Mounting Of Drives In Ubuntu. Please Help. Win 8.1 And Ubuntu 14.04 Dual Boot

I have a Toshiba Laptop that had a Dual Boot of Windows 7 and Linux Mint 17 on it and both OS's worked fine. I've been wanting to use CentOS 7 as my primary OS so that I can become more familar with RPM management and proceeded to remove my Mint installation and replace it with the CENTOS 7 installation, and the install completed successfully. HOWEVER, here's my problem.....

When my laptop starts up, I don't see GRUB nor do I have any option of selecting whether to run Windows or CentOS. It automatically loads up Centos 7. When I do a 'sudo fdisk -l', I can see that SDA1 is an NTFS drive, and when I try the following 'sudo mount /dev/sda1 /media/Main\ Drive' I get an error message saying that I can't mount an NTFS drive.

Am I missing something or is there a way to access my Windows files from within Centos. I was able to do this with Mint without an issue, but unable to see any of my windows drives because I can't mount an NTFS drive.

I have no problem with keeping CENTOS as my only OS on this laptop, however, I do need to access the files from the Window's partition, and if anyone can help me to access my files, that would be totally awesome.

Thank you in advance for reading through this and for any help offered.....

Mikey

I have a dual boot laptop with debian stable & Windows 7.

The HD partitions a
sda1: NTFS for W7
sda2: FAT32 (currently unused)
sda3: linux /boot
sda4: linux ext4, which is LVM with encryption

I've re-installed W7 and now need to recover the MBR & grub menu.

I've booted with the netinst usb in rescue mode, but it fails to mount the root partition /sda4:
"An error occured while mounting the device you entered for your root file system (/dev/sda4) on /target"

and /var/syslog shows:
Code:

rescue-mode: selected root device '/dev/sda4'
umount: cant umount /target: Invalid argument
isofs_fill_super: bread failed, dev=sda4, iso_blknum=16, block=32
EXT2-fs (sda4): error: unable to readsuperblock
EXT3-fs (sda4): error: unable to readsuperblock
rescue: mount: mounting /dev/sda4 on /target failed: Invalid argument

So it seems like something is wrong with the mount command?

Would appreciate suggestions how to solve this.

Thanks

Dear All,

I am using OLE 6.2, 32 bit. Today I was trying to open the other drives (windows C drive and external drive both are ntfs), when I tried to open it, I go the following error

Error mounting: mount: unknown filesystem type 'ntfs'

Please advise how can I fix it, I did a google search but since I am new I am unable to understand what I should really do. Sept by Sept advise would be of great help.

Thanks in advance.

Regards

Suresh Panchanathan

Hi,

Could anyone please explain as understandable as possible how could I on my Windows 8 open either single file or install (and use) entire software which is supposted to work on Linux and/or Ubuntu? I have absolutelly NO experience with Linux and have never used it. Honestly, I don't know if there is any difference between Linux and Ubuntu. I want to be inside my Windows 8 while using Linux files/sofware. The only solution I could think of are actually two but neither of them is useful for me:

1. Vmware (i don't know how to use it)
2. Rent remote computer (vps/rdp) with linux OS installed (this would let me be in Windows 8 while being able to use Linux file/software [on remote computer] but sooner or later I would want to have Windows installed there too)

Tried program Linux Reader but didn't work on my Windows 8. Although I would need solution for installation/usage of software (that can be used only on linux/ubuntu), regardless of details***, the current problem is basically related to single files only: I have two files, both in IMG extension. Don't know how to open them because Deamon Tools doesn't handle IMG. The problem is that filesystem in one of them is "Linux" and filesystem in another is "142". The error I am getting when I try to open them is:

"File with harddrive/disc snapshot is corrupted."

But this is most likely because they are supposted to be used in linux environment, hence such question.

*** when i said "details" I was referring to basically anything: type of software, size, purpose, whether or not it needs network connection, whether or not it contains logging in (username password, etc) requirement, etc.

The following solution for current situation (quoted error above) works only partially:

http://www.sysprobs.com/simple-tip-h...thout-software

I am able to open/run/mount IMG if I do what is described on this link (im basically opening iso in this case - see the website) but when opening the virtual drive, the following error message proves that the file can be used in linux/ubuntu only:

"Windows cannot access that drive. Drive could be corrupted. Make sure the drive is in condition that can be recognized by Windows. If drive isn't formatted then format it before usage."

Would need detailed instructions, for total beginner, who has never used linux/ubuntu, what to do in such case: how to use in win8 files/software that are supposted to be used in linux/ubuntu. Also answer on how to open IMG would be highly appreciated.

Kindest regards and thank you a million in advance.

Hi, all, I am new to the forum and quite new to Linux, I am running Mint and Kali from a USB drive, all is going well with with the software and I am starting to find my way around it.

So, now to my question, I have 15 machines which all run from a CF card and the card has multiple partitions and is a Windows Embedded XP, not that the operating system makes any difference, I need to upgrade all the CF cards from 2gb to 4gb, so unfortunately Windows isn't an option to use to copy the drives as it doesn't recognise multiple partitions on a removable drive, so I cant just remove the drive, clone it and fit the new one.

What I need is a method of cloning the drive completely with both partitions, I have read about dd but cant seem to see anything about doing this with multiple partitions, as Linux sees it as two drives when I plug it in, how can I use dd or anything else to clone the drive which is bootable and has two partitions?

At some point I would like to automate the process as I could have many of these machines/drives to upgrade, is there a way to write a program that will automatically back up the drives from a USB drive and then reinstall it, I have seen this done before but I am not sure if this method did the whole drive, just the main drive or all partitions?

I have loaded Ubuntu onto my laptop as dual boot and have setup the displays. I have used it to search the web and copy some files from the Windows partition and everything worked fine. I did not shut down over night and this morning, there is nothing on either screen except my wallpaper and mouse cursor: no lonch pad, no title bar, nothing. I rebooted with the same USB drive into "Try Ubuntu without loading" and everything worked just fine. Then shut down; removed the USB drive; and rebooted using the installed dual boot. Nothing except wallpaper and mouse. This happened once before and I reinstalled.

What am I not doing?

Hello everyone,

I recently had an issue where I lost my whole backup server due to an electrical overload causing my server to literally explode and fried all 4 of my terabyte drives.... needless to say, I have no more backups because of this, and everywhere I read about backups said that setting up a raid array would allow me to keep good backups.... boy did I learn this lesson the hard way in needing to have some sort of external backup option, which brings me to this post and my questions:

I'm using Ubuntu 14.04 LTS server on an older Dell Poweredge 600sc, and I was thinking of using WD Passport 1Tb external drives to be used as my "offsite" backup option. I don't have a lot of data, and my current backup schedule is only a weekly backup, so thinking that if I have two of these passport drives so that I can have one drive offsite and one attached to the server, and rotate them every 4 weeks so as not to loose all my data.

Here's my question: Ideally, I would love to just be able to unplug the current drive, plug in the new drive and have everything work. However, I don't see this actually working, but if there's a way to do this, that would be totally awesome.... ;-)

So, realistically, I know I will have to unmount the one drive, unplug it, then plug in the new drive and mount it on the system. Is there a way to mount this to the same mount point automatically so that I don't have to rewrite my backup script each time I swap drives out so that the backups go to the same mount point? Or will the UUID's get messed up each time I do this?

Hopefully this makes sense and an easy solution can be found to accomodate this idea.....

Thanks again for all your help. This site is awesome for newbies such as myself........

Mikey

Hello Everyone
I have installed Ubuntu Server on a 500 GB drive formatted as EXT4.

Of of my Media, movies, music and pictures are from Windows PC's formatted in NTFS.
As all of the computers connecting to the server will be windows based will NTFS be fine or will I have to reformat them to work. The two media drives are 2 x 2GB Sata drives.
Could you tell me if this setup would work or will I have to reformat and and transfer the files to a new filesystem.
Also as a file server whats the best linux file system to use so it will work with windows PC's in a lan flawlessly.
Thanks for you expertise.
Regards

I have windows 7 laptop, Dell. I downloaded the newest edition of Ubuntu (Twice)to see if it would install and dual boot beside Windows 7. Unsucessful on several attempts. Once I reboot the computer it will give ma a choice of 7 or Ubuntu. I decide on Ubuntu it starts to boot into Ubuntu than a black screen with all types of Kernel error codes that i'm unfamilur with. one is---(1.292618) kernel panic-not syncing: no working init found.

Try passing init option to Kernel (see Linux Documentation/init.txt for guidance..

I am not sure what all this means any help would be appreactiated...

Currently I'm using Windows 7 OS, in the same hardware I have RedHat ISO Image, is there any possibility to boot Linux ISO image directly from the same hardware?(not by using live CD,USB or any VM Workstation). I have 4 drives in my windows OS, I have ISO image in D: drive and E:drive I allocated for Linux, please try to help me out any one .....

Awaiting for your valuable Support........