hi all,
I'm new here.
I have similar problem with running a C project that uses GLUT/OpenGL graphics...
every run result with the two lines:
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
sometimes the graphics works ok sometimes there is an infinite loop, but every execution result with the two lines above.
what is the meaning of these 2 lines?
Is it an Error or Warning?
How can I fix the code?
My guess is that there is a fundamental problem with the graphics Glut Library...Or that I didn't write the MakeFile OK
Please help me, I would extremly appriciate it.
Jonathan
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
after writing the command
glxinfo | grep OpenGL
the results are
can any one help me
Xlib: extension "GLX" missing on display ":0"
Good Morning! I am supporting the coffee and Doritos industry with my frustration with this problem. I have been battling it for two months. I have several Red Hat books, the official Red Hat study guide, and have searched the forums for weeks with no avail. I was wondering if you have ever had this?
I am trying to "telnet server.example.com 25" or telnet in general. Both servers are running on a KVM on the 192.168.122.0/24 network.
[root@server ~]# telnet server.example.com
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
Trying 192.168.122.191...
telnet: connect to address 192.168.122.191: Connection refused
I can ssh, run NFS, and also run internal postfix e-mails.
IPTABLES IS TURNED OFF ON BOTH CLIENTS
Postfix and Telnet is configured on both clients, with both listening:
[root@server ~]# netstat -tulpn |grep :25
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 1802/
When I Telnet from client named 'Server' to client named 'ISCSI', tpcdump on client 'ISCSI' gives the following:
19:01:23.579330 STP 802.1d, Config, Flags [none], bridge-id 8000.52:54:00:2e:85:0e.8003, length 43
19:01:23.632750 IP server.57477 > iscsi.example.com.telnet: Flags [S], seq 2403459934, win 14600, options [mss 1460,sackOK,TS val 2679191 ecr 0,nop,wscale 6], length 0
19:01:23.632882 IP iscsi.example.com.telnet > server.57477: Flags [R.], seq 0, ack 2403459935, win 0, length 0
19:01:24.428091 IP server.57478 > iscsi.example.com.telnet: Flags [S], seq 942066757, win 14600, options [mss 1460,sackOK,TS val 2679990 ecr 0,nop,wscale 6], length 0
19:01:24.428163 IP iscsi.example.com.telnet > server.57478: Flags [R.], seq 0, ack 942066758, win 0, length 0
19:01:25.006222 IP server.57479 > iscsi.example.com.telnet: Flags [S], seq 2689610466, win 14600, options [mss 1460,sackOK,TS val 2680564 ecr 0,nop,wscale 6], length 0
Hello everyone,
Although it seems easy, I've been stuck with this problem for a moment now and I can't figure out a way to get it done.
My problem is the following:
I have a file where each line is a sequence of IP addresses, example :
Line 1: 10.0.01 10.0.0.2
Line 2 : 10.0.0.5 10.0.0.1 10.0.0.2
...
What I'd like to do, is to remove lines that are completely matched in other lines. In the previous example, "Line 1" would be deleted as it is contained in "Line 2".
So far, I've worked with python and set() objects to get the job done but I've got more than 100K lines and sets lookups are becoming time consuming as the program goes :/
Thanks for you help
Hello,
I'm working on a shell script that needs to read the a file (file1) a batch (read 2000 lines at a time) and then write those lines to seperate file which I'm using to run ldapmodify command. I need to check some other file size and once this file less than 200kb, i would need to run second batch and so on until file1 is empty.
Quote:
#!/bin/bash
set -x
filesize=200
server=10.11.xxx.xx
filename=fileimport.txt
taofile1=687686.txt
taofile=/var/opt/$taofile1
stty -echo
echo -n "Enter password: "
read passwd
stty echo
context="cn=user1,ou=org1,ou=org2,o=org"
if [[ -s "$filename" ]];then
for lines in $filename
do
head -99997 fileimport.txt >> ldapreadd.ldif && sed -i '1,+99996d' fileimport.txt
if [ -s ldapreadd.ldif ];then
ldapmodify -h $server -p 389 -D $context -w $passwd -v -x -f ldapreadd.ldif &> /dev/null
echo "LDIF script is running. Please wait..."
sleep 60
if [ -f "$taofile" ];then
taofilesize=`stat -c %s ${taofile}`
# if [ "$taofilesize" -ge 200 ];then
while [ `stat -c %s ${taofile}` -ge 200 ]
do
echo " Driver is processing LDIF file. Please wait..."
sleep 60
done
fi
rm -rf ldapreadd.ldif
fi
done
else
echo "$filename file is empty. Exiting script..."
exit
fi
I have 2 issues here. first one script is not reading exact lines as specified. Some times its reading more lines some times less lines. Second issues once it run the first batch, script is exiting. Please advise.
Hello guys. When ever i tried to run CRCN protocol i am getting following error:
harsh@ubuntu:~/ns3/test$ ns test1.tcl
num_nodes is set 10
missing operator at _@_
in expression "$i < $val(ni) _@_$val(channum) "
(parsing expression "$i < $val(ni) $val(cha...")
invoked from within
"for {set i 0} {$i < $val(ni) $val(channum) } {incr i} {
$ns_ add-channel $i $chan_($i)
}"
(file "test1.tcl" line 48)
Can someone guide me how to correct this error??
Thank you
Hie, I keep getting error like these in may mail log and some emails are not delivering.
May 15 16:37:27 masvingocity postfix/qmgr[39895]: B4AE5C5D2F90: from=<lawretanya@masvingocity.co.zw>, size=15826, nrcpt=2 (queue active)
May 15 16:37:34 masvingocity postfix/smtp[47626]: connect to mail.crocoholdings.co.zw[41.191.234.234]:25: Connection refused
May 15 16:37:34 masvingocity postfix/smtp[47626]: B4AE5C5D2F90: to=<tarisaim@crocoholdings.co.zw>, relay=none, delay=100379, delays=100371/0.03/7.5/0, dsn=4.4.1, status=deferred (connect to mail.crocoholdings.co.zw[41.191.234.234]:25: Connection refused)
Dear All
I need your help.
I want to get a file from windows server using ftp.
Below is the script I have created but the connection is not established:
#!/bin/sh
lcd "directory in linux server"
USER="username of windows server"
PASS="password"
ftp -n "ip of windows server" <<EOF
user $USER $PASS
cd "C:\Users... directory in windows server where file is located"
bin
get test1234.txt
bye
EOF
I hope somebody can help me!
BR,
Hi
It's my first post,please bear with us.I write thesis "The concept of using energy metrics for route selection in OLSR routing protocol". I use the simulator ns2, and UM-OLSR patch. In tlc script I use "Energy model". How and where(in code, or tcl cript) I can change parameter "willingness" during simulation to take into account the level of battery.
pseudocode
if (battery < 1.0) && (battery > 0.8)
{willingnes = WILL_ALWAYS};
else if (battery < 0.8) && (battery > 0.4)
{willingnes = WILL_DEFAULT};
else if (battery < 0.4) && (battery > 0.2)
{willingnes = WILL_LOW};
else if (battery < 0.2)
{willingnes = WILL_NEVER};
Hi All..
I need to give four lines of gap(Freespace) between two command outputs.
what i did was below
Code:
echo "" >>$LOG_DIR/$LOG_NAME
echo "" >>$LOG_DIR/$LOG_NAME
echo "" >>$LOG_DIR/$LOG_NAME
echo "" >>$LOG_DIR/$LOG_NAME
print "***************** LEVEL 2: Truncating Tables: Success: tables Truncated ***********************" >> $LOG/$LOG_NAME
echo "" >>$LOG_DIR/$LOG_NAME
echo "" >>$LOG_DIR/$LOG_NAME
echo "" >>$LOG_DIR/$LOG_NAME
echo "" >>$LOG_DIR/$LOG_NAME
# Run the load scripts.
echo "***************** LEVEL 3: Loading Dupe Check Tables: Success: Dupe Check tables Loaded***********************" >> $LOG/$LOG_NAME
Is there any better way of writing this command to leave multiple lines between two commands.
Please advise...
On a fresh install of Arch with little more than openbox installed when I try to startx as a regular user this is the feedback I get:
xauth: timout in locking authority file /home/tim/.Xauthority
xauth: timout in locking authority file /home/tim/.Xauthority
xauth: timout in locking authority file /home/tim/.Xauthority
xauth: timout in locking authority file /home/tim/.Xauthority
Fatal server error:
(EE) cannot open log file "/home/tim/.local/share/xorg/Xorg.0.log"
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
xauth: timeout in locking authority file /home/tim/.Xauthority
After looking into the error someone suggested to copy the file from root user. When I try to view, less, or open the file I get strange feedback "magic cookie" and then everything starts to trip out and I cant seem to reverse it without a reboot.