1 pre installed. As I am a die hard XP user (my other PC is a Dell Dimension 2400), and seeing that PC's days may be numbered, I want to start using Linux, and decided Mint 17.1 would be first on the list.
Ordered a Linux Mint 17.1 boot disk and went to install it. At the option for a dual boot with Windows, I got lost, and did not understand the "other" choice versus making Linux the only OS on the PC. I wound up wiping my HDD and lost contact with Windows 8.1. Fortunately, the Dell Tech I got at Dell Support was able to walk me through getting Windows back up, but the only way I can now access Mint 17.1 is with the boot disk, but there is no set up options as it is already set up, even though incorrectly for a dual boot.
How do I wipe out Linux without losing Windows 8.1 as well so I can re install Linux and this time make the correct selection for a dual boot?
Anyone willing to respond please do so small and slow so I can follow.
TIA.
BTW, I have tried installing Zorin OS 9 Ultimate on my XP machine via DVD and USB, but I can't get past the f1/f2 loop, even though I have reconfigured my boot sequence according to the drive I'm installing from. Zorin support has been MIA on this. Anyone having a similar problem?
Cheers

I am trying to boot Linux Mint from an 8gb Sandisk USB. I changed my boot settings and it boots into what I believe is called grub? I am given two options, Boot Linux Mint, Boot Linux Mint (compatibility mode). When I select either of them all I get is a black screen. I've tried many things to get around this, messing with my graphics card settings (within grub), different USB's (another 8gb and a 32gb), I tried Ubuntu and that just doesn't boot at all I go straight back to my UEFI settings. I'm very new to Linux and I don't just want to hop in, I just want to boot from my USB whenever I want to play around with it. Thank You

Note: I'm running windows 8.1 currently on a ASUS N550JV laptop. I've been using the UUI from Pen Drive Linux.

Hi, So im quite new to linux and im not surprised as iv tried before to check it out and failed then (old computers problem) but i decided to have another go on a new comp recently.

UEFI mobo
Nvidia geforce 770 as output.

I need a duel boot of win7 & mint. Win7 is installed.

UEFI has caused me so many problems its just beyond me ! (i had never heard of it before i brought this comp)

booting Mint from a cd/dvd works fine.

booting from a USB fails with a blank or locked up screen at the first mint logo. (many tests with dif methods of creating live USB)

Installing mint with grub over the top of win boot loader fails , i get no options to choose between win & linux it boots straight to linux and then fails (same error as above)

I have a small SSD with win7 , there is not a lot of space on it so i want to install mint 17.1KDE on a different HDD.

After a month or so of reading testing reading testing etc i ended up getting mint installed on partitions i created on secondary HDD but i had to keep the windows boot loader in place and use easyBCD.

However now i get the choice of win7 or linux and windows still actually works (breakthrough ^^) BUT linux just crashes at boot (at the first logo) and then the monitor looses all signal?


I am soo frustrated. Mint will run of a CD but i can not get it to work in any other way , please help

Thx.

I recently purchased a laptop that came with Windows 8.1 as the OS. I am trying to switch it over to Linux Mint 17.1 (Rebecca). I found an Ubuntu disk loader that I placed on a DVD and it boots just fine. Downloaded the 32-bit Linux Mint .I so and burned it to a DVD. Tried to boot from it and nothing. Being new, the problem pretty much has to be something insanely simple but I sure can't find it. Would really appreciate any expertise out there.

I am installing Linuc Mint Rebecca on this computer: CPU: I7, motherboard: ASUS X99-A, HD: 2x 2TB, motherboard BIOS RAID1, so the total hard drive size is 2TB

While I was installing LINUX MINT on RAID1 hard drive, the installation system pop up ??? ???windows at Wher Are You step, after I click OK, jump to Installation Type, no matter which type I select: Erase disk and install Linux Mint or Someting else, ??? error message pop up at Where are you.

And if I click either of the two disk, it shows "Unable to mount location"

however, I can double click and see the content of RAID1 2TB disk.

Question: what's the problem of LINUX MINT installation on RAID1?

hi All,

i tried to make a bootable linux mint usb. i thought i succeeded but when i pull out the usb and try to boot back into windows i still boot into linux mint. this is probably a stupid question but have installed linux mint over my windows mistakenly.

help....please

I am using linux mint and the grub menu gets configured automatically using scripts in /etc/grub.d. The menuentry that gets created is something like Code:

"linux mint (on /dev/sda1)"

. I use external drives sometimes and also have linux on my harddrive which I also switch between computers. It gets confusing when it says /dev/sda2 when it means something else. It boots fine because that actual boot command uses uuid. How can I change the text of the (script generated) description to also use partition labels or uuid (or the first few chars) just so I know which install will actually boot. like this: Code:

"Linux Mint (OFFICESSD)"
"Linux Mint (HOMEHDD)"
"Ubuntu (SANDISK)"
"Ubuntu (IMATION)"

I realise (maybe its the best way) I can change the "GRUB_TITLE=Linux Mint 17 Cinnamon 64-bit" in /etc/linuxmint/info but would rather a smoother way.

Hi friends. I have to say right off the bat, this is basically my first time trying to install Linux by myself. After reading this forum and others, and tech sites, I decided Linux Mint looked the most to what I am used to, which is Windows 7.


Here is my CPU-ID Info - http://valid.x86.fr/5ya0sx


I downloaded Linux Mint 17.1 Cinnamon 64bit (The one found on this link, http://www.linuxmint.com/edition.php?id=172).
I burned the img to a DVD with Nero Burning ROM. I wanted to boot from the disc, and the Linux started to show it's logo, and I waited for a few minutes, and I finally thought something was going to happened, but this showed up, (Screenshot) http://i.imgur.com/oELzKCg.jpg.
So basically I shut down my computer and here I am. I have eno experience as to what I am supposed to do when I get that message. Frankly I did not see this type of message when looking through step by step instructions about how to install Mint allongside W7.
Can someone please tell me, for the love of Star Trek Voyager and all that is Holy, how do I install Linux Mint 17.1 Cinnamon as a dual boot on a Windows7 system.

Thank You