Bash Covertly Executing Command

Hi,

I have Redhat 5.3 running on my machine. But when I am login through putty it gives me below error.
Without running any grep command I get this error on login and the grep command doesn't work.

login as: root
root@IP's password:
Last login: Mon Feb 16 15:27:55 2015 from IP
-bash: /bin/egrep: cannot execute binary file
-bash: /bin/egrep: cannot execute binary file
-bash: /bin/egrep: cannot execute binary file
-bash: /bin/grep: cannot execute binary file
-bash: /bin/grep: cannot execute binary file
[root@bkpdrill ~]# grep MemTotal /proc/meminfo
-bash: /bin/grep: cannot execute binary file

Centos 6.5

I ran into an interesting problem (on reddit) that I figured I could solve, but I have not been able to. Its simple,.. I added 'exit 0' to /root/.bashrc, and now I am trying to log in via ssh.

Everytime I do, it immediately exits when it runs the .bash_profile, which sources .bashrc, (which is immediate upon 'logging in')

I've tried:

Code:

ssh root@192.168.1.50 -t vim
vim scp://192.168.1.50/.bashrc
vim scp://192.168.1.50/root/.bashrc
ssh root@192.168.1.50 bash --norc
ssh root@192.168.1.50 /bin/bash --norc --noprofile
ssh -T root@192.168.1.50 "mv /root/.bashrc /root/.bashRC"
scp .bashrc root@192.168.1.50:/root/
ssh root@192.168.1.50 /bin/bash --norc --noprofile -vvvvvvvvvv
ssh -vvvvvv root@192.168.1.50 /bin/bash --norc --noprofile
ssh -vvvvvv root@192.168.1.50 /bin/mv /root/.bashrc /root/.bashRC
ssh -t -t root@192.168.1.50 << EOF
mv /root/.bashrc /root/.bashRC
EOF
ssh -t -t root@192.168.1.50 --norc << EOF
echo HELLO > /root/.bashrc
EOF
ssh -tv root@192.168.1.50 rm .bashrc

So,.. I am unable to get back into the system (as root, no other users exist) after adding 'exit 0' to .bashrc

Anyone feel like explaining why all of these failed (aside from saying SSH interactive logins run the .bash_profile/.bashrc files) or, offering a suggestion that works? Seems like if you have the root password, you should be allowed to modify the login process... since... you know... you are root.

I have made a change to GRUB2 bootloader in etc/default/grub.
Now I need to run 'update grub' for the change to take effect.
However, the 'update grub' command on the terminal is giving this error message:
Code:

root@debian:/# update grub
bash: update: command not found

Can someone please explain why this command is no longer working?

I've had to make a change to grub because I tried to install a new distro which meant I had to alter grub.
The install wasn't successful so I deleted the grub file and then re-installed it.
The re-installed grub needs a change so I can get sound on my pc.
However, I can't add these changes because the 'update grub' command doesn't work.

I've checked the grub file with another debian distro and they are both the same.
So now I don't know if I need to check if a different grub file is the problem or anything else.
Can someone help?

Hi all,

When i try to transfer some doc from one server to another, i met this problem.

[root@esjirp62 ~]# scp .bashrc esjirp62new:~/p62
root@esjirp62new's password:
bash: scp: command not found
lost connection
[root@esjirp62 ~]# which scp
/usr/bin/scp

Just in a few minutes ago, i was using scp and now it is not working any more.

Why is this happening?

I'm new to linux but I use linux a little at school and by connecting through a shell at home. Anyways, I just installed linux a little while ago and I opened a shell and tried to compile some java code by going to the directory of the code and typing "javac someCode.java" like I do at school but it says the command is not found.

I previously had installed the java runtime environment and I just went to go and try to install the java development kit but it says it was already installed.

Is there some sort of path I need to set for the shell to look for the java compiler? Thanks in advance.

Edit:
I have added aliases to my .cshrc file at school and I just found a bashrc file and csh.cshrc file in the /etc folder. Sorry, I'm really new to all of this. Anyways, I'm geussing I have to edit the bash file? Can anyone point me to a good tutorial of scripting for these files???

I made the mistake of adding an xterm invocation to my ".bashrc" file. My intent was to simply execute an xterm upon initial login to the KDE environment on Debian Wheezy (though the distro probably would have made no difference). What happened is that with each invocation of "xterm", the new xterm would again invoke an "xterm" via the ".bashrc" file. Duh, infinite recursion of xterms upon login. Is there a simple way to invoke an xterm at login that doesn't itself lookup the ".bashrc" file? By the time someone answers this, I will probably find and answer somewhere in the bash/xterm man pages, but thought I'd throw it out there. Really felt stupid after having realized my mistake. Had to login to recovery command line mode and replace the ".bashrc" file with "/etc/skel/.bashrc". Cheerio

I am looking to display the w (who) command to show only the

User TTY IDLE


http://screencast.com/t/vXb74kguJ

13:15:38 up 8 days, 16:48, 47 users, load average: 1.47, 0.95, 0.51
USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT
rf3 pts/0 192.168.11.72 05:58 48.00s 6.60s 0.00s -bash
user21 pts/1 192.168.21.177 04:32 8:41m 0.05s 0.00s -bash
user7 pts/2 192.168.11.114 17Mar15 6days 1.07s 0.00s -bash
user7 pts/3 192.168.11.114 20Mar15 4:54m 9.75s 0.00s -bash
user6 pts/4 192.168.11.85 11:02 7.00s 55.58s 0.01s -bash
user14 pts/5 192.168.11.183 05:06 29:08 2.80s 0.01s -bash
user14 pts/6 192.168.11.155 05:30 13:28 2.75s 0.00s -bash
user23 pts/7 192.168.11.62 05:48 25:09 0.95s 0.00s -bash
rf5 pts/8 192.168.11.118 05:58 6:51 5.30s 0.01s -bash
user2 pts/9 192.168.11.140 08:34 1:19 44.74s 0.00s -bash
user14 pts/10 192.168.11.141 06:02 12:14 9.46s 0.00s -bash
rf12 pts/12 192.168.11.69 06:02 2:07 9.44s 0.00s -bash
root pts/13 localhost.locald 12:29 9:10 0.05s 0.05s -bash
rf6 pts/14 192.168.11.79 06:04 14.00s 9.05s 0.00s -bash
user14 pts/15 192.168.21.113 06:23 11:29 1.71s 0.00s -bash
user5 pts/16 192.168.11.126 06:24 6:56 4.59s 0.00s -bash
user5 pts/17 192.168.11.126 06:25 6:19 31.59s 0.01s -bash
user11 pts/18 192.168.11.125 06:26 28:10 2.90s 0.01s -bash
user12 pts/19 192.168.21.123 06:35 13:16 0.88s 0.00s -bash
rf7 pts/20 192.168.11.80 06:35 2:06 7.64s 0.00s -bash
user12 pts/21 192.168.21.123 06:36 41:55 0.12s 0.00s -bash



So far I have this

w | awk {'printf ("6s\ts\n", $1, $2, $3, $5)'} |more
13:20:16 up
USER TTY
rf3 pts/0
user21 pts/1
user7 pts/2
user7 pts/3
user6 pts/4
user14 pts/5
user14 pts/6
user23 pts/7
rf5 pts/8
user2 pts/9
user14 pts/10
rf12 pts/12
root pts/13
This only shows the 2 columns



w |awk '{print $1, $2, $3, $5}'

13:21:01 up 8 16:53,
USER TTY FROM IDLE
rf3 pts/0 192.168.11.72 20.00s
user21 pts/1 192.168.21.177 8:46m
user7 pts/2 192.168.11.114 6days
user7 pts/3 192.168.11.114 4:59m
user6 pts/4 192.168.11.85 3:42
user14 pts/5 192.168.11.183 34:31
user14 pts/6 192.168.11.155 18:51
user23 pts/7 192.168.11.62 30:32
rf5 pts/8 192.168.11.118 12:14
user2 pts/9 192.168.11.140 1.00s
user14 pts/10 192.168.11.141 17:37
rf12 pts/12 192.168.11.69 30.00s
This shows some what hard to read and the columns don't line up correctly


is there a way to tab them in to columns that line up properly, or even something similar to the TOP command where the list will keep refreshing?

Apologies. I've been out of Unix for 14 years, and the gears have rusted. Also, Unix has changed - enough similarities to memory that I'm pretty comfy though.

Glad to see lots of info available via google. However changes are going to take getting used to. Have set up a testbed of 3 nearly identical machines, hoping to make an (at home) private network where I can automate installs and set-ups using NIS and NFS (Similar to work I once did).

Have found useful scripts interspersed with comments, would like to copy and paste them to a bash script that:

Reads the line.
Echos the line.
Reads the reply.
Executes what is typed.

Essentially, by making myself type (or copy & paste) the commands I think I'll become familiar.

Figured I'd use a spreadsheet, select the file, and paste into column B of the spreadsheet. In column A I'd paste:

echo "

and in column C I'd paste:

"

Then I'd cut and paste into a text document, insert the lines:

read A
$A

behind every command necessary to the actual task.

Figured I'd have to escape the ' and ".

Ran a test (test.bash):

#!/bin/bash
for i in `seq 1 10`;
do
echo "Enter a command:"
read A
echo "Trying $A"
$A
done

works fine when I type

ls -alg

but not so when I type

ls -alg | grep dwrx

so I'm wondering if someone has a suggestion?

Thanks for any ideas.

I want to write a bash shell script to execute a command for one minute then stop that command (ctrl c) pause for 10 seconds then run another command for one minute then stop that command pause for 10 seconds then go back to the begining of the script and loop indefinetly.

First I want to run this command for one minute;

reaver -i mon0 -c 6 -b "mac address" -a -vv

stop previous command and pause for 10 seconds

Then run this command for one minute;

airodump-ng -i mon0

stop previous command and pause for 10 seconds

Then recall reaver command and continue to loop through until reaver spits out result.

I imagine I will need to create a function for each command, an if statement and an ifelse statement and I will need the break and sleep commands. but I am not sure about the syntax, PLEASE HELP THIS NOOB!

hi guys, im trying to understand the bash rules or hash tag rules.

my understanding is the the everything to the right of the bash command is not executed? is this right? and you disable it by using a new line to enter executable commands?