I Set Up An Ext4 Partition On External HD To Store Media Files. Permission Issues

I have a Toshiba Laptop that had a Dual Boot of Windows 7 and Linux Mint 17 on it and both OS's worked fine. I've been wanting to use CentOS 7 as my primary OS so that I can become more familar with RPM management and proceeded to remove my Mint installation and replace it with the CENTOS 7 installation, and the install completed successfully. HOWEVER, here's my problem.....

When my laptop starts up, I don't see GRUB nor do I have any option of selecting whether to run Windows or CentOS. It automatically loads up Centos 7. When I do a 'sudo fdisk -l', I can see that SDA1 is an NTFS drive, and when I try the following 'sudo mount /dev/sda1 /media/Main\ Drive' I get an error message saying that I can't mount an NTFS drive.

Am I missing something or is there a way to access my Windows files from within Centos. I was able to do this with Mint without an issue, but unable to see any of my windows drives because I can't mount an NTFS drive.

I have no problem with keeping CENTOS as my only OS on this laptop, however, I do need to access the files from the Window's partition, and if anyone can help me to access my files, that would be totally awesome.

Thank you in advance for reading through this and for any help offered.....

Mikey

Hi folks,

as my title says, i need to protect an ext3 partition in my external 500GB toshiba usb hard diks. it is a 250gb Partition. so if i try to open the partition on any linux or windows system (using a utility), it should ask for a password to open the partition. pls advise.

Hey,

My plan is to run some Linux distro's on an external USB HDD. So far I have been able to instal elementary OS, it thus far boots with the elementary OS logo and hangs for a while when it gives me the following message:


"Gave up waiting for boot device.
- Boot args (cat /proc/cmdline)
- Check root delay (Waiting long enough?)
- Check root (Waiting for the right device?)
- Missing modules (cat /proc/modules; 1s/dev)

ALERT! /dev/disk-uuid/*super long number* does not exist. Dropping to a shell!

BusyBox v1.21.1 (Ubuntu 1:1.21.0-1ubuntu1) build-in shell (ash)

Enter 'help' for a list of build-in commands."


To give you an idea of the external HDD partition:
60 GB: ext4 (elementary OS)
4GB: SWAP
Free Space
80 GB: NTFS (Random files)

The ext4 was given '/' for mounting point to keep it simple for now. The 'boot part' I've set to instal on sdc. Which is the external HDD. (I wasn't sure whether I should have chosen the ext4 partition or not.)

Please let me know if you need any addition information. I hope someone is familiar with the problem or knows a solution.

Thanks in advance.

Hello.

I have checked the other threads and either I have missed my answer or did not understand that it was the answer. I apologise in advance if I am being a repeater:

The Problem: I am running 17 mint. I installed a toshiba external Hard Drive using Gparted- Fast and easy, BUT, somehow I installed the external as root, I cannot move files to the external because I am not root? Under permissions it states that the Owner Cannot Be Determined.
Any help would be great.

Have a great night, morning or afternoon!

I have followed all the instructions I have got from the net and made boot-able DVD's and USB sticks several different ways as people advise. I have done the same with Mint 17. I have created a partition (26G) and follow the install instructions 1: English 2:Has at least 7.4G available drive space. 4: Is connected to the internet. 5: Here it shows a page where I think it should display the drive options (but does not) If I push the "install now" button it comes up with an error "No root file system is defined --Please correct this from the partitioning menu" I close the installer and look at the drives in GParted and they are all there and the one I created for Linux is PARTITION - /dev/sda4 FILE SYSTEM - ext4
MOUNT POINT - /media/makulu/0C43086E0C43086E LABEL - Lin
SIZE - 26.02 GB USED - 590.07 Mb UNUSED - 24.44 GB FLAG - (blank)
No indication on how to fix the "No root file system" problem. I have tried so many bits of advise that I am beginning to think that I may be better of sticking to windows (perish the thought)
Can anyone help?
Col

Hi all. My first time post and very new to linux.
I am using linux Mint Debian version.

My goal is to auto mount 2 external harddrives (Each hard drive is 2TB) attached to the 2 usb ports on my asus wireless router model rt-n56r.

I have succeeded in auto mounting my first drive HDD1 by configuring fstab file:

//192.168.1.1/HDD1 /media/public cifs username=**,password=**,rw,nounix,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0

At boot this partition is mounted without issue.

In attempting to mount the second hard drive HDD2 I added another entry in fstab as follows:

//192.168.1.1/HDD2 /media/public cifs username=**,password=**,rw,nounix,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0

It appears that both HDD1 and HDD2 mount however, when entering the partition only files and directories of the second hard drive appear.

So I changed the mount point in the second hard drive to reflect /media1/public1 and after the configuration neither hard drive appears to have mounted.

I tried using UUID instead of path to partition but cannot get even 1 attached hard drive to mount.

I appreciate in advance the help and assistance to my query.

Hello Everyone
I have installed Ubuntu Server on a 500 GB drive formatted as EXT4.

Of of my Media, movies, music and pictures are from Windows PC's formatted in NTFS.
As all of the computers connecting to the server will be windows based will NTFS be fine or will I have to reformat them to work. The two media drives are 2 x 2GB Sata drives.
Could you tell me if this setup would work or will I have to reformat and and transfer the files to a new filesystem.
Also as a file server whats the best linux file system to use so it will work with windows PC's in a lan flawlessly.
Thanks for you expertise.
Regards

I've made a couple attempts at installing these OS's on my machine and am still not getting it. I've actually been using AVLinux for about the past nine months, and it's working fairly well. And, yes, I know XP is down for the count, but for the moment it's the only MS option available to me - and I *need* to get it running for some work related web stuff...

This is all on a 32 bit AMD system btw.

What I've tried: Everything on one SATA drive. Partition one formatted to NTFS (about 20GB) for XP. Partitions 2 and 3 are Root and Home for AVLinux, Partition 4 at the end of the drive as the /swap for AVL.

All the how-to's and guides I've been able to come across point to (usually) Mint or Ubuntu's install dialog, and to select "something else" - which, by the way, is not a function of AVLinux's installation procedure. During install you can install GRUB to the MBR *or* root partition..

So, just to clarify to procedure (as I might have it now, but am very unsure) XP gets installed first (which is done at this point...) then my Linux distro *to the MBR* (?) then I need to add a stanza to GRUB telling it where XP lives? XP is not showing up on GRUB as I'm doing it, but I'm not too sure if installing Linux to the MBR (on the same physical drive as XP) actually wipes out the Windows bootloader....and if so, how chainloading would actually work...

So, any help appreciated, thanks.

Booted my computer with 2 USB flash drives inserted. One of the drives turned out to be an MS-DOS boot drive. The PC booted in DOS and wiped out the partition table of the other flash drive with my data on it. This second (64Gb) drive had a single 64Gb type 83 (Linux) primary partition (ext4 file system).

Is there a way to recover the data that's on the second stick?

I've been told that all I have to do is repartition it exactly as it was and my data will be there. But I'd like to have advice from the pros here before I start messing with it.

For the time being, I dd-ed the entire stick, as is, onto a blank partition of my hard disk (dd if=/dev/sdb of=/dev/sda14). The process completed without errors but /dev/sda14 is unmountable for the moment.

Thanks for any help.

i bought new 320gb hard drive

and using windows i partitioned it into two

my problem now i cant mount the hard drive

and i cant find the other partition

plz help me the proper way to install


thanks so much