Equivalent In Linux For The Dos Command Dir *.exe /s

Hello all,

As title says.... whats the best way of getting linux to do another command after the first one?

e.g. Say I type "find . -iname "*.dll" this displays a list of all the dlls in a folder/subdirectory. ... then i wanted to copy these files, or du them, or other commands.

The three things i am aware of is:

Pipe |
awk
xargs

Which one is the most useful/standard/best practice to use?

Thanks

Do it like this is your situation, your server, and the dir that are mentioned below, act like they are yours! im just looking for an accurate answer!
(student of O'Rielly School of Tech)


whenever you log in, your shell executes commands that it finds in your dotfiles, specifically .bash_login. In your .bash_login, add a series of commands that will first create a directory named ~/sysadmin1/my_peeps/$DATE, where $DATE is today's date in the format mmddyy. This command should succeed whether or not the directory ~/sysadmin1/my_peeps already exists. Then, it will redirect the output of the w command (which lists the currently logged in users on the system) to a file inside this newly created directory called users.$TIME, where $TIME is the current time in the format hhmmss (use 24 hour time).

In order to do this, you must use a new concept: assignment of a variable from the output of a command. For example, in order to set the variable EXAMPLEDATE using the unformatted output of the date command, you would do the following:

EXAMPLEDATE=`date`

The characters surrounding the date command are called "backticks." They are usually located on the same key as ~. They are not single quotation marks. This is actually another kind of expansion called "Command Substitution" (you can learn more in bash's manpage).

For this project, you can use the date command to get both the date and the current time, however, you will have to consult date's manpage to find out how to change the formatting.

Hi All,

Im trying to create a script which checks the creation time of a file and if it is more than ten minutes, send out an alert.

For ex : Creation date of file is 10:30 AM
current time is 10:45 AM

Then send an alert/ message.

This is the script i wrote below :

Code:

#!/bin/ksh

filename="/apps/log/file.txt"

if [ -f "${filename}" ]
then
        createTime=`ls -lad "${filename}" | awk '{print $8}'`
        echo "$createTime"
        currentTime=`date '+%M'`
        echo "$currentTime"
        DIFF=$(( $currentTime - $createTime )) 
        echo "$DIFF"

else

        exit 1

fi

I am getting syntax error on the subraction when i try to run this script . I can understand that creation time and current time is in different format thats y this error throws, but i dont know how to rectify it .

I need to find out if the file creation time is more than ten minutes.

Please help me in achieving this output.

Hi All,

I have two scripts, the aim of these two scripts is, to check whether a particular script is running or not, if it wont runs, then throw a mail.

How i Achieved this output is, I wrote first script.

I created an infinite while loop which performs below steps

1. It creates a touch file
2. Triggers the script which needs to be monitored if its working or not.
3. Removes the touch file.

If the second step fails, then the remove file command will not happen and the script will stuck there itself.

I created an another script which checks the creation time of the touch file and if it is more than ten minutes, it means the second step in the first script is hanged, which also means that particular script is not working.

So if the creation time is more than 2 minutes the second script will throw a mail.

Below are the two scripts.

Code:

#!/bin/ksh



userid="chansd"

filename="/apps/log/check.txt"

while true ;do
touch $filename
pass=`/apps/eDMZ/call_st.ksh $userid`
sleep 20
rm $filename
done

Below script checks the file creation time and throws email if it is older than 2 minutes
Code:

#!/bin/ksh


filename="/apps/log/check.txt"

if [ -f "${filename}" ]
then
if test "`find $filename -mmin +2`"
then
echo "script is not working ! Please act on it" | mail -s "Script  is not working" Example@mail.com
fi


else

        exit 1

fi

What im going to do is

1. I am going to run the first script in background so it runs forever.
2. I am going to run the second script in cron forevry 5 mins to check the file creation time.

3. So if the first script hangs . I will kill the process using process id and after the issue resolves with the inner script, I will run the main script again.

I am new to Linux, Please let me know if this approach will work as expected.

Hello there. Im stuck on a task.

it`s the task:
Search the file 'data' for all of the lines that contain the pattern 'linux'
and put those lines in the file 'matches'.

You entered: grep "linux" date > matches
Please try again.

I tried lots of variants
1) grep linux date > matches
2) grep 'linux' date > matches
3) grep linux date >> matches

May be something`s wrong with grep command?
I just dont get it >.>; it should work fine. Where is my mistake folks?

Dear forum of Linux,
could I output a list of five books with their filename titles into one file?
In order o output all the contents of all the files with their filenames there was: find . -type f | while read x; echo -e "\n$x";cat "$x";done > бетховен.txt

In spite of them being successively named 1Atitle... 2Atitle the two first aren't 1A 2A, but 1A ..5A (2
3 4) They actually a 1АБетховен.. 5АБетховен... It now breaks all things I hoped.

Could the task be done by head, cat or grep command? Cat has no filename parameter, head can't output the whole file and grep has a filename parameter but it's primary use is searching one line. In find I coulnd't write each file by hand ...

i've got another command awk '{ print FILENAME, $0 }' (it claims to show the filename though it shows it didn't end


Currently I blame the Linux learning curve because of google results and non-answered messages and all that after translation if a nice question directly to English. Isn't that it hard to make more help to design unixes language in that way to be really descriptive and write it as you think.
I'm deeply sorry for that grief!...(

Hi All,

Not able to find TREE command in EL6, its working fine in EL5. Need help on this.

Below are the details.



[root@localhost ~]# mkdir -p /college/sports/performer/cricket

[root@localhost ~]# tree /college/
-bash: tree: command not found

[root@localhost ~]# tree college/
-bash: tree: command not found

[root@localhost ~]# which tree
/usr/bin/which: no tree in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin: /usr/bin:/root/bin)

[root@localhost ~]# uname -a
Linux localhost.localdomain 2.6.32-71.el6.x86_64 #1 SMP Wed Sep 1 01:33:01 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux

[root@localhost ~]# id
uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel) context=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023

to create a directory named sysadmin1/my_peeps/$DATE ,, am i to: echo sysadmin1/my_peeps/$DATE >> .bash_login ?? or do i: vi .bash_login and manually type the commands in there??,, i have the DATE variable already set. im looking for another way besides using mkdir.. thats my first question..

my real problem and second question is, how do i redirect the output of the w command to a file in my_peeps.. so, after that dir is created, do i do w > sysadmin1/my_peeps ??

Hi,

I have been trying to get information on how to process the output of a tcl file (aodv and leach protocol using mannasim) which I got on my command line Iinterface. Actually, I don't even know the keywords to search as I am new to this and other minor attempts haven't yielded positive results., I know there is usually a trace file but I can't see any. All I see is on my command line.

I also observe that it took the space on the entire screen and I can't copy the output from the start ( I could only copy from node 19 out of 30 nodes) because of the huge number of output lines.

The last thing I havent been able to figure ou is whether temperature is equivalent to energy Iin mannasim as mannasim has only temperature and carbon dioxide?


Thanks

Hello--

I'm trying to locate a file or a command line in a file on my hard drive. I am running Ubuntu 12.05.4 linux. Is there a grep command that will search the whole tree from root down to all the sub-directories?

Thank You.