ACPI Error At The End Of Boot; How To Delete That Error?

OK,

Lastnight I decided to finally attempt to install the dedicated ATI/AMD Catylist drivers. After all I was successfull with the HP drivers, right...

No matter which grub selection I make, getting in is broken, except of course for the Windows XP Pro x64 entry, that works just fine. I'm here with you today, because of the Fedora 21 Live DVD, (slooooww).

Here is the drivers log file:

==========================================================
Supported adapter detected.
Check if system has the tools required for installation.
Uninstalling any previously installed drivers.
Unloading radeon module...
rmmod: ERROR: Module radeon is in use
Unloading drm module...
rmmod: ERROR: Module drm is in use by: ttm drm_kms_helper radeon
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Message] Kernel Module : Found kernel module build environment, generating kernel module now.
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
rm -rf *.c *.h *.o *.ko *.a .??* *.symvers
make -C /lib/modules/3.18.3-201.fc21.x86_64/build SUBDIRS=/usr/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: Entering directory '/usr/src/kernels/3.18.3-201.fc21.x86_64'
CC [M] /usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
/usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:6396:12: warning: ‘KCL_fpu_save_init’ defined but not used [-Wunused-function]
static int KCL_fpu_save_init(struct task_struct *tsk)
^
CC [M] /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o
/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.c: In function ‘KCL_ACPI_Slot_No_Hotplug’:
/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.c:845:21: error: ‘struct acpi_device_flags’ has no member named ‘no_hotplug’
tdev->flags.no_hotplug = true;
^
scripts/Makefile.build:257: recipe for target '/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o' failed
make[2]: *** [/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o] Error 1
Makefile:1385: recipe for target '_module_/usr/lib/modules/fglrx/build_mod/2.6.x' failed
make[1]: *** [_module_/usr/lib/modules/fglrx/build_mod/2.6.x] Error 2
make[1]: Leaving directory '/usr/src/kernels/3.18.3-201.fc21.x86_64'
Makefile:88: recipe for target 'kmod_build' failed
make: *** [kmod_build] Error 2
build failed with return value 2
[Error] Kernel Module : Failed to compile kernel module - please consult readme.
[Reboot] Kernel Module : dracut
==========================================================

I just rebooted without attempting to configure the card, as per the ATI/AMD warning stating that it's important to do so, because my thinking was derailed due to seeing errors, and the install program said I needed to reboot. Afterall, I just couln't believe that with a "Failed to compile kernel module" error, it would actually keep the changes I'd made, that surely Linux had a failsafe in place for such circumstances. In other words, I'm also a newbie, and just don't know how many hoops of fire one has to jump through to be at peace with linux.

Can anyone please help be get back into my install, I've already set up so many things, there's just got to be a way, right?


Thanks in Advance!


JustAnotherHuman

I have a debian OS on a partition on my hard disk (sda1).
There was no sound because the ati rs880/radeon 4200 sound card needed drivers which were only in the debian 'non-free' version'.
So I added the non-free version to my install and also had to make a change to the GRUB bootloader file.
After that, I got sound.

Now I've installed a new debian distro to my second partition - sda2.
This time I ensured I installed the debian non-free version.
But I'm having trouble installing the drivers for the sound card.

I go into Synaptic package manager to install the relevant drivers and it gives me an error message:
Code:

Configuring libfglrx - install Fglrx driver despite unsupported graphics card?

I'm not sure what that means because I want the drivers for my sound card - not graphics.
When I press the 'Help' button, it says:
Code:

This system has a graphics card which is no longer handled by the Fglrx driver...
The above card requires either the non-free legacy Fgrlx driver 
(package fgrlx-legacy-driver) or the free Radeon driver (package xserver-xorg-video-radeon).

This is fine because I can just install the 'free Radeon driver'.

But the Help message then says:
Code:

Before the Radeon driver can be used you must remove Fglrx configuration from xorg.conf 
(and xorg.conf.d/)
Note that switching to the free Radeon driver requires the fglrx-driver package to be purged (not just removed).

So now I don't know what to do. Has anyone had this error message?
I know I can enable sound and have no problems with the graphics card because that's what happened with my original install on sda1.

But with the install on sda2, I don't know how to approach this problem.
Can anyone help please?

Hello, my video card "Advanced Micro Devices [AMD] nee ATI Cedar PRO [Radeon HD 5450/6350]"
create something which can be seen with dmesg "drm: registered panic notifier".
Should I install the fglrx driver instead of keeping the open source radeon as per current install?
I have antix which is a debian wheezy based system https://wiki.debian.org/ATIProprietary# ... 2Wheezy.22
Thanks for any advice before I do it.

I newly installed the fglrx driver instead the radeon opensource; the video is better but the movement of windows is very slow. Is there a possibility to accelerate that system?
the Xorg.conf has no specific setup.
Any advice is welcome.

Code:

System:    Host: hp7100 Kernel: 3.7.10-antix.7-486-smp i686 (32 bit)
           Desktop: Fluxbox 1.3.2
           Distro: antiX-13.1_386-base Luddite 19 June 2013
Machine:   System: Hewlett-Packard product: HP Compaq dc7100 USDT(DX877AV) serial: HUB5090KPM
           Mobo: Hewlett-Packard model: 0980h serial: HUB5090KPM
           Bios: Hewlett-Packard v: 786C1 v02.15 date: 08/07/2008
CPU:       Single core Intel Pentium 4 (-HT-) cache: 2048 KB 
           clock speeds: max: 3393 MHz 1: 3393 MHz 2: 3393 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI Cedar PRO [Radeon HD 5450/6350]
           Display Server: X.org 1.12.4 driver: fglrx
           tty size: 80x24 Advanced Data: N/A for root
...
Info:      Processes: 94 Uptime: 1 min Memory: 181.9/3040.2MB
           Client: Shell (bash) inxi: 2.2.19

Code:

[    15.986] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    15.986] X Protocol Version 11, Revision 0
[    15.986] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[    15.986] Current Operating System: Linux hp7100 3.7.10-antix.7-486-smp #4 SMP Tue Nov 12 13:37:53 EET 2013 i686
[    15.986] Kernel command line: root=/dev/sda2 quiet nomodeset radeon.modeset=0
[    15.986] Build Date: 09 February 2015  10:12:47AM
[    15.986] xorg-server 2:1.12.4-6+deb7u6 (Julien Cristau <jcristau@debian.org>) 
[    15.986] Current version of pixman: 0.26.0
[    15.986] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    15.986] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.987] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 15 21:58:52 2015
[    16.044] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    16.044] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    16.090] (==) No Layout section.  Using the first Screen section.
[    16.090] (==) No screen section available. Using defaults.
[    16.090] (**) |-->Screen "Default Screen Section" (0)
[    16.090] (**) |   |-->Monitor "<default monitor>"
[    16.104] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    16.104] (**) |   |-->Device "My GPU"
[    16.104] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    16.104] (==) Automatically adding devices
[    16.104] (==) Automatically enabling devices
[    16.401] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
...
[    16.418] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    16.418] 	Entry deleted from font path.
[    16.418] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/100dpi,
	built-ins
[    16.418] (==) ModulePath set to "/usr/lib/xorg/modules"
[    16.418] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    16.434] (II) Loader magic: 0xb77995a0
[    16.434] (II) Module ABI versions:
[    16.434] 	X.Org ANSI C Emulation: 0.4
[    16.434] 	X.Org Video Driver: 12.1
[    16.434] 	X.Org XInput driver : 16.0
[    16.434] 	X.Org Server Extension : 6.0
[    16.435] (--) PCI:*(0:6:0:0) 1002:68f9:1787:2291 rev 0, Mem @ 0xe0000000/268435456, 0xf0600000/131072, I/O @ 0x00001000/256, BIOS @ 0x????????/131072
[    16.435] (II) Open ACPI successful (/var/run/acpid.socket)
[    16.435] (II) LoadModule: "extmod"
[    16.509] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    16.576] (II) Module extmod: vendor="X.Org Foundation"
[    16.576] 	compiled for 1.12.4, module version = 1.0.0
[    16.577] 	Module class: X.Org Server Extension
[    16.577] 	ABI class: X.Org Server Extension, version 6.0
[    16.577] (II) Loading extension SELinux
[    16.577] (II) Loading extension MIT-SCREEN-SAVER
[    16.577] (II) Loading extension XFree86-VidModeExtension
[    16.577] (II) Loading extension XFree86-DGA
[    16.577] (II) Loading extension DPMS
[    16.577] (II) Loading extension XVideo
[    16.577] (II) Loading extension XVideo-MotionCompensation
[    16.577] (II) Loading extension X-Resource
[    16.577] (II) LoadModule: "dbe"
[    16.577] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    16.617] (II) Module dbe: vendor="X.Org Foundation"
[    16.617] 	compiled for 1.12.4, module version = 1.0.0
[    16.617] 	Module class: X.Org Server Extension
[    16.617] 	ABI class: X.Org Server Extension, version 6.0
[    16.617] (II) Loading extension DOUBLE-BUFFER
[    16.617] (II) LoadModule: "glx"
[    16.617] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.732] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    16.732] 	compiled for 6.9.0, module version = 1.0.0
[    16.732] (II) Loading extension GLX
[    16.732] (II) LoadModule: "record"
[    16.733] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    16.757] (II) Module record: vendor="X.Org Foundation"
[    16.757] 	compiled for 1.12.4, module version = 1.13.0
[    16.757] 	Module class: X.Org Server Extension
[    16.757] 	ABI class: X.Org Server Extension, version 6.0
[    16.757] (II) Loading extension RECORD
[    16.757] (II) LoadModule: "dri"
[    16.757] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    16.767] (II) Module dri: vendor="X.Org Foundation"
[    16.767] 	compiled for 1.12.4, module version = 1.0.0
[    16.767] 	ABI class: X.Org Server Extension, version 6.0
[    16.767] (II) Loading extension XFree86-DRI
[    16.767] (II) LoadModule: "dri2"
[    16.767] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    16.776] (II) Module dri2: vendor="X.Org Foundation"
[    16.776] 	compiled for 1.12.4, module version = 1.2.0
[    16.776] 	ABI class: X.Org Server Extension, version 6.0
[    16.776] (II) Loading extension DRI2
[    16.776] (II) LoadModule: "fglrx"
[    16.782] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    18.151] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    18.152] 	compiled for 1.4.99.906, module version = 14.50.2
[    18.152] 	Module class: X.Org Video Driver
[    18.190] (II) Loading sub module "fglrxdrm"
[    18.190] (II) LoadModule: "fglrxdrm"
[    18.190] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    18.310] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    18.310] 	compiled for 1.4.99.906, module version = 14.50.2
[    18.321] (II) AMD Proprietary Linux Driver Version Identifier:14.50.2
[    18.321] (II) AMD Proprietary Linux Driver Release Identifier: 14.501.1003                          
[    18.321] (II) AMD Proprietary Linux Driver Build Date: Nov 20 2014 21:22:53
[    18.321] (++) using VT number 7

[    18.342] (WW) Falling back to old probe method for fglrx
[    18.719] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    18.780] ukiDynamicMajor: found major device number 250
[    18.849] (--) Assigning device section with no busID to primary device
[    18.849] (--) Chipset Supported AMD Graphics Processor (0x68F9) found
[    18.849] (WW) fglrx: No matching Device section for instance (BusID PCI:0@6:0:1) found
[    18.850] (II) fglrx(0): pEnt->device->identifier=0xb8b0c5c8
[    18.850] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[    18.850] (II) fglrx(0): FB driver is not enabled
[    18.850] (II) Loading sub module "vgahw"
[    18.850] (II) LoadModule: "vgahw"
[    18.851] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    18.891] (II) Module vgahw: vendor="X.Org Foundation"
[    18.891] 	compiled for 1.12.4, module version = 0.1.0
[    18.892] 	ABI class: X.Org Video Driver, version 12.1
[    18.892] (II) fglrx(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    18.892] (==) fglrx(0): Depth 24, (==) framebuffer bpp 32
[    18.892] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    18.892] (==) fglrx(0): Default visual is TrueColor
[    18.892] (==) fglrx(0): RGB weight 888
[    18.892] (II) fglrx(0): Using 8 bits per RGB 
[    18.892] (==) fglrx(0): Buffer Tiling is ON
[    18.914] (II) Loading sub module "fglrxdrm"
[    18.914] (II) LoadModule: "fglrxdrm"
[    18.914] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    18.914] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    18.914] 	compiled for 1.4.99.906, module version = 14.50.2
[    18.916] ukiDynamicMajor: found major device number 250
[    18.916] ukiDynamicMajor: found major device number 250
[    18.916] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[    18.916] ukiOpenDevice: node name is /dev/ati/card0
[    18.916] ukiOpenDevice: open result is 11, (OK)
[    20.601] ukiOpenByBusid: ukiOpenMinor returns 11
[    20.601] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[    20.601] (**) fglrx(0): NoAccel = NO
[    20.602] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    20.602] (--) fglrx(0): Chipset: "AMD Radeon HD 5450  " (Chipset = 0x68f9)
[    20.602] (--) fglrx(0): (PciSubVendor = 0x1787, PciSubDevice = 0x2291)
[    20.602] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    20.602] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[    20.602] (--) fglrx(0): MMIO registers at 0xf0600000
[    20.602] (--) fglrx(0): I/O port at 0x00001000
[    20.602] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    20.619] (II) fglrx(0): AC Adapter is used
[    20.639] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    21.044] (II) Loading sub module "vbe"
[    21.044] (II) LoadModule: "vbe"
[    21.044] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    21.059] (II) Module vbe: vendor="X.Org Foundation"
[    21.059] 	compiled for 1.12.4, module version = 1.1.0
[    21.059] 	ABI class: X.Org Video Driver, version 12.1
[    21.084] (II) fglrx(0): VESA BIOS detected
[    21.084] (II) fglrx(0): VESA VBE Version 3.0
[    21.084] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    21.084] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    21.084] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[    21.084] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    21.084] (II) fglrx(0): VESA VBE OEM Product: CEDAR
[    21.084] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    21.084] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    21.085] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR2
[    21.085] (II) fglrx(0): PCIE card detected
[    21.085] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    21.085] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    21.085] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[    21.085] (II) fglrx(0): RandR 1.2 support is enabled!
[    21.085] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    21.085] (II) Loading sub module "fb"
[    21.085] (II) LoadModule: "fb"
[    21.085] (II) Loading /usr/lib/xorg/modules/libfb.so
[    21.099] (II) Module fb: vendor="X.Org Foundation"
[    21.099] 	compiled for 1.12.4, module version = 1.0.0
[    21.099] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    21.099] (II) fglrx(0): EDID Management option: EDID Management is enabled
[    21.099] (II) Loading sub module "ddc"
[    21.099] (II) LoadModule: "ddc"
[    21.099] (II) Module "ddc" already built-in
[    21.526] (II) fglrx(0): Output DFP1 has no monitor section
[    21.527] (II) fglrx(0): Output DFP2 has no monitor section
[    21.527] (II) fglrx(0): Output CRT1 has no monitor section
[    21.527] (II) fglrx(0): Output CRT2 has no monitor section
[    21.527] (II) Loading sub module "ddc"
[    21.527] (II) LoadModule: "ddc"
[    21.527] (II) Module "ddc" already built-in
[    21.527] (II) fglrx(0): Connected Display0: CRT2
[    21.527] (II) fglrx(0): Display0 EDID data ---------------------------
[    21.527] (II) fglrx(0): Manufacturer: SNY  Model: 880  Serial#: 16843009
[    21.527] (II) fglrx(0): Year: 2003  Week: 18
[    21.527] (II) fglrx(0): EDID Version: 1.3
[    21.527] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    21.527] (II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
[    21.527] (II) fglrx(0): Max Image Size [cm]: horiz.: 36  vert.: 29
[    21.527] (II) fglrx(0): Gamma: 2.20
[    21.527] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    21.527] (II) fglrx(0): First detailed timing is preferred mode
[    21.527] (II) fglrx(0): redX: 0.633 redY: 0.340   greenX: 0.295 greenY: 0.603
[    21.527] (II) fglrx(0): blueX: 0.141 blueY: 0.096   whiteX: 0.283 whiteY: 0.298
[    21.527] (II) fglrx(0): Supported established timings:
[    21.527] (II) fglrx(0): 720x400@70Hz
[    21.527] (II) fglrx(0): 640x480@60Hz
[    21.527] (II) fglrx(0): 800x600@60Hz
[    21.527] (II) fglrx(0): 1024x768@60Hz
[    21.527] (II) fglrx(0): Manufacturer's mask: 0
[    21.527] (II) fglrx(0): Supported standard timings:
[    21.527] (II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    21.527] (II) fglrx(0): Supported detailed timing:
[    21.527] (II) fglrx(0): clock: 108.0 MHz   Image Size:  359 x 287 mm
[    21.527] (II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    21.527] (II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    21.527] (II) fglrx(0): Ranges: V min: 57 V max: 63 Hz, H min: 28 H max: 65 kHz, PixClock max 115 MHz
[    21.527] (II) fglrx(0): Monitor name: SDM-P82
[    21.527] (II) fglrx(0): Serial No: 4507930
[    21.527] (II) fglrx(0): EDID (in hex):
[    21.528] (II) fglrx(0): 	00ffffffffffff004dd9800801010101
[    21.528] (II) fglrx(0): 	120d01030e241d78ea0929a2574b9a24
[    21.528] (II) fglrx(0): 	18484ca1080081800101010101010101
[    21.528] (II) fglrx(0): 	010101010101302a009851002a403070
[    21.528] (II) fglrx(0): 	1300671f1100001e000000fd00393f1c
[    21.528] (II) fglrx(0): 	410b000a202020202020000000fc0053
[    21.528] (II) fglrx(0): 	444d2d5038320a2020202020000000ff
[    21.528] (II) fglrx(0): 	00343530373933300a202020202000a6
[    21.528] (II) fglrx(0): End of Display0 EDID data --------------------
[    21.528] (II) fglrx(0): Dynamic Surface Resizing Enabled
[    21.529] (II) fglrx(0): EDID for output DFP1
[    21.529] (II) fglrx(0): EDID for output DFP2
[    21.529] (II) fglrx(0): EDID for output CRT1
[    21.529] (II) fglrx(0): EDID for output CRT2
[    21.529] (II) fglrx(0): Manufacturer: SNY  Model: 880  Serial#: 16843009
[    21.529] (II) fglrx(0): Year: 2003  Week: 18
[    21.529] (II) fglrx(0): EDID Version: 1.3
[    21.529] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    21.529] (II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
[    21.529] (II) fglrx(0): Max Image Size [cm]: horiz.: 36  vert.: 29
[    21.529] (II) fglrx(0): Gamma: 2.20
[    21.529] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    21.529] (II) fglrx(0): First detailed timing is preferred mode
[    21.529] (II) fglrx(0): redX: 0.633 redY: 0.340   greenX: 0.295 greenY: 0.603
[    21.529] (II) fglrx(0): blueX: 0.141 blueY: 0.096   whiteX: 0.283 whiteY: 0.298
[    21.529] (II) fglrx(0): Supported established timings:
[    21.529] (II) fglrx(0): 720x400@70Hz
[    21.529] (II) fglrx(0): 640x480@60Hz
[    21.529] (II) fglrx(0): 800x600@60Hz
[    21.529] (II) fglrx(0): 1024x768@60Hz
[    21.529] (II) fglrx(0): Manufacturer's mask: 0
[    21.529] (II) fglrx(0): Supported standard timings:
[    21.529] (II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    21.529] (II) fglrx(0): Supported detailed timing:
[    21.529] (II) fglrx(0): clock: 108.0 MHz   Image Size:  359 x 287 mm
[    21.529] (II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    21.529] (II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    21.529] (II) fglrx(0): Ranges: V min: 57 V max: 63 Hz, H min: 28 H max: 65 kHz, PixClock max 115 MHz
[    21.529] (II) fglrx(0): Monitor name: SDM-P82
[    21.530] (II) fglrx(0): Serial No: 4507930
[    21.530] (II) fglrx(0): EDID (in hex):
[    21.530] (II) fglrx(0): 	00ffffffffffff004dd9800801010101
[    21.530] (II) fglrx(0): 	120d01030e241d78ea0929a2574b9a24
[    21.530] (II) fglrx(0): 	18484ca1080081800101010101010101
[    21.530] (II) fglrx(0): 	010101010101302a009851002a403070
[    21.530] (II) fglrx(0): 	1300671f1100001e000000fd00393f1c
[    21.530] (II) fglrx(0): 	410b000a202020202020000000fc0053
[    21.530] (II) fglrx(0): 	444d2d5038320a2020202020000000ff
[    21.530] (II) fglrx(0): 	00343530373933300a202020202000a6
[    21.530] (II) fglrx(0): Printing probed modes for output CRT2
[    21.530] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    21.530] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1328 1440 1688  960 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    21.530] (II) fglrx(0): Modeline "1280x768"x60.0  108.00  1280 1328 1440 1688  768 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    21.530] (II) fglrx(0): Modeline "1280x720"x60.0  108.00  1280 1328 1440 1688  720 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    21.530] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    21.530] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    21.530] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    21.530] (II) fglrx(0): Output DFP1 disconnected
[    21.530] (II) fglrx(0): Output DFP2 disconnected
[    21.530] (II) fglrx(0): Output CRT1 disconnected
[    21.530] (II) fglrx(0): Output CRT2 connected
[    21.530] (II) fglrx(0): Using exact sizes for initial modes
[    21.530] (II) fglrx(0): Output CRT2 using initial mode 1280x1024
[    21.530] (II) fglrx(0): DPI set to (96, 96)
[    21.530] (II) fglrx(0): Eyefinity capable adapter detected.
[    21.530] (II) fglrx(0): Adapter AMD Radeon HD 5450   has 3 configurable heads and 1 displays connected.
[    21.530] (==) fglrx(0):  PseudoColor visuals disabled
[    21.531] (II) Loading sub module "ramdac"
[    21.531] (II) LoadModule: "ramdac"
[    21.531] (II) Module "ramdac" already built-in
[    21.531] (==) fglrx(0): NoDRI = NO
[    21.531] (==) fglrx(0): Capabilities: 0x00000000
[    21.531] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    21.531] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    21.531] (==) fglrx(0): UseFastTLS=0
[    21.531] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[    21.531] (--) Depth 24 pixmap format is 32 bpp
[    21.531] (II) Loading extension ATIFGLRXDRI
[    21.531] (II) fglrx(0): doing swlDriScreenInit
[    21.531] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    21.531] ukiDynamicMajor: found major device number 250
[    21.531] ukiDynamicMajor: found major device number 250
[    21.531] ukiDynamicMajor: found major device number 250
[    21.532] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[    21.532] ukiOpenDevice: node name is /dev/ati/card0
[    21.532] ukiOpenDevice: open result is 12, (OK)
[    21.532] ukiOpenByBusid: ukiOpenMinor returns 12
[    21.532] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[    21.532] (II) fglrx(0): [uki] DRM interface version 1.0
[    21.532] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:6:0:0"
[    21.532] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    21.532] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb7580000
[    21.532] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    21.532] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    21.532] (II) fglrx(0): swlDriScreenInit done
[    21.532] (II) fglrx(0): Kernel Module Version Information:
[    21.532] (II) fglrx(0):     Name: fglrx
[    21.532] (II) fglrx(0):     Version: 14.50.2
[    21.532] (II) fglrx(0):     Date: Nov 20 2014
[    21.532] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[    21.532] (II) fglrx(0): Kernel Module version matches driver.
[    21.532] (II) fglrx(0): Kernel Module Build Time Information:
[    21.532] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.7.10-antix.7-486-smp
[    21.532] (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
[    21.532] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[    21.532] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    21.532] (II) fglrx(0): [uki] register handle = 0x00004000
[    21.593] (II) fglrx(0): DRI initialization successfull
[    21.630] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01040000
[    21.641] (==) fglrx(0): Backing store disabled
[    21.641] (II) Loading extension FGLRXEXTENSION
[    21.641] (==) fglrx(0): DPMS enabled
[    21.642] (II) fglrx(0): Initialized in-driver Xinerama extension
[    21.642] (**) fglrx(0): Textured Video is enabled.
[    21.642] (II) LoadModule: "glesx"
[    21.643] (II) Loading /usr/lib/xorg/modules/glesx.so
[    22.274] (II) Module glesx: vendor="X.Org Foundation"
[    22.274] 	compiled for 1.4.99.906, module version = 1.0.0
[    22.282] (II) Loading extension GLESX
[    22.282] (II) fglrx(0): GLESX enableFlags = 8784
[    22.294] (II) fglrx(0): GLESX is enabled
[    22.294] (II) LoadModule: "amdxmm"
[    22.294] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    22.321] (II) Module amdxmm: vendor="X.Org Foundation"
[    22.321] 	compiled for 1.4.99.906, module version = 2.0.0
[    22.335] (II) Loading extension AMDXVOPL
[    22.335] (II) Loading extension AMDXVBA
[    22.356] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[    22.359] (II) fglrx(0): Enable composite support successfully
[    22.359] (II) fglrx(0): X context handle = 0x1
[    22.359] (II) fglrx(0): [DRI] installation complete
[    22.359] (==) fglrx(0): Silken mouse enabled
[    22.360] (==) fglrx(0): Using HW cursor of display infrastructure!
[    22.361] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    22.606] (--) RandR disabled
[    22.606] (II) Initializing built-in extension Generic Event Extension
[    22.606] (II) Initializing built-in extension SHAPE
[    22.606] (II) Initializing built-in extension MIT-SHM
[    22.606] (II) Initializing built-in extension XInputExtension
[    22.606] (II) Initializing built-in extension XTEST
[    22.606] (II) Initializing built-in extension BIG-REQUESTS
[    22.606] (II) Initializing built-in extension SYNC
[    22.606] (II) Initializing built-in extension XKEYBOARD
[    22.606] (II) Initializing built-in extension XC-MISC
[    22.606] (II) Initializing built-in extension SECURITY
[    22.606] (II) Initializing built-in extension XINERAMA
[    22.606] (II) Initializing built-in extension XFIXES
[    22.606] (II) Initializing built-in extension RENDER
[    22.606] (II) Initializing built-in extension RANDR
[    22.606] (II) Initializing built-in extension COMPOSITE
[    22.606] (II) Initializing built-in extension DAMAGE
[    22.606] (II) SELinux: Disabled on system
[    22.611] ukiDynamicMajor: found major device number 250
[    22.611] ukiDynamicMajor: found major device number 250
[    22.611] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[    22.611] ukiOpenDevice: node name is /dev/ati/card0
[    22.611] ukiOpenDevice: open result is 13, (OK)
[    22.611] ukiOpenByBusid: ukiOpenMinor returns 13
[    22.611] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[    24.648] ukiDynamicMajor: found major device number 250
[    24.648] ukiDynamicMajor: found major device number 250
[    24.648] ukiDynamicMajor: found major device number 250
[    24.648] ukiOpenDevice: node name is /dev/ati/card0
[    24.648] ukiOpenDevice: open result is 14, (OK)
[    24.648] ukiGetBusid returned 'PCI:6:0:0'
[    24.648] ukiOpenDevice: node name is /dev/ati/card1
[    24.648] ukiOpenDevice: open result is -1, (No such device)
[    24.648] ukiOpenDevice: open result is -1, (No such device)
...
[    24.650] ukiOpenDevice: node name is /dev/ati/card15
[    24.650] ukiOpenDevice: open result is -1, (No such device)
[    24.650] ukiOpenDevice: open result is -1, (No such device)
[    24.650] ukiOpenDevice: Open failed
[    24.650] ukiDynamicMajor: found major device number 250
[    24.650] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[    24.650] ukiOpenDevice: node name is /dev/ati/card0
[    24.650] ukiOpenDevice: open result is 14, (OK)
[    24.650] ukiOpenByBusid: ukiOpenMinor returns 14
[    24.650] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[    24.704] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    24.707] ukiDynamicMajor: found major device number 250
[    24.707] ukiDynamicMajor: found major device number 250
[    24.707] ukiDynamicMajor: found major device number 250
[    24.707] ukiOpenDevice: node name is /dev/ati/card0
[    24.707] ukiOpenDevice: open result is 15, (OK)
[    24.707] ukiGetBusid returned 'PCI:6:0:0'
[    24.707] ukiOpenDevice: node name is /dev/ati/card1
[    24.707] ukiOpenDevice: open result is -1, (No such device)
[    24.707] ukiOpenDevice: open result is -1, (No such device)
[    24.707] ukiOpenDevice: Open failed
[    24.707] ukiOpenDevice: node name is /dev/ati/card2
[    24.707] ukiOpenDevice: open result is -1, (No such device)
[    24.707] ukiOpenDevice: open result is -1, (No such device)
...
[    24.709] ukiOpenDevice: node name is /dev/ati/card15
[    24.709] ukiOpenDevice: open result is -1, (No such device)
[    24.709] ukiOpenDevice: open result is -1, (No such device)
[    24.709] ukiOpenDevice: Open failed
[    24.709] ukiDynamicMajor: found major device number 250
[    24.709] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[    24.709] ukiOpenDevice: node name is /dev/ati/card0
[    24.709] ukiOpenDevice: open result is 15, (OK)
[    24.709] ukiOpenByBusid: ukiOpenMinor returns 15
[    24.709] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[    24.996] (II) fglrx(0): OverDrive5 Detected!
[    25.008] (II) fglrx(0): Setting screen physical size to 338 x 270
[    25.430] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    25.431] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.431] (II) LoadModule: "evdev"
[    25.431] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
...
[    25.508] (II) This device may have been added with another device file.
[    25.515] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments

Just did an update via terminal:

Calculating upgrade... Done
The following packages were automatically installed and are no longer required:
linux-headers-3.13.0-49 linux-headers-3.13.0-49-generic
linux-image-3.13.0-49-generic linux-image-extra-3.13.0-49-generic
Use 'apt-get autoremove' to remove them.
The following NEW packages will be installed:
fglrx-core linux-headers-3.13.0-53 linux-headers-3.13.0-53-generic
linux-image-3.13.0-53-generic linux-image-extra-3.13.0-53-generic
The following packages will be upgraded:
accountsservice apport apport-gtk fglrx fglrx-amdcccle fuse
libaccountsservice0 libfuse2 liboxideqt-qmlplugin liboxideqtcore0
liboxideqtquick0 libspice-server1 linux-firmware linux-headers-generic
linux-image-generic linux-libc-dev oxideqt-codecs-extra python3-apport
python3-problem-report
19 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
Need to get 227 MB of archives.
After this operation, 490 MB of additional disk space will be used.
Do you want to continue? [Y/n] Y

It downloaded and unpacked files, everything was automated until it asked for my input before replacing the following files:
I backed them up then chose to replace them:

DKMS: install completed.
update-initramfs: deferring update (trigger activated)
Setting up fglrx (2:15.200-0ubuntu0.3) ...

Configuration file '/etc/ati/amdpcsdb.default'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options a
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** amdpcsdb.default (Y/I/N/O/D/Z) [default=N] ? Y
Installing new version of config file /etc/ati/amdpcsdb.default ...

Configuration file '/etc/ati/atiapfxx'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options a
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** atiapfxx (Y/I/N/O/D/Z) [default=N] ? Y
Installing new version of config file /etc/ati/atiapfxx ...

Configuration file '/etc/ati/control'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options a
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** control (Y/I/N/O/D/Z) [default=N] ? ^[Y

Configuration file '/etc/ati/control'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options a
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** control (Y/I/N/O/D/Z) [default=N] ? Y
Installing new version of config file /etc/ati/control ...

Configuration file '/etc/ati/signature'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options a
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** signature (Y/I/N/O/D/Z) [default=N] ? Y
Installing new version of config file /etc/ati/signature ...

Configuration file '/etc/ati/atiapfxx.log'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options a
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** atiapfxx.log (Y/I/N/O/D/Z) [default=N] ? Y
Installing new version of config file /etc/ati/atiapfxx.log ...

Configuration file '/etc/ati/atiapfxx.blb'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options a
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** atiapfxx.blb (Y/I/N/O/D/Z) [default=N] ? Y
Installing new version of config file /etc/ati/atiapfxx.blb ...
Creating backups for the fglrx-core transition
update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group x86_64-linux-gnu_gl_conf is broken
Restoring backups for the fglrx-core transition
Setting up fglrx-amdcccle (2:15.200-0ubuntu0.3) ...
Setting up linux-firmware (1.127.12) ...
Setting up linux-headers-3.13.0-53 (3.13.0-53.89) ...
Setting up linux-headers-3.13.0-53-generic (3.13.0-53.89) ...
Examining /etc/kernel/header_postinst.d.
run-parts: executing /etc/kernel/header_postinst.d/dkms 3.13.0-53-generic /boot/vmlinuz-3.13.0-53-generic

Good news! Module version for fglrx.ko
exactly matches what is already found in kernel 3.13.0-53-generic.
DKMS will not replace this module.
You may override by specifying --force.
Setting up linux-headers-generic (3.13.0.53.60) ...
Setting up linux-image-extra-3.13.0-53-generic (3.13.0-53.89) ...
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 3.13.0-53-generic /boot/vmlinuz-3.13.0-53-generic
run-parts: executing /etc/kernel/postinst.d/dkms 3.13.0-53-generic /boot/vmlinuz-3.13.0-53-generic
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.13.0-53-generic /boot/vmlinuz-3.13.0-53-generic
update-initramfs: Generating /boot/initrd.img-3.13.0-53-generic
run-parts: executing /etc/kernel/postinst.d/pm-utils 3.13.0-53-generic /boot/vmlinuz-3.13.0-53-generic
run-parts: executing /etc/kernel/postinst.d/update-notifier 3.13.0-53-generic /boot/vmlinuz-3.13.0-53-generic
run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.13.0-53-generic /boot/vmlinuz-3.13.0-53-generic
Generating grub configuration file ...
Found theme: /boot/grub/themes/Zorin/theme.txt
Found linux image: /boot/vmlinuz-3.13.0-53-generic
Found initrd image: /boot/initrd.img-3.13.0-53-generic
Found linux image: /boot/vmlinuz-3.13.0-52-generic
Found initrd image: /boot/initrd.img-3.13.0-52-generic
Found linux image: /boot/vmlinuz-3.13.0-51-generic
Found initrd image: /boot/initrd.img-3.13.0-51-generic
Found linux image: /boot/vmlinuz-3.13.0-49-generic
Found initrd image: /boot/initrd.img-3.13.0-49-generic
Found linux image: /boot/vmlinuz-3.13.0-48-generic
Found initrd image: /boot/initrd.img-3.13.0-48-generic
Found linux image: /boot/vmlinuz-3.13.0-46-generic
Found initrd image: /boot/initrd.img-3.13.0-46-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
No volume groups found
Found Windows XP Professional x64 Edition on /dev/sda1
done
Setting up linux-image-generic (3.13.0.53.60) ...
Setting up oxideqt-codecs-extra:amd64 (1.7.8-0ubuntu0.14.04.1) ...
Setting up liboxideqtcore0:amd64 (1.7.8-0ubuntu0.14.04.1) ...
Setting up liboxideqtquick0:amd64 (1.7.8-0ubuntu0.14.04.1) ...
Setting up liboxideqt-qmlplugin:amd64 (1.7.8-0ubuntu0.14.04.1) ...
Processing triggers for libc-bin (2.19-0ubuntu6.6) ...
Processing triggers for initramfs-tools (0.103ubuntu4.2) ...
update-initramfs: Generating /boot/initrd.img-3.13.0-53-generic
W: Operation was interrupted before it could finish

Finally the error in red immediately above pops up.
I searched the net and found a site with an article dated back in 2010 that said to fix the error before rebooting or I'd probably not be able to boot to Linux.
Which I'm doing right now, I've not yet rebooted.

How should I recover from such an error before I reboot.

The site had several solutions depending upon other variables, one of which was to delete and/or re-run something. But none of the solutions seemed to fit my case.

I'm running the Zorin OS 9 Theme on top of Ubuntu 14.04 LTS, an AMD PhenomII 64bit 4 core processor on an ASUS MB. The video card is also an AMD/ATI, hence the need for the fglrx drivers listed above.

I'm not sure if the overwriting of the ATI/AMD driver config files shown above are responsible for the error or not. I did nothing that I was aware of that might have caused it, except close another instance of terminal that was runnning, and a libre office writer window.

Any ideas on how to solve this before I reboot would be greatly appreciated.

TIA

I have a laptop with an integrated GMA3600 GPU. Every "modern" distro was unusable because the screen would flicker and black out like crazy, so I installed one of the few that didn't present this behaviour -- Crunchbang 11, based on Wheezy.

I'm trying to address this issue; I'll compare a few outputs from 1) my current setup (Crunchbang) and 2) one of the non-working alternatives (Lubuntu 14.10 on a live USB):

uname -r
1) 3.2.0-4-686-pae
2) 3.16.0-23-generic

sudo lshw -c video
1)
Code:

description: VGA compatible controller
       product: Atom Processor D2xxx/N2xxx Integrated Graphics Controller
       vendor: Intel Corporation
       physical id: 2
       bus info: pci@0000:00:02.0
       version: 0b
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi vga_controller bus_master cap_list rom
       configuration: driver=gma500 latency=0
       resources: irq:46 memory:80100000-801fffff ioport:30c0(size=8)

2)
Code:

*-display               
       description: VGA compatible controller
       product: Atom Processor D2xxx/N2xxx Integrated Graphics Controller
       vendor: Intel Corporation
       physical id: 2
       bus info: pci@0000:00:02.0
       version: 0b
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi vga_controller bus_master cap_list rom
       configuration: driver=gma500 latency=0
       resources: irq:45 memory:80100000-801fffff ioport:30c0(size=8)

The only difference is the IRQ used.

cat /proc/interrupts
1)
Code:

           CPU0       CPU1       
  0:         41          0   IO-APIC-edge      timer
  1:        517          0   IO-APIC-edge      i8042
  8:          1          0   IO-APIC-edge      rtc0
  9:       7245          0   IO-APIC-fasteoi   acpi
 12:       2597          0   IO-APIC-edge      i8042
 16:          0          0   IO-APIC-fasteoi   uhci_hcd:usb5
 18:          0          0   IO-APIC-fasteoi   uhci_hcd:usb4
 19:      13520          0   IO-APIC-fasteoi   ata_piix, uhci_hcd:usb3
 23:      26138          0   IO-APIC-fasteoi   ehci_hcd:usb1, uhci_hcd:usb2
 44:        369          0   PCI-MSI-edge      eth0
 45:        255          0   PCI-MSI-edge      snd_hda_intel
NMI:         69         47   Non-maskable interrupts
LOC:      27594      20371   Local timer interrupts
SPU:          0          0   Spurious interrupts
PMI:         69         47   Performance monitoring interrupts
IWI:          0          0   IRQ work interrupts
RES:      33502      39919   Rescheduling interrupts
CAL:        407       6719   Function call interrupts
TLB:       1138       1213   TLB shootdowns
TRM:          0          0   Thermal event interrupts
THR:          0          0   Threshold APIC interrupts
MCE:          0          0   Machine check exceptions
MCP:          1          1   Machine check polls
ERR:          0
MIS:          0

2)
Code:

           CPU0       CPU1       
  0:         46          0   IO-APIC-edge      timer
  1:       2154          0   IO-APIC-edge      i8042
  8:          1          0   IO-APIC-edge      rtc0
  9:      37131          0   IO-APIC-fasteoi   acpi
 12:      11292          0   IO-APIC-edge      i8042
 16:          0          0   IO-APIC-fasteoi   uhci_hcd:usb5
 18:          0          0   IO-APIC-fasteoi   uhci_hcd:usb4
 19:       1309         11   IO-APIC-fasteoi   ata_piix, uhci_hcd:usb3
 23:      20420       6875   IO-APIC-fasteoi   ehci_hcd:usb1, uhci_hcd:usb2
 44:      15634          0   PCI-MSI-edge      eth0
 45:          0          0   PCI-MSI-edge      gma500
 46:        194          0   PCI-MSI-edge      snd_hda_intel
NMI:        147        132   Non-maskable interrupts
LOC:      70348      59679   Local timer interrupts
SPU:          0          0   Spurious interrupts
PMI:        147        132   Performance monitoring interrupts
IWI:          1          0   IRQ work interrupts
RTR:          0          0   APIC ICR read retries
RES:      20827      27012   Rescheduling interrupts
CAL:       1802       2767   Function call interrupts
TLB:       1875       1439   TLB shootdowns
TRM:          0          0   Thermal event interrupts
THR:          0          0   Threshold APIC interrupts
MCE:          0          0   Machine check exceptions
MCP:          4          4   Machine check polls
THR:          0          0   Hypervisor callback interrupts
ERR:          0
MIS:          0

dmesg | grep -i video
1)
Code:

[    0.378029] pci 0000:00:02.0: Boot video device
[    6.579368] Linux video capture interface: v2.00
[    6.614256] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (090c:037c)
[    6.616059] usbco  registered new interface driver uvcvideo
[    6.616064] USB Video Class driver (1.1.1)

2)
Code:

[    0.338661] pci 0000:00:02.0: Boot video device
[   11.048529] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   11.049314] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[   36.372066] Linux video capture interface: v2.00
[   36.908529] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (090c:037c)
[   36.961726] usbco  registered new interface driver uvcvideo
[   36.961733] USB Video Class driver (1.1.1)
[   38.262977] systemd-logind[1547]: Watching system buttons on /dev/input/event5 (Video Bus)

dmesg | grep -i gma
1)
Code:

[    5.465696] gma500 0000:00:02.0: setting latency timer to 64
[    5.465749] gma500 0000:00:02.0: irq 46 for MSI/MSI-X
[    5.466125] gma500 0000:00:02.0: GPU: power management timed out.
[    5.958548] gma500 0000:00:02.0: allocated 1280x800 fb
[    6.402676] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0

2)
Code:

[   11.030830] gma500 0000:00:02.0: irq 45 for MSI/MSI-X
[   11.030934] gma500 0000:00:02.0: GPU: power management timed out.
[   11.420011] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 0
[   11.420060] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 0
[   12.016034] gma500 0000:00:02.0: fb0: psbdrmfb frame buffer device
[   12.016039] gma500 0000:00:02.0: registered panic notifier
[   12.045847] [drm] Initialized gma500 1.0.0 20140314 for 0000:00:02.0 on minor 0

The last output hints that some problem is indeed detected but I don't know what to do from here.

EDIT: forgot to mention that the Lubuntu boot menu screen (this one) presents no flickering issues.

Hi LQ,
I am currently experiencing an issue on a fresh install of Mint 17.1 Cinnamon in which I am permanently stuck in fallback mode (that is, unless I hard shutdown or reboot) on an aging laptop with AMD Radeon HD 4200 graphics (considered legacy). I believe this issue was caused by a failed install of AMD's latest linux graphics drivers, in which I literally opened the .run file and attempted to install. The install failed (some error), of course, but when I rebooted, I was kicked into fallback. After some googling, I autoremoved fglrx then installed fglrx, as I read would reinstall fglrx, the proprietary drivers for AMD cards and rebooted. Still stuck in fallback. I removed and installed Xorg and rebooted. Still stuck in fallback. I downloaded the AMD legacy drivers from AMD's site (my card's series included with this set). Had to change the permissions to run this .run file but eventually ran it from terminal, but this install also failed (claimed I was missing tool(s), despite not indicating precisely what I was missing). I'm still rummaging around for fixes, but maybe asking can help. I can provide some more info below, but let me know what else you need (and how to get it) if you wish to help. I really want linux to work out for me instead of shelling out $$ for Windows, but so far this has been a rocky start. Thanks


Code:

inxi -G

yields
Code:

Graphics:   Card: AMD RS880M [Mobility Radeon HD 4225/4250]
X.Org: 1.15.1
drivers: fbdev,ati,radeon (unloaded: fglrx,vesa)
Resolution: 1024x768@76hz
GLX Renderer: N/A
GLX Version: N/A

Code:

lshw -C video

yields
Code:

*-display UNCLAIMED
description: VGA compatible controller
product: RS880M [Mobility Radeon HD 4225/4250]
vendor: AMD
physical id: 5
...(bunch of stuff on specs)

Have also did apt-get update and apt-get dist-upgrade.
Still no luck, let me know what you think.

Hi.


I'm using smstools3 and Sony Ericsson Phones to send SMS. My system did work well with 4 phones, now I want to connect 20.
The issue is that each phone generates two ttyACMXX devices using cdc_acm driver, and for limitations the driver supports up to 32 ACM devices

Code:

Aug 31 09:51:19 smsgw kernel: cdc_acm 2-2:1.1: ttyACM31: USB ACM device
Aug 31 09:51:19 smsgw kernel: cdc_acm 2-2:1.3: ttyACM32: USB ACM device
Aug 31 09:51:19 smsgw kernel: usbco  registered new driver cdc_acm
Aug 31 09:51:19 smsgw kernel: drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
Aug 31 09:51:19 smsgw kernel: usbco  registered new driver cdc_ether
Aug 31 09:51:19 smsgw kernel: usb 2-2: unsupported MDLM descriptors
Aug 31 09:52:01 smsgw kernel: cdc_acm 3-1:1.0: no more free acm devices

From the ttyACM devices created by the driver I only use the first one..

So I was wondering if it is possible to remove a ttyACM from /sys/class/tty/ttyACM1

I tried unlink /dev/ttyACM1, but it persist as a device on /sys/class/tty/

The devices are removed if I disconnect the phone, So I think would be possible also that the driver only create one ttyACM device..

Please guide me...

Thanks in advance.

I install fgrlx driver on vivid os the driver look like is istalled correct on system and built the necessary kernel modules because the dpkg log not report any errors, i configured the driver by simple commands like:

sudo aticonfig --initial

sudo aticonfig --screen-layout=on

i reboot the machine , but i face an strange issue the boot splash screen is hangup,i cant enter my lvm password to boot the system, i was have a chance to boot into rescue mode when boot to rescue mode the display not read by the system i try to export display by

export DISPLAY=:0

I try to configure /etc/X11/xorg.conf there is not good resaults the boot splash still hang up

I edited the grub , i uncomment "quiet splash" modified by "nomodeset"

i can boot without boot splash but im faced other issue i cant switch to virtual tty

i dont know is this a bug in the driver or in the kernel

any suggest

I'm using a Western Digital My Book Live DUO network drive with 2x2Tb HD's in RAID 1 configuration. The devices uses Linux GNU to manage the RAID array.
At some point after a reboot the UI returns this error:

"Data volume failed to mount Contact tech support"

I have very little linux knowledge, and trying to get the RAID error fixed so I can access and backup my data on another drive.

Here's the info I have managed to pull so far from the drive via SSH:


dmesg

Code:

login as: root
root@192.168.1.55's password:
Linux LTFileServer 2.6.32.11-svn70860 #1 Thu May 17 13:32:51 PDT 2012 ppc
Disclaimer: SSH provides access to the network device and all its
content, only users with advanced computer networking and Linux experience
should enable it. Failure to understand the Linux command line interface
can result in rendering your network device inoperable, as well as allowing
unauthorized users access to your network. If you enable SSH, do not share
the root password with anyone you do not want to have direct access to all
the content on your network device.

LTFileServer:~# dmesg
4bffd1800.sata: DMA CFG = 0x00000001
dma_register_interrupt register irq (25)
irq: irq 27 on host /interrupt-controller0 mapped to virtual irq 27
ata4294967295: sata_dwc_port_start: setting burst size in DBTSR: 0x00100010
sata-dwc 4bffd1800.sata: **** GEN II speed rate negotiated
scsi1 : sata-dwc
ata2: SATA max UDMA/133 irq 27
Found: SST 39LF040
4fff80000.nor_flash: Found 1 x8 devices at 0x0 in 8-bit bank
number of JEDEC chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
RedBoot partition parsing not available
Creating 2 MTD partitions on "4fff80000.nor_flash":
0x000000000000-0x000000020000 : "3genv"
0x000000020000-0x000000080000 : "u-boot"
ndfc 4fff80000.ndfc: failed to get memory
ndfc: probe of 4fff80000.ndfc failed with error -5
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
PPC 4xx OCP EMAC driver, version 3.54
mal0: descriptor-memory = ocm
irq: irq 6 on host /interrupt-controller2 mapped to virtual irq 24
irq: irq 7 on host /interrupt-controller2 mapped to virtual irq 29
irq: irq 3 on host /interrupt-controller2 mapped to virtual irq 31
irq: irq 4 on host /interrupt-controller2 mapped to virtual irq 32
irq: irq 5 on host /interrupt-controller2 mapped to virtual irq 33
irq: irq 8 on host /interrupt-controller2 mapped to virtual irq 34
irq: irq 12 on host /interrupt-controller2 mapped to virtual irq 35
MAL: Enabled Interrupt Coal TxCnt: 1 RxCnt: 8
                            TxTimer: 0 RxTimer: 10000
MAL v2 /plb/mcmal, 1 TX channels, 1 RX channels
RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support
TAH /plb/opb/emac-tah@ef601350 initialized
irq: irq 16 on host /interrupt-controller2 mapped to virtual irq 36
irq: irq 20 on host /interrupt-controller2 mapped to virtual irq 37
/plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
bcm54610_init: before 0x2c8c, after 0x2c8c
bcm54610_init: before 0x0d41, 0x0200; after 0x0d41, 0x0200
eth0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 00:90:a9:b7:10:66
eth0: found BCM54610 Gigabit Ethernet PHY (0x01)
Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
Copyright (c) 2007-2009 Intel Corporation.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Fusion MPT base driver 3.04.12
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SAS Host driver 3.04.12
input: rst_button as /devices/virtual/input/input0
i2c /dev entries driver
irq: irq 2 on host /interrupt-controller0 mapped to virtual irq 38
ibm-iic 4ef600700.i2c: using standard (100 kHz) mode
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
Registered led device: a3g_led
irq: irq 20 on host /interrupt-controller0 mapped to virtual irq 39
AMCC 4xx PKA v0.1 @0x04_00114000 size 16384 IRQ 39
Initializing PKA...
PKA Driver Successfully Initialized
Reading pvr value = 12c41c82
irq: irq 29 on host /interrupt-controller0 mapped to virtual irq 40
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F0300)
Interrupt status = 0x00042020
dev status = 0x03087722
Interrupt status = 0x00042020
dev status = 0x03087722
apm82181-adma: Probing AMCC APM82181 ADMA engines...
ata2.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 1/32)
irq: irq 13 on host /interrupt-controller0 mapped to virtual irq 41
AMCC(R) APM82181 ADMA Engine found [1]: ( capabilities: memcpy )
--------------- dma_async_device_register: 683-------------------------
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F0300)
apm82181 adma1: allocated 512 descriptor slots
irq: irq 14 on host /interrupt-controller0 mapped to virtual irq 42
AMCC(R) APM82181 ADMA Engine found [2]: ( capabilities: memcpy )
--------------- dma_async_device_register: 683-------------------------
ata1.00: ATA-8: WDC WD20EARX-00PASB0, 27.0CR.7, max UDMA/133
ata1.00: 3907209168 sectors, multi 0: LBA48
ata2.00: configured for UDMA/133
apm82181 adma2: allocated 512 descriptor slots
irq: irq 15 on host /interrupt-controller0 mapped to virtual irq 43
AMCC(R) APM82181 ADMA Engine found [3]: ( capabilities: memcpy )
--------------- dma_async_device_register: 683-------------------------
apm82181 adma3: allocated 512 descriptor slots
oprofile: using timer interrupt.
Macsec proc interface Initiliazed
Registered Macsec Interface
IPv4 over IPv4 tunneling driver
ata1.00: configured for UDMA/133
blk_queue_max_hw_segments: set to minimum 1
scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EARX-00P 27.0 PQ: 0 ANSI: 5
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
sd 0:0:0:0: [sda] 3907209168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
blk_queue_max_hw_segments: set to minimum 1
scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg1 type 0
 sda:
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
 sdb: sdb1 sdb2 sdb3 sdb4
 sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] Attached SCSI disk
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: invalid raid superblock magic on sdb3
md: sdb3 does not have a valid v0.90 superblock, not importing!
md: invalid raid superblock magic on sdb4
md: sdb4 does not have a valid v0.90 superblock, not importing!
md: invalid raid superblock magic on sda3
md: sda3 does not have a valid v0.90 superblock, not importing!
md: invalid raid superblock magic on sda4
md: sda4 does not have a valid v0.90 superblock, not importing!
md: Scanned 8 and added 4 devices.
md: autorun ...
md: considering sda2 ...
md:  adding sda2 ...
md:  adding sda1 ...
md:  adding sdb2 ...
md:  adding sdb1 ...
md: created md0
md: bind<sdb1>
md: bind<sdb2>
md: bind<sda1>
md: bind<sda2>
md: running: <sda2><sda1><sdb2><sdb1>
md0: WARNING: sda2 appears to be on the same physical disk as sda1.
md0: WARNING: sdb2 appears to be on the same physical disk as sdb1.
True protection against single-disk failure might be compromised.
raid1: raid set md0 active with 4 out of 4 mirrors
md0: detected capacity change from 0 to 2047803392
md: ... autorun DONE.
 md0: unknown partition table
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) on device 9:0.
Freeing unused kernel memory: 448k init
Disable EMAC EMI Fix
eth0: link is up, 1000 FDX, pause enabled
eth0: no IPv6 routers present
md: md2 stopped.
md: bind<sdb3>
md: bind<sda3>
raid1: raid set md2 active with 2 out of 2 mirrors
md2: detected capacity change from 0 to 512741376
md: md3 stopped.
md: bind<sdb4>
md: bind<sda4>
raid1: raid set md3 active with 1 out of 2 mirrors
md3: detected capacity change from 0 to 1995774484480
md: recovery of RAID array md3
md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
md: using 2048k window, over a total of 1948998520 blocks.
md: resuming recovery of md3 from checkpoint.
 md3: unknown partition table
FAT: invalid media value (0x00)
VFS: Can't find a valid FAT filesystem on dev md3.
 md2: unknown partition table
Adding 500544k swap on /dev/md2.  Priority:-1 extents:1 across:500544k
ufsd: bad vermagic: kernel tainted.
Disabling lock debugging due to kernel taint
ufsd: module license 'unspecified' taints kernel.
ufsd: driver 8.5 (NTFS4LINUX_U85_014_S[2011-09-15-11:41:06]) LBD=ON with delayalloc with ioctl loaded at d4490000
NTFS read/write support included
Big endian platform
Hfs+/HfsX read/write support included
Built_for__WD_APM_82181_2011-08-09_sec

svc: failed to register lockdv1 RPC service (errno 97).
md: cannot remove active disk sda1 from md0 ...
md: cannot remove active disk sda2 from md0 ...
md: cannot remove active disk sdb1 from md0 ...
md: cannot remove active disk sdb2 from md0 ...
Calling led_set_blink with value x
usbco  registered new interface driver usbfs
usbco  registered new interface driver hub
usbco  registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
dwc_otg: version 2.60a 22-NOV-2006
dwc_otg: Shared Tx FIFO mode
dwc_otg: Using DMA mode
dwc_otg dwc_otg.0: DWC OTG Controller
dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
dwc_otg dwc_otg.0: irq 28, io mem 0x00000000
dwc_otg: Init: Port Power? op_state=1
dwc_otg: Init: Power Port (0)
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: DWC OTG Controller
usb usb1: Manufacturer: Linux 2.6.32.11-svn70860 dwc_otg_hcd
usb usb1: SerialNumber: dwc_otg.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Calling led_set_blink with value x
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
Calling led_set_blink with value x
Calling led_set_blink with value x
Calling led_set_blink with value x
Calling led_set_blink with value x
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
Calling led_set_blink with value x
Calling led_set_blink with value x
Calling led_set_blink with value x
Calling led_set_blink with value x
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
Calling led_set_blink with value x
md: md3: recovery done.
RAID1 conf printout:
 --- wd:2 rd:2
 disk 0, wo:0, o:1, dev:sda4
 disk 1, wo:0, o:1, dev:sdb4
Calling led_set_blink with value x
Calling led_set_blink with value x
Calling led_set_blink with value x
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
Calling led_set_blink with value x
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
Calling led_set_blink with value x
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
Calling led_set_blink with value x
usb 1-1: new high speed USB device using dwc_otg and address 2
usb 1-1: New USB device found, idVendor=0781, idProduct=5581
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Ultra
usb 1-1: Manufacturer: SanDisk
usb 1-1: SerialNumber: 4C530123091014123423
usb 1-1: configuration #1 chosen from 1 choice
usbco  registered new interface driver libusual
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbco  registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 2:0:0:0: Direct-Access     SanDisk  Ultra            1.00 PQ: 0 ANSI: 6
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 62566488 512-byte logical blocks: (32.0 GB/29.8 GiB)
usb-storage: device scan complete
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdc] Attached SCSI removable disk
Calling led_set_blink with value x
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
Calling led_set_blink with value x
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
Calling led_set_blink with value x
Calling led_set_blink with value x
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
Calling led_set_blink with value x
Calling led_set_blink with value x
Calling led_set_blink with value x
Calling led_set_blink with value x
Calling led_set_blink with value x
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
md: cannot remove active disk sda1 from md0 ...
md: cannot remove active disk sda2 from md0 ...
md: cannot remove active disk sdb1 from md0 ...
md: cannot remove active disk sdb2 from md0 ...
Calling led_set_blink with value x
Calling led_set_blink with value x
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
Calling led_set_blink with value x
Calling led_set_blink with value x
Calling led_set_blink with value x
Calling led_set_blink with value x
Calling led_set_blink with value x
Calling led_set_blink with value x
Calling led_set_blink with value x
Calling led_set_blink with value x
Calling led_set_blink with value x
Calling led_set_blink with value x
Calling led_set_blink with value x
Calling led_set_blink with value x
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
LTFileServer:~#
LTFileServer:~#

mount

Code:

LTFileServer:~# mount
/dev/md0 on / type ext3 (rw,noatime,nodiratime,barrier=1)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755,size=5M)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev,size=5M)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
tmpfs on /tmp type tmpfs (rw,size=100M)
/var/log on /var/log.hdd type none (rw,bind)
ramlog-tmpfs on /var/log type tmpfs (rw,size=20M)
/DataVolume/cache on /CacheVolume type none (rw,bind)
none on /sys/kernel/security type securityfs (rw)
rpc_pipefs on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
nfsd on /proc/fs/nfsd type nfsd (rw)
/dev/sdc1 on /var/media/Ultra type vfat (rw,utf8,errors=continue,fmask=013,dmask=002,uid=99,gid=1000)
LTFileServer:~#
LTFileServer:~#

parted -l

Code:

LTFileServer:~# parted -l
Model: ATA WDC WD20EARX-00P (scsi)
Disk /dev/sda: 2000GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End     Size    File system     Name     Flags
 3      15.7MB  528MB   513MB   linux-swap(v1)  primary  raid
 1      528MB   2576MB  2048MB  ext3            primary  raid
 2      2576MB  4624MB  2048MB  ext3            primary  raid
 4      4624MB  2000GB  1996GB                  primary  raid


Model: ATA WDC WD20EARX-00P (scsi)
Disk /dev/sdb: 2000GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End     Size    File system     Name     Flags
 3      15.7MB  528MB   513MB   linux-swap(v1)  primary  raid
 1      528MB   2576MB  2048MB  ext3            primary  raid
 2      2576MB  4624MB  2048MB  ext3            primary  raid
 4      4624MB  2000GB  1996GB                  primary  raid


Model: SanDisk Ultra (scsi)
Disk /dev/sdc: 32.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
 1      11.2MB  32.0GB  32.0GB  primary  fat32        lba


Model: Unknown (unknown)
Disk /dev/md0: 2048MB
Sector size (logical/physical): 512B/512B
Partition Table: loop

Number  Start  End     Size    File system  Flags
 1      0.00B  2048MB  2048MB  ext3


Model: Unknown (unknown)
Disk /dev/md2: 513MB
Sector size (logical/physical): 512B/512B
Partition Table: loop

Number  Start  End    Size   File system     Flags
 1      0.00B  513MB  513MB  linux-swap(v1)


Error: /dev/md3: unrecognised disk label

LTFileServer:~#
LTFileServer:~#
LTFileServer:~#

From what I have managed to put together by reading left and right the RAID 1 is md0 made from sda and sdb (Hard drives)
And the problem seems to be something on the superblock being corrupted. but if I try to use fsck command to attempt to fix it it...

Code:

LTFileServer:~# fsck /dev/md0
fsck from util-linux-ng 2.17.2
e2fsck 1.41.12 (17-May-2010)
/dev/md0 is mounted.

WARNING!!!  The filesystem is mounted.   If you continue you ***WILL***
cause ***SEVERE*** filesystem damage.

Do you really want to continue (y/n)? no

check aborted.
LTFileServer:~#

All help and advise is really welcome.