Problem In Running Codes Of TORA

Hi,
I am new in linux. I have following problem while running the codes of TORA in ns-2.35 in ubuntu.Can you please help me?


num_nodes is set 6
INITIALIZE THE LIST xListHead

(_o22 cmd line 1)
invoked from within
"_o22 cmd port-dmux _o37"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error "error when calling class $cls: $args" $..."
(procedure "_o22" line 2)
(SplitObject unknown line 2)
invoked from within
"$agent port-dmux $dmux_"
(procedure "_o19" line 11)
(Node/MobileNode add-target-rtagent line 11)
invoked from within
"$self add-target-rtagent $agent $port"
(procedure "_o19" line 28)
(Node/MobileNode add-target line 28)
invoked from within
"$self add-target $agent $port"
(procedure "_o19" line 15)
(Node attach line 15)
invoked from within
"$node attach $ragent [Node set rtagent_port_]"
(procedure "_o3" line 85)
(Simulator create-wireless-node line 85)
invoked from within
"_o3 create-wireless-node"
("eval" body line 1)
invoked from within
"eval $self create-wireless-node $args"
(procedure "_o3" line 23)
(Simulator node line 23)
invoked from within
"$ns node"
invoked from within
"set n(0) [$ns node]"
(file "tora2.tcl" line 115)


Similar Content



Ns2 Black Hole Attack Code Runing Problem

I installed ns2 using (sudo apt-get install ns2)
I hav code for black hole attack in aodv manet and while trying to run it on ns2 Im getting the fallowing error message
please tell me how to fix this..??

INITIALIZE THE LIST xListHead

(_o58 cmd line 1)
invoked from within
"_o58 cmd addr"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error "error when calling class $cls: $args" $..."
(procedure "_o58" line 2)
(SplitObject unknown line 2)
invoked from within
"_o58 addr"
("eval" body line 1)
invoked from within
"eval $node addr $args"
("default" arm line 2)
invoked from within
"switch -exact $routingAgent_ {
DSDV {
set ragent [$self create-dsdv-agent $node]
}
DSR {
$self at 0.0 "$node start-dsr"
}
AODV {
set ragent [$self cre..."
(procedure "_o3" line 14)
(Simulator create-wireless-node line 14)
invoked from within
"_o3 create-wireless-node"
("eval" body line 1)
invoked from within
"eval $self create-wireless-node $args"
(procedure "_o3" line 23)
(Simulator node line 23)
invoked from within
"$ns node"
invoked from within
"set node_(2) [$ns node]"
(file "atk3.tcl" line 55)

URGENT HELP!!! GPSR Patch With Ns-2.34 Ubuntu 12.04

Hey guys
I have been trying to patch GPSR with ns-2.34.The operating system i am using is ubuntu 12.04.
I have made all the necessary changes required in the various files .

I have another version of ns (ns-2.35 ) too but it is in a different directory.
Everytime I run my tcl file an error keeps coming up.
I will be greatful if somebody can help me.This is very very URGENT.


(_o29 cmd line 1)
invoked from within
"_o29 cmd if-queue _o23"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error "error when calling class $cls: $args" $..."
(procedure "_o29" line 2)
(SplitObject unknown line 2)
invoked from within
"$agent if-queue [$self set ifq_(0)] "
(procedure "_o17" line 28)
(Node/MobileNode add-target line 28)
invoked from within
"$self add-target $agent $port"
(procedure "_o17" line 15)
(Node attach line 15)
invoked from within
"$node attach $ragent [Node set rtagent_port_]"
(procedure "create-gpsr-routing-agent" line 29)
invoked from within
"create-gpsr-routing-agent $node $id"
(procedure "gpsr-create-mobile-node" line 41)
invoked from within
"gpsr-create-mobile-node $i"
("for" body line 2)
invoked from within
"for {set i 0} {$i < $opt(nn) } {incr i} {
gpsr-create-mobile-node $i
}"

How To Patch GPSR Routing Protocol To Ns-2.35

Hi,
I have patched GPSR to ns-2.35 using keliu' code. It works fine with given tcl file. I need to move nodes according to mine own mobility scenario and compare them to AODV protocol.
I have two problems
1. I don't understand what this command in gpsr.tcl file means Code:
proc gpsr-create-mobile-node { id args } {
         .........................	
if [info exists opt(energy)] {
	$node addenergymodel [new $opt(energy) $node 10 0.5 0.2]}
         .............

What are these figures (0.5, 0.2), are these energy consumed in reception and transmission or some thing else.

Secondly I want move mobile node created using proc defined in gpsr.tcl file according to my own mobility plan e.g. Code:
 $ns_ at 0.000000000000 "$node_(0) setdest 144.816950690450 20.073824649527 0.324133202939"
$ns_ at 0.000000000000 "$node_(1) setdest 93.957720171475 192.140808646867 1.452613500562"
$ns_ at 12.158688172971 "$node_(23) setdest 113.137798368154 39.443538618334 0.902003496971"
$ns_ at 14.805074599534 "$node_(2) setdest 152.227654369397 20.766089279052 1.742469780423"

But when I run simulation it gives error like this:[QUOTE]Load complete...
Starting Simulation...
ns: _o18 setdest 144.816950690450 20.073824649527 0.324133202939:
(_o18 cmd line 1)
invoked from within
"_o18 cmd setdest 144.816950690450 20.073824649527 0.324133202939"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error "error when calling class $cls: $args" $..."
(procedure "_o18" line 2)
(SplitObject unknown line 2)
invoked from within
"_o18 setdest 144.816950690450 20.073824649527 0.324133202939"
[\QUOTE]
Urgent help is needed please

Error In Running Leach_test In NS-2.34

Hi all,

I am trying to simulate leach on NS2 but I've had problems with running the leach_test. I've followed all steps from installing NS2 up to installing the LEACH patch (used the latest one from exidus). Here's the error message in the leach.err I found.

Code:
couldn't read file "/mit/uAMPS/uamps.tcl": no such file or directory
    while executing
"source.orig /mit/uAMPS/uamps.tcl"
    ("uplevel" body line 1)
    invoked from within
"uplevel source.orig[list $fileName]"
    invoked from within
"if [$instance_ is_http_url $fileName] {
set buffer [$instance_ read_url $fileName]
uplevel eval $buffer
} else {
uplevel source.orig[list $fileName]
..."
    (procedure "source" line 8)
    invoked from within
"source /mit/uAMPS/uamps.tcl"
    (file "tcl/mobility/leach.tcl" line 18)
    invoked from within
"source.orig tcl/mobility/leach.tcl"
    ("uplevel" body line 1)
    invoked from within
"uplevel source.orig[list $fileName]"
    invoked from within
"if [$instance_ is_http_url $fileName] {
set buffer [$instance_ read_url $fileName]
uplevel eval $buffer
} else {
uplevel source.orig[list $fileName]
..."
    (procedure "source" line 8)
    invoked from within
"source tcl/mobility/$opt(rp).tcl"
    (file "tcl/ex/wireless.tcl" line 187)

Your help are very much appreciated, thanks!

Error In Umts Verical Handover Wih Wlan

Hey,
please find attached the code
I got this error :
can't read "mac_(0)": no such variable
while executing
"subst $[subst $var]"
(procedure "_o112" line 5)
(SplitObject set line 5)
invoked from within
"$iface2 set mac_(0)"
invoked from within
"set tmp2 [$iface2 set mac_(0)] "
(file "umts.tcl" line 319)




can anyone help to solve the error??

I Get An Error While Executing Leach.tcl

couldn't read file "mit/uAMPS/ns-leach.tcl": no such file or directory
while executing
"source.orig mit/uAMPS/ns-leach.tcl"
("uplevel" body line 1)
invoked from within
"uplevel source.orig[list $fileName]"
invoked from within
"if [$instance_ is_http_url $fileName] {
set buffer [$instance_ read_url $fileName]
uplevel eval $buffer
} else {
uplevel source.orig[list $fileName]
..."
(procedure "source" line 8)
invoked from within
"source mit/uAMPS/ns-leach.tcl"
(file "leach.tcl" line 7)

Ns2 Project

hie

am using ns2.34
i have tried to run: make clean
:make

i got this results

for i in indep-utils/cmu-scen-gen/setdest indep-utils/webtrace-conv/dec indep-utils/webtrace-conv/epa indep-utils/webtrace-conv/nlanr indep-utils/webtrace-conv/ucb; do ( cd $i; make all; ) done
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/cmu-scen-gen/setdest'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/cmu-scen-gen/setdest'
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/dec'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/dec'
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/epa'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/epa'
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/nlanr'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/nlanr'
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/ucb'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/ucb'


running a tcl file with black hole attack i get the following error, but am not sure whats the problem excatly

num_nodes is set 33
INITIALIZE THE LIST xListHead
ns: _o171 blackhole:
(_o171 cmd line 1)
invoked from within
"_o171 cmd blackhole"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error "error when calling class $cls: $args" $..."
(procedure "_o171" line 2)
(SplitObject unknown line 2)
invoked from within
"_o171 blackhole"


give me some reference or some sites where to video tutorials, or pdf tutorials which can help me to solve this problems

i will be very grateful for response

Error:: "wrong # Args: Should Be "set VarName ?newValue?" " While Running TCL Script

I m learning Tcl and write short code. After running code i got same error repeatedly and not able to find mistake,,,i wrote it as it is from a tutorial. here is the code below

set ns [new Simulator]

set f1 [open out.nam w] #open nam file out.nam
$ns namtrace-all $f1

proc finish{} {
global ns f1
$ns flush-trace
#close $tracefile1
close $f1
exec nam out.nam &
exit 0
}


set n1 [$ns node] # 3 nodes defined
set n2 [$ns node]
set n3 [$ns node]

set duplex-link $n1 $n2 10mb 10ms Droptail
set duplex-link $n2 $n3 10mb 10ms DropTail
set duplex-link $n3 $n1 10mb 10ms DropTail

set udp1 [new Agent/UDP] #UDP agent attached to node n1
$ns attach-agent $n1 $udp1

set cbr1 [new Application/traffic/CBR]
$cbr1 set packetSize_ 500
$cbr1 set interval_ 0.005
$ns attach-agent cbr1 udp1

set null1 [new Aggent/Null]
$ns attach-agent $n2 $null1


$ns connect $udp1 $null1

$ns at 0.5 "$cbr0 start"
$ns at 4.5 "$cbr0 stop"


$ns at 12.0 "finish"

$ns run



ERROR:wrong # args: should be "set varName ?newValue?"
while executing
"set f1 [open out.nam w] #open nam file out.nam"
(file "11.tcl" line 19)

I Am Trying To Run CRCN Protocol In Ns2.31 But Every Time I Am Getting This Error,

Hello guys. When ever i tried to run CRCN protocol i am getting following error:
harsh@ubuntu:~/ns3/test$ ns test1.tcl
num_nodes is set 10
missing operator at _@_
in expression "$i < $val(ni) _@_$val(channum) "
(parsing expression "$i < $val(ni) $val(cha...")
invoked from within
"for {set i 0} {$i < $val(ni) $val(channum) } {incr i} {
$ns_ add-channel $i $chan_($i)
}"
(file "test1.tcl" line 48)

Can someone guide me how to correct this error??

Thank you

Grayhole Attack In Ns2 Using Aodv Protocol

i am getting the folowing error while running the tcl script:-
can't read "source1": no such variable
while executing
"set source1"
(file "gray.tcl" line 109)
abhishek@ubuntu:~/Ns2$ ns gray.tcl
num_nodes is set 9
INITIALIZE THE LIST xListHead
can't read "source=1": no such variable
while executing
"set source=1"
(file "gray.tcl" line 109)