How To Define Variable In `ssh`

I need to use `ssh` to send command to different computers to run programs. Can I define a variable of `Directory` and `program` in front of this shell script? Then, I do not need to write them every time? The following is my shell script.

`host_list=("c15-0330-10.ad.mtu.edu" "c15-0330-11.ad.mtu.edu" "c15-0330-12.ad.mtu.edu")`
`# I have multiple programs`
`# program=c("L_1","L_2","L_3")`
`ssh -f "${host_list[0]}" 'set Directory="/home/campus27/zwang10/Desktop/AWRR/program/power/vmodel_1/nprot/K_10"; cd $Directory && nohup Rscript L_1.R> L_1_sh.txt;echo "The job L_1 is finished" |mutt "zwang10@mtu.edu" -s "The job L_1 is finished"';
ssh -f "${host_list[1]}" 'set Directory="/home/campus27/zwang10/Desktop/AWRR/program/power/vmodel_1/nprot/K_10"; cd $Directory && nohup Rscript L_2.R> L_2_sh.txt;echo "The job L_2 is finished" |mutt "zwang10@mtu.edu" -s "The job L_2 is finished"';
ssh -f "${host_list[2]}" 'set Directory="/home/campus27/zwang10/Desktop/AWRR/program/power/vmodel_1/nprot/K_10"; cd $Directory && nohup Rscript L_3.R> L_3_sh.txt;echo "The job L_3 is finished" |mutt "zwang10@mtu.edu" -s "The job L_3 is finished"';`

Get The Time When Nohup R Program Finishes

I want to get the time when program starts and finishes. But it always show the same time. Here is my shell script. But it always show that `START TIME` is same as `END TIME`.
Code:

host_list=("c15-0330-01.ad.mtu.edu" "c15-0330-02.ad.mtu.edu" "c15-0330-03.ad.mtu.edu" "c15-0330-04.ad.mtu.edu")
program=("L_1" "L_4" "L_3" "L_4")
subject="The job is finished"
START=$(date +"r")
address="/home/campus27/zwang10/Desktop/AWRR/program/power/vmodel_1/nprot/K_10"
ssh -f "${host_list[0]}" "cd '$address' && nohup Rscript '${program[0]}.R' > '${program[0]}_sh.txt';echo 'The job\n $address\n${program[0]} is finished\nSTART TIME = $START\n' END TIME =`date +"%r"` | mutt zwang10@mtu.edu -s '${host_list[0]} - Job ${program[0]}.R finished' -a '$address/${program[0]}_sh.txt';"

Mutt Does Not Show Full Subject

I use following shell script to send email. But the subject of email always shows "This" instead of "This is L_1.R is finished". You may refer http://www.linuxquestions.org/questions/linux-newbie-8/how-to-define-variable-in-%60ssh%60-4175540566/
Code:

host_list=("c15-0330-01.ad.mtu.edu" "c15-0330-02.ad.mtu.edu" "c15-0330-03.ad.mtu.edu" "c15-0330-04.ad.mtu.edu")
program=("L_1" "L_2" "L_3" "L_4")
subject="The job is finished"
ssh -f c15-0330-01.ad.mtu.edu 'echo' "the job ${program[0]} is finished" '|' 'mutt "zwang10@mtu.edu" -s' "This is "${program[0]}".R is finished";

Check Empty Variable Without Comments

Hello,

They gave me this:
Code:

#!/bin/bash

# Write error message on stderr and die
function die() {
  echo "$@" >&2
  exit 1
}

# Load var from properties files
function load() {
  for propertie in "$@" ; do
    [[ -f "${propertie}" ]] || die "load() : \"${propertie}\" don't exist !"
    while read ; do
echo "${REPLY%=*}"
echo "${REPLY#*=}"
      [[ -n "${REPLY%%=*}" && -z "${REPLY#*=}" ]] || die "load() : Variable \"${REPLY%%=*}\" is empty!"
      eval "${REPLY%%=*}"=\'"${REPLY#*=}"\'
    done < "${propertie}"
  done
}

load "manage_srcds.conf"
echo "SRCDS_TICKRATE=$SRCDS_TICKRATE"
echo "SRCDS_SCREEN=$SRCDS_SCREEN"
echo "SRCDS_SRCDS_GAME_NAME=$SRCDS_GAME_NAME"
echo "SRCDS_MAXPLAYERS=$SRCDS_MAXPLAYERS"

but, return:
Quote:
###################################################
###################################################
load() : Variable "###################################################" is empty!

cat manage_srcds.conf

I just wish that there was no empty variable excluding those who do not have integer.

Best regards,

How Can I Grep Variable?

I want to And search grep shell

but It's hard to grep variable

---------------------------------------------------------------
#!/bin/bash

if [ $# -eq 0 ]
then
echo "Ussage: phone searchfor [...searchfor]"
echo "(You didn't tell me what you want to search for )"

else

pass=0
find=""

for idx in $*
do
if [ -n "$idx" ]
then
if [ $pass -eq 0 ]
then
find=$(egrep "$idx" mydata)
pass=1

else

find=$("$find" | grep "$idx")

echo $find
fi
fi

done

if [ -z "$find" ]
then
echo "There is no such thing"
else

echo $find | awk -f display.awk

fi

fi

-----------------------------------------------------

there is one error : command not found

in find=$("$find" | grep "$idx")

how can I grep variable and store it into variable?

How To Set A Time Limit Of Ssh

I have a hostlist and there are several hosts. I want to use ssh to connect to them. I want to see whether the host is available or not by the time length of ssh takes. If it take long than 5s (which means it is not available). Then stop it, and ssh to next host. Once a host is available, then output the name of host. I previously use nmap, but the IT security told it is not allowed to install it on the desktop on campus.
Code:

host_list="/home/campus27/zwang10/Desktop/cluster/program/hostlist"
HOSTS=`cat $host_list`
for line in $HOSTS
do 
timeout -5s `ssh $line`
done

The above script is all I can do.

Connecting To Specific Directory With Filezilla

Hello, I have an embedded linux device. I can connect to the device and I can upload or download files. No problem with this. But, at first connection, I want to connect to "/" directory instead of "/root". In the device file system, there are files ssh_config and sshd_config under /etc/ssh directory. I think I have to do something with these files but I don't know what.

I don't exactly know what mean "/root" and "/" directories. I think that the real root directory is "/" directory which is empty but when I connect with filezilla, the "/root" directory is the default so I had to go back to / directory everytime.

Need Help To Get The Available Hosts Among Many Hosts

I have many hosts as following. But those hosts are dual operating system (Linux and Windows). I always run program background. If someone is using Linux, it is fine. But if someone is using windows or the host is offline. Then, I cannot use ssh. The way I do preiviously is first ssh one by one. And then find the hosts which are offline or windows. And write them down one by one. And then ssh to hosts except them. Let us assume the number of programs is less than the total available hosts. Can someone write a shell script to output the all available hosts to a file like "host_available"?
Here is the host file.
https://www.dropbox.com/s/vbz6w864y3...tlist.txt?dl=0
I am using ssh to connect the computers on campus. If the computer I am trying to connect is offline or using windows, the ssh will take long time, and finally it will failed. I write a shell script to generate the hostlist
Code:

#!/bin/bash
for i in `seq -w 1 28`
do
echo "c15-0330-$i.ad.mtu.edu"
# I would like to add a command here to see whether ssh c15-0330-$i.ad.mtu.edu it succeeds or not. And then output a #file which contains the all available host.
done
for i in `seq -w 1 20`
do
echo "c28-0112-$i.ad.mtu.edu"
done
for i in `seq -w 1 20`
do
echo "c28-112a-$i.ad.mtu.edu"
done

I do not how to set a certain time to see whether connection is successful or not (see the comment in the shell script).

Bash Script For Xfce4 Powermanager Settings Switching Forth And Backward

i need a bash script to switch to zero second on ac the waiting time for turning off the monitor (highlighten in red). same as for on battery (highlighten in purple)

Code:

<?xml version="1.0" encoding="UTF-8"?>

<channel name="xfce4-power-manager" version="1.0">
  <property name="xfce4-power-manager" type="empty">
    <property name="power-button-action" type="empty"/>
    <property name="show-tray-icon" type="empty"/>
    <property name="logind-handle-lid-switch" type="bool" value="true"/> 
    <property name="dpms-on-ac-sleep" type="uint" value="1"/>
    <property name="dpms-on-ac-off" type="uint" value="2"/> 
    <property name="brightness-on-battery" type="uint" value="9"/> 
    <property name="dpms-on-battery-sleep" type="uint" value="1"/>
    <property name="dpms-on-battery-off" type="uint" value="2"/> 
    <property name="lock-screen-suspend-hibernate" type="bool" value="false"/>
    <property name="dpms-enabled" type="bool" value="true"/>
  </property>
</channel>

Help With Applying Passing Parameters

i need to complete this exercise but my code has some issues
HERE is the PRoblem:
Create a script that can accept ANY amount of numbers from the command line. Process the numbers one at a time, where numbers greater than 10 print �large�, numbers less than or equal to 10 print �small�
E.g. process 5 10 15 would print
small
small
large

and here is my code so far
if [ $@ -le "10" ]
then
echo "smaller"
else
echo "bigger"
shift
fi
if [ $@ -le "10" ]
then
echo "smaller"
else
echo "bigger"
shift
fi
if [ $@ -le "10" ]
then
echo "smaller"
else
echo "bigger"
shift
fi
if [ $@ -le "10" ]
then
echo "smaller"
else
echo "bigger"
shift
fi

any help would be greatly appreciated

Rsync Script Problem

Hi all,

I am trying to write a script that syncs files from source to destination. I have one centralized server that can ssh to any servers without pw. Now when I run the script, it can ssh to source server perfectly fine, but you need to enter password for destination server. Was wondering how I can clean this up before I start using case statements

Below is a sample I wrote

#!/bin/bash

#This scripts syncs shit

echo "Type in ID: "
read ID

echo "Type in Server : " #source server
read S

echo "Type in Destination Server: "
read DS

if [ $S == 9 ]; then
ssh -t "root@"$S"webserver1" "rsync -av /home/rlui/"$ID "root@"$DS"webserver2:/home/rlui/";
ssh -t "root@"$S"webserver1" "rsync -av /home/rlui/tmp/"$ID "root@sl"$DS"webserver2:/home/rlui/tmp/"
exit 1

where S and DS are cluster numbers

I apologize in advance if I am not clear on anything

How To Define Variable In `ssh`

Similar Content