Inquiry:How To Convert .wav Sound Files To .gsm Format With Sox Utility

i have a few score of files (>50) in fasta format. these work fine in linux os
but i have to send these to a collegue who uses windows. and these files don't open properly in notepad or wordpad. executing save as to windows format does the trick

but i don't want to manually convert all of them

is ther a way i can accomplish conversion of multiple files and saving them in a format of my choosing using say terminal

Hello.
How can I Convert FAT32 to NTFS without format? In windows I can use below command and it work very nice but how about Linux?

convert Drive: /FS:NTFS

Thanks.

Want to convert mpeg-4 to mp3 using sound converter but keep getting
could not decode stream "gstreamer problem". anybody any ideas.

So I have 1 gb micro SD card made by Nokia and it just refuses to be formated.

I've tried many ways but it just won't completely format. This is what I've tried
ayy did "diskpart" utility in Windows to remove protection by command "volume disk clear readonly" allowed to format once but doesn't compelely blank it Tried the builtin "Disk Utility" to format but gave me an error, "Error synchronizing after initial wipe: Timed out waiting for object (udisks-error-quark, 0)" Installed Gparted. Did simple rightlclick format to NTFS but it gave me an error "LVM not supported loop disk label" Tried giving multipel commands, delete disk [makes it unallocated drive] create new ntfs Primary partion, gives me an error "too many primary partition"
I've attached the Gparted error log. [can't attach html, pasted the code]

What can I do now? It just keeps getting in its Nokia files back and wont leave FAT format, i want to make it NTFS so i can use it in the camera. It's not corrupted because I can paste files on to it on the desktop. Also its not locked by a physical button

Code:

GParted 0.19.0 --enable-libparted-dmraid --enable-online-resize

Libparted 3.2
Delete /dev/mmcblk0 (fat16, 968.75 MiB) from /dev/mmcblk0  00:00:00    ( SUCCESS )
     	
calibrate /dev/mmcblk0  00:00:00    ( SUCCESS )
     	
path: /dev/mmcblk0
start: 0
end: 1983999
size: 1984000 (968.75 MiB)
delete partition  00:00:00    ( SUCCESS )

========================================
Create Primary Partition #1 (ntfs, 967.00 MiB) on /dev/mmcblk0  00:00:00    ( ERROR )
     	
create empty partition  00:00:00    ( ERROR )
libparted messages    ( INFO )
     	
Too many primary partitions.

========================================

Code:

GParted 0.19.0 --enable-libparted-dmraid --enable-online-resize

Libparted 3.2
Format /dev/mmcblk0 as ntfs  00:00:00    ( ERROR )
     	
calibrate /dev/mmcblk0  00:00:00    ( SUCCESS )
     	
path: /dev/mmcblk0
start: 0
end: 1983999
size: 1984000 (968.75 MiB)
clear old file system signatures in /dev/mmcblk0  00:00:00    ( SUCCESS )
     	
write 68.00 KiB of zeros at byte offset 0  00:00:00    ( SUCCESS )
write 4.00 KiB of zeros at byte offset 67108864  00:00:00    ( SUCCESS )
write 4.00 KiB of zeros at byte offset 1015803904  00:00:00    ( SUCCESS )
flush operating system cache of /dev/mmcblk0  00:00:00    ( SUCCESS )
set partition type on /dev/mmcblk0  00:00:00    ( ERROR )
libparted messages    ( INFO )
     	
The flag 'lvm' is not available for loop disk labels.

========================================

I have just downloaded imagemagick and when I try to convert a pdf file to a jpg file. I get the message no such file or directory. The file I want to convert is in Home/Downloads

I have a server sending me a plain text email every day, reporting the below parameters. Its reading them from a text file, and sending them to my email.

How can convert this to a three column html table and send that?

Code:

Sync Total: 1 directory, 4 files, 0 symlinks
---------------------------------
Host Name: host name here
---------------------------------
Group Name: group name here
---------------------------------
Disk Usage: 37%
---------------------------------
CPU Usage: 78%
---------------------------------
Memory Usage: 11%
---------------------------------
Temperatu  44.9'C
---------------------------------
Local IP: 192.168.0.115
---------------------------------
Public IP: public ip here
---------------------------------
Tunnel Port: 5001
---------------------------------
Tunnel Status:
Fri Mar 6 06:23:00 EET 2015 opening reverse tunnel from my_host_he 5001 to 127.0.0.1:22
---------------------------------

Thanks

Hi,

Could anyone please explain as understandable as possible how could I on my Windows 8 open either single file or install (and use) entire software which is supposted to work on Linux and/or Ubuntu? I have absolutelly NO experience with Linux and have never used it. Honestly, I don't know if there is any difference between Linux and Ubuntu. I want to be inside my Windows 8 while using Linux files/sofware. The only solution I could think of are actually two but neither of them is useful for me:

1. Vmware (i don't know how to use it)
2. Rent remote computer (vps/rdp) with linux OS installed (this would let me be in Windows 8 while being able to use Linux file/software [on remote computer] but sooner or later I would want to have Windows installed there too)

Tried program Linux Reader but didn't work on my Windows 8. Although I would need solution for installation/usage of software (that can be used only on linux/ubuntu), regardless of details***, the current problem is basically related to single files only: I have two files, both in IMG extension. Don't know how to open them because Deamon Tools doesn't handle IMG. The problem is that filesystem in one of them is "Linux" and filesystem in another is "142". The error I am getting when I try to open them is:

"File with harddrive/disc snapshot is corrupted."

But this is most likely because they are supposted to be used in linux environment, hence such question.

*** when i said "details" I was referring to basically anything: type of software, size, purpose, whether or not it needs network connection, whether or not it contains logging in (username password, etc) requirement, etc.

The following solution for current situation (quoted error above) works only partially:

http://www.sysprobs.com/simple-tip-h...thout-software

I am able to open/run/mount IMG if I do what is described on this link (im basically opening iso in this case - see the website) but when opening the virtual drive, the following error message proves that the file can be used in linux/ubuntu only:

"Windows cannot access that drive. Drive could be corrupted. Make sure the drive is in condition that can be recognized by Windows. If drive isn't formatted then format it before usage."

Would need detailed instructions, for total beginner, who has never used linux/ubuntu, what to do in such case: how to use in win8 files/software that are supposted to be used in linux/ubuntu. Also answer on how to open IMG would be highly appreciated.

Kindest regards and thank you a million in advance.

I just downloaded zorin. I cannot find the sound control, nor do I hear any sound.

I tried to use the search option on this forum but had trouble finding the thread I was looking for.

Thanks in advance


Update: Ok, i got the volume control to show up on the panel, down next to the clock. Everything is turned all the way up, when i pull up pulse audio i can see the sound meter fluctuating while i play a video, but there is no sound coming out of the speakers.

How do i get sound?

Thanks again

Hi
I have installed Linux Mint 17 Mate. I worked very well for many many days. However, today suddenly the sound system has stopped making any sound. Linux Mint is producing any sound, whatever audio/video player I use. How can I fix it?
Update: The sound system in Mate Control Center is making sound, however VLC/MPlayer are not producing any sound. But audacious is making sound.
PS. Other OSes are producing sounds correctly.

I just find the below URL , it shows how to convert file to utf-8 , but it need to check the current encoding first , would advise how can I convert a file to utf-8 without checking the coding first ? thanks

http://ask.xmodulo.com/change-charac...ile-linux.html