Asus Eee PC 1005HA-PU17 How To Install Linux?

Hi guys,

I'm new to this forum and linux too.
I thought of installing a lightweight distro of linux and did some research on the net where I found people recommending Puppy Linux. Plus it is (theoretically speaking) possible to run it from a USB (flash) drive which I decided to try out but it seems like it's not that simple a task as a lot of people (all over the internet) say it is.

What I tried so far is this: installing it into a thumb drive using unetbootin follwing a youtube tutorial (which basically showed how to download an iso of puppy, use unetbootin to make the thumbdrive bootable and install puppy on it). It didn't work. The USB wasn't recognized as a bootable device. I know for sure it can be booted from it since I tried ubuntu from the same USB and the same Laptop (which is able to boot from USB).

I thought that something with the Flash Drive not OK so I tried to use a windows installer to install puppy like other windows programms but this didn't work either. This time Puppy was recognized because there was an option to boot either Puppy or Windows 7 but when I chose to boot from Puppy nothing happens just a screen flash, some letters in the top left corner saying something like NTSC or NTSF (I can't read it properly because it goes away too fast) then after the screen flash the whole thing again (boot from win 7 or Puppy I choose Puppy again the flash... basically a loop).

Any ideas what I'm doing wron or what the problem is?

Thank You for any replies.

Good day everyone,

I'm currently a student and as far as I'm aware I still need windows for some program I need, but I am going over to Linux.
(Thus I'm running Windows 8 at this moment)

Today I was going to install Ubuntu 14.04.01 alongside Windows 8, everything went well till I hit the 4th step (Installation type page) of the installation:

A message like follows showed:
"This computer currently has Debian GNU/Linux (Kali Linux 1.0.7) on it. What would you like to do?"

There are then 3 options available:
1) Install Ubuntu alongside Debian GNU/Linux (Kali Linux 1.0.7)
2) Replace Debian GNU/Linux (Kali Linux 1.0.7) with Ubuntu
3 and 4 is greyed out.
5) Something else (You can create resize partitions yourself, or choose multiple partitions for Ubuntu.

I just want to make sure what option to choose, I cant afford to lose all my data and windows.

Problem: Showing Kali Linux as current OS and not Windows 8.

Possible reason for showing Kali Linux as current OS:
I have a live CD of Kali Linux and ran it a few times in the past, but according to my knowledge it shouldn't have changed anything.

Maybe the 1st option is still the right one even though the current OS isn't listed right? Or the 3rd option is like a manual setting I guess.

Thanks for the time reading and helping!

Hello All, I am a newbie to Linux I have used computers for years & would say I'm certainly not computer illiterate, however I am completely new to Linux. Hubby & I have a netbook each & I wanted to give linux a go on them. I installed Mint 17.1 Xfce on mine & am loving it, not really having any problems. However this is not the case with hubby's netbook....which has the following spec:

eeepc 904HD
80 GB HDD
Intel Celeron M, 897 mHz (512 cache, 32 bit)
995 mb RAM
VGA - intel 915/GMS/910GML express graphic controller (rev04)

(mine has the atom processor & was shipped with windows 7 starter which I have dual booted with mint

On hubbys we have tried the following distros:
Mint 17.1
Mint 13
Lubuntu
Xubuntu
Zorin 9 lite
Bhodi 3.0.0

The problem we're experiencing with each & every distro is the mouse/touchpad freezes. In the live version all is OK, then once installed still OK...but only last for a couple of shutdowns & then the above problem kicks in. sometimes after the freeze it may work ok again the next time it is booted but not long before the freeze occurs again.....obviously xinput shows the elantech touchpad is not listed
I know it is a low spec netbook but there are many distros which claim to work on a much lower spec than this. I am not sure if this processor supports PAE as it often mentions PAE not supported on celeron M's but I also read that the pc usually needs to be pre 1995 to not support PAE & this netbook was made around 2008
I must say that most of the distros we've tried seem to be running OK until the 'freeze' put top hat on hit...so I am stumped as to what the issue is and hope some of you more experienced guys can point me in the right direction....i.e. a suitable distro for use on this eeepc netbook. My hubby does nothing fancy on the pc, he's just really browsing, skyping would be nice....OH & he is very computer illiterate....so something simple to use, fast & lightweight is all that is required.
The next distro I was going to try was leeenux linux, which is supposed to be perfect for the eeepc, but the only 2 free versions I could find is version 5.1 extended & v6 lxde SSD 2g
Many thanks in advance !!

I've made a couple attempts at installing these OS's on my machine and am still not getting it. I've actually been using AVLinux for about the past nine months, and it's working fairly well. And, yes, I know XP is down for the count, but for the moment it's the only MS option available to me - and I *need* to get it running for some work related web stuff...

This is all on a 32 bit AMD system btw.

What I've tried: Everything on one SATA drive. Partition one formatted to NTFS (about 20GB) for XP. Partitions 2 and 3 are Root and Home for AVLinux, Partition 4 at the end of the drive as the /swap for AVL.

All the how-to's and guides I've been able to come across point to (usually) Mint or Ubuntu's install dialog, and to select "something else" - which, by the way, is not a function of AVLinux's installation procedure. During install you can install GRUB to the MBR *or* root partition..

So, just to clarify to procedure (as I might have it now, but am very unsure) XP gets installed first (which is done at this point...) then my Linux distro *to the MBR* (?) then I need to add a stanza to GRUB telling it where XP lives? XP is not showing up on GRUB as I'm doing it, but I'm not too sure if installing Linux to the MBR (on the same physical drive as XP) actually wipes out the Windows bootloader....and if so, how chainloading would actually work...

So, any help appreciated, thanks.

First time Linux Mint user and fist time poster to this forum. Need to install a Linux distro on my family member's HP Mini 1000, an older netbook with minimal hardware (1 GB memory stick, Intel Atom N270 processor, 80 GB ATA HDD, and it runs XP SP3. . I advised her to uninstall XP and buy Windows 7, but she doesn't want to spend the $93. So ...

I have been testing different Linux distros from flash drive on my HP Probook 4530S laptop. Have tried Ubuntu 14x and now Mint, which I prefer. Ubuntu wouldn't boot to desktop on the netbook after choosing "Use without installing." Mint runs OK on it, but I can't configure the wireless connection. I suspect that either the network hardware isn't compatible or I am missing something when trying to manually configure the settings. I read some info from the Mint web site about this issue, but not sure about whether the Mini's wireless card is compatible: Broadcom 802.11b/g WLAN. Does updating Windows drivers help with this?

TIA,

Don

Im trying to break free from windows. just got puppy 4.3.1 and know nothing about linux . after trying a full install it will not reboot without cd in the drive, just says error loading operating system.My system has more than required amount of ram and almost 40 gig hd. have only 1 partition formated to ext2. could not figure how to use grub.

ps. also canot connect to wireless router

I just got a new laptop with Windows 8.1 and I cannot figure out how to install Linux Mint by booting from a CD or USB drive. Previously, I had installed Linux Mint on my old desktop and netbook computers that were running Windows XP. I had no trouble booting from a CD. Now that the process has been complicated in Windows 8.1 I don't know what to do. Any help would be greatly appreciated, I would really like to get rid of Windows 8.1 ASAP. Thanks!

Hi all,

As you can probably tell I am new to Linux and new to the forum, I am using Kali and Mint both as live Linux environments on USB drives, all is good and I am finding my way around, the reason for the post is that I need to copy 15 CF cards that have multiple partitions, Windows isn't really an option as it can only see one partition on a removable drive, so here goes with Linux.

The CF cards contain Windows Embedded XP in one partition and a separate partition for user data which isn't protected, not that the contents matter, only the fact that it is bootable with multiple partitions, the object is to upgrade the old 2gb cards to 4gb cards to add an additional program on the embedded drive, but they are both full.

as long as I can copy both partitions over the partition size doesn't matter as I can resize that if necessary, but I need both partitions to copy over to the new drive.

I have read that dd command is the way to go but cant find much on multiple partitions which display in Linux as two drives, so how do I go about this, any pointers

Ideally I would like to automate the process as this is something that we could end up doing on a regular basis, I have seen a USB drive that was plugged into a PC and through a basic GUI allowed you to copy a HDD but I don't know If that would do both partitions, something for the future?

Hello,

I am looking for a live linux distro that is able to recognize more hardware by "default" without installation. For example, when I borrow a laptop/netbook, I want to be able to boot the live linux distro and be able to have wireless access to internet (at least most of the time).

I know how to get the wireless working if I have internet access to begin with, but sometimes I do not have a wired connection or am not allowed to install stuff.

I would like to try many live distros on different laptops, but it would be hard to convince other people to give me their laptops to do that; so I would really appreciate your help.

Thanks

I'm working on switching from mac os x to gnu/linux. so far the distros that seem most favorable to me are the ones listed here.

what should I try? also, x86_64 is the version I should use for a mac, not i386 or i486 or i686, right? I know I can run i386 but I think x86_64 is what will allow me to use all the ram.

I am trying dragora right now and I can't get it to install. I used gnu parted to make a linux partition but it doesn't recognize it when I try to setup.

how do I remove or partition the gpt?

Is there any way to make multiple bootable install partitions on non-rewritable DVDs?