Ubuntu 14.04 Custom Boot Screen?

Hi Guys, I installed a dual boot config. on a 160 gb hdd. The first choice in grub menu is Linux Lite (latest distro) and the second boot choice is Mint 17.1 Rebecca. I'm encountering a situation that when I boot into LL the system boots OK. Then when I try a restart and boot into Mint it seems to be doing OK until the end of the boot process at which time the screen flashes the Mint logo and then goes dark-then flashes then goes dark every second or so-endlessly. After a while I'm sometimes able to get Mint to finish booting by hitting the esc key. Any ideas how to make this screen flashing situation stop and do a normal boot?

Update: Solved the problem by changing the resolution settings to coincide with those of LL....flashing stopped!

LL and Mint IMHO are two of the best distros for a Newbie to "get their feet wet." - I know, I am that Newbie.

Hi, So im quite new to linux and im not surprised as iv tried before to check it out and failed then (old computers problem) but i decided to have another go on a new comp recently.

UEFI mobo
Nvidia geforce 770 as output.

I need a duel boot of win7 & mint. Win7 is installed.

UEFI has caused me so many problems its just beyond me ! (i had never heard of it before i brought this comp)

booting Mint from a cd/dvd works fine.

booting from a USB fails with a blank or locked up screen at the first mint logo. (many tests with dif methods of creating live USB)

Installing mint with grub over the top of win boot loader fails , i get no options to choose between win & linux it boots straight to linux and then fails (same error as above)

I have a small SSD with win7 , there is not a lot of space on it so i want to install mint 17.1KDE on a different HDD.

After a month or so of reading testing reading testing etc i ended up getting mint installed on partitions i created on secondary HDD but i had to keep the windows boot loader in place and use easyBCD.

However now i get the choice of win7 or linux and windows still actually works (breakthrough ^^) BUT linux just crashes at boot (at the first logo) and then the monitor looses all signal?


I am soo frustrated. Mint will run of a CD but i can not get it to work in any other way , please help

Thx.

I have windows 7 laptop, Dell. I downloaded the newest edition of Ubuntu (Twice)to see if it would install and dual boot beside Windows 7. Unsucessful on several attempts. Once I reboot the computer it will give ma a choice of 7 or Ubuntu. I decide on Ubuntu it starts to boot into Ubuntu than a black screen with all types of Kernel error codes that i'm unfamilur with. one is---(1.292618) kernel panic-not syncing: no working init found.

Try passing init option to Kernel (see Linux Documentation/init.txt for guidance..

I am not sure what all this means any help would be appreactiated...

I am trying to boot Linux Mint from an 8gb Sandisk USB. I changed my boot settings and it boots into what I believe is called grub? I am given two options, Boot Linux Mint, Boot Linux Mint (compatibility mode). When I select either of them all I get is a black screen. I've tried many things to get around this, messing with my graphics card settings (within grub), different USB's (another 8gb and a 32gb), I tried Ubuntu and that just doesn't boot at all I go straight back to my UEFI settings. I'm very new to Linux and I don't just want to hop in, I just want to boot from my USB whenever I want to play around with it. Thank You

Note: I'm running windows 8.1 currently on a ASUS N550JV laptop. I've been using the UUI from Pen Drive Linux.

Hi,

I am new to the Ubuntu OS and really enjoying it but currently have an issue with my Acer Aspire ES1 512 laptop with regards to getting the machine to completely shutdown or restart.

It is not a dual boot setup, 100 Ubuntu 14.04 LTS install but when I attempt to press the "Shutdown" option at the top right, it looks like the machine is shutting down, shows the Ubuntu logo with dots but does not physically turn off the machine.

At the moment, I have to physically press and hold the power button.

FYI, I have also tried sudo shutdown -h now

Any ides/help would be great as it's the only issue I am currently experiencing.

Thanks.

I have a Toshiba laptop that will not boot. I get to the grub menu which gives me the option to load Ubuntu, Ubuntu recovery mode, or a couple of memory tests.

If I select Ubuntu I get a black screen with a flashing cursor in the top left corner.

Selecting recovery mode gives me a lot of messages with the last one being "EDD information not available".

The memory test option does not return any errors.

If I try booting Mint from a bootable DVD I get the Mint screen and then it goes gray with a flashing cursor in the top left corner.

Any suggestions?

Hey all,

I've got an HP Pavilion dm4 Notebook that's been like a good friend to me in the past, but hasn't been running as well as it used to. I decided to move on to something new that I knew would work - some form of Linux. I chose Lubuntu, as I had heard so many good things about it and wouldn't need to run loads of processes.

I ran through the installer from a flash drive and installed Lubuntu 14.04 onto my machine, and was then prompted to reboot. Now I'm stuck on the Gnu Grub page, where *Ubuntu is listed instead of *Lubuntu. Whenever I hit Ubuntu to start, screen cuts to black, I see the HP logo and BIOS login note, and am dropped back in front of the Grub page. This is my first true experience with the Linux kernel (I've played with Raspbian).

Does anyone have any insight as to what's going wrong? I haven't yet been able to login and am unsure regarding where to go.

Thanks
-K

hiiii all

I had installed Windows 7 on /dev/sda1 and /dev/sda2 and then I installed Centos 7.
Since then I cant find Windows entry in the Grub.
And i had tried to use all kind of solution found on the net I still cant see any entry.
I had edited 40_custom script adding:

cat <<EOF
menuentry "windows 7" {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
search --no-floppy --fs-uuid --set=root FCDAE998DAE95006
chainloader +1
}
EOF

then this command grub2-mkconfig -o /boot/grub2/grub2.cfg

[root@localhost]# grub2-mkconfig -o /boot/grub2/grub2.cfg
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.10.0-123.el7.x86_64
Found initrd image: /boot/initramfs-3.10.0-123.el7.x86_64.img
Found linux image: /boot/vmlinuz-0-rescue-93890f189dec4b309c004fdce969ca5a
Found initrd image: /boot/initramfs-0-rescue-93890f189dec4b309c004fdce969ca5a.img

then this
[root@localhost]# tail -10 /boot/grub2/grub.cfg
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
[root@localhost]#


Still cant find windows in grub
please help me with this guys
thanks

hello there,
i am in the process of creating a custom linux distribution out of Ubuntu 12.04. i have recompiled the kernel with a few custom tweaks, added a light desktop enironment and uninstalled certain unwanted programs. now i want to create my own distribution CD of this operating system for my small office .
I have alraedy tried REMASTERSYS, which has been discontinued, hence. i have created a backup (ISO)from RELINUX which is not getting deployed on a VM or not helpful in creating a installable CD.
i need help in creating a installable CD of the OPERATING SYSTEM from my PC so that i can use it as a CUSTOM DISTRO.
I'm a newbie please dont mind my language and inadequacy of information if any
Regards

I install fgrlx driver on vivid os the driver look like is istalled correct on system and built the necessary kernel modules because the dpkg log not report any errors, i configured the driver by simple commands like:

sudo aticonfig --initial

sudo aticonfig --screen-layout=on

i reboot the machine , but i face an strange issue the boot splash screen is hangup,i cant enter my lvm password to boot the system, i was have a chance to boot into rescue mode when boot to rescue mode the display not read by the system i try to export display by

export DISPLAY=:0

I try to configure /etc/X11/xorg.conf there is not good resaults the boot splash still hang up

I edited the grub , i uncomment "quiet splash" modified by "nomodeset"

i can boot without boot splash but im faced other issue i cant switch to virtual tty

i dont know is this a bug in the driver or in the kernel

any suggest