Mutt Does Not Show Full Subject

I want to get the time when program starts and finishes. But it always show the same time. Here is my shell script. But it always show that `START TIME` is same as `END TIME`.
Code:

host_list=("c15-0330-01.ad.mtu.edu" "c15-0330-02.ad.mtu.edu" "c15-0330-03.ad.mtu.edu" "c15-0330-04.ad.mtu.edu")
program=("L_1" "L_4" "L_3" "L_4")
subject="The job is finished"
START=$(date +"r")
address="/home/campus27/zwang10/Desktop/AWRR/program/power/vmodel_1/nprot/K_10"
ssh -f "${host_list[0]}" "cd '$address' && nohup Rscript '${program[0]}.R' > '${program[0]}_sh.txt';echo 'The job\n $address\n${program[0]} is finished\nSTART TIME = $START\n' END TIME =`date +"%r"` | mutt zwang10@mtu.edu -s '${host_list[0]} - Job ${program[0]}.R finished' -a '$address/${program[0]}_sh.txt';"

I need to use `ssh` to send command to different computers to run programs. Can I define a variable of `Directory` and `program` in front of this shell script? Then, I do not need to write them every time? The following is my shell script.

`host_list=("c15-0330-10.ad.mtu.edu" "c15-0330-11.ad.mtu.edu" "c15-0330-12.ad.mtu.edu")`
`# I have multiple programs`
`# program=c("L_1","L_2","L_3")`
`ssh -f "${host_list[0]}" 'set Directory="/home/campus27/zwang10/Desktop/AWRR/program/power/vmodel_1/nprot/K_10"; cd $Directory && nohup Rscript L_1.R> L_1_sh.txt;echo "The job L_1 is finished" |mutt "zwang10@mtu.edu" -s "The job L_1 is finished"';
ssh -f "${host_list[1]}" 'set Directory="/home/campus27/zwang10/Desktop/AWRR/program/power/vmodel_1/nprot/K_10"; cd $Directory && nohup Rscript L_2.R> L_2_sh.txt;echo "The job L_2 is finished" |mutt "zwang10@mtu.edu" -s "The job L_2 is finished"';
ssh -f "${host_list[2]}" 'set Directory="/home/campus27/zwang10/Desktop/AWRR/program/power/vmodel_1/nprot/K_10"; cd $Directory && nohup Rscript L_3.R> L_3_sh.txt;echo "The job L_3 is finished" |mutt "zwang10@mtu.edu" -s "The job L_3 is finished"';`

Hi!

Here is mine configuration and I want make it show unicode(russian) in console, it works perfect in X11 but not when I logging into tty.

vconsole.conf
Code:

LOCALE="en_US.UTF-8"
KEYMAP="sv-latin1"
FONT_UNIMAP="lat1"
FONT_MAP="ISO8859-1"
CONSOLEFONT="ruscii_8x8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Stockholm"
USECOLOR="yes"

Hi guys,

i'm beginner with Unix, I tried my best, but I Really don't know how to finish it .

here's my problem : I have to do something like Student system - student's name | subjects | mark |credits.

after starting script it will ask you for Student's name, then which subject, then the mark will appear.

It's a homework, and I have my own idea how to solve it, but cannot finish it, i don't want complete solution, just a help!

Code:

#!/bin/bash
echo "Students name"
echo -n "Enter student's name: "
read name
echo
case $name in
Example1|Math) echo "C" ;;
Example2|Programming) echo "D" ;;
Example3|WWW) echo "A" ;;
Example4|Economie) echo "-" ;;
esac

I don't now how to bring together case with second things which is "enter subject".

I appreciate any help

I have many hosts as following. But those hosts are dual operating system (Linux and Windows). I always run program background. If someone is using Linux, it is fine. But if someone is using windows or the host is offline. Then, I cannot use ssh. The way I do preiviously is first ssh one by one. And then find the hosts which are offline or windows. And write them down one by one. And then ssh to hosts except them. Let us assume the number of programs is less than the total available hosts. Can someone write a shell script to output the all available hosts to a file like "host_available"?
Here is the host file.
https://www.dropbox.com/s/vbz6w864y3...tlist.txt?dl=0
I am using ssh to connect the computers on campus. If the computer I am trying to connect is offline or using windows, the ssh will take long time, and finally it will failed. I write a shell script to generate the hostlist
Code:

#!/bin/bash
for i in `seq -w 1 28`
do
echo "c15-0330-$i.ad.mtu.edu"
# I would like to add a command here to see whether ssh c15-0330-$i.ad.mtu.edu it succeeds or not. And then output a #file which contains the all available host.
done
for i in `seq -w 1 20`
do
echo "c28-0112-$i.ad.mtu.edu"
done
for i in `seq -w 1 20`
do
echo "c28-112a-$i.ad.mtu.edu"
done

I do not how to set a certain time to see whether connection is successful or not (see the comment in the shell script).

Hello,

They gave me this:
Code:

#!/bin/bash

# Write error message on stderr and die
function die() {
  echo "$@" >&2
  exit 1
}

# Load var from properties files
function load() {
  for propertie in "$@" ; do
    [[ -f "${propertie}" ]] || die "load() : \"${propertie}\" don't exist !"
    while read ; do
echo "${REPLY%=*}"
echo "${REPLY#*=}"
      [[ -n "${REPLY%%=*}" && -z "${REPLY#*=}" ]] || die "load() : Variable \"${REPLY%%=*}\" is empty!"
      eval "${REPLY%%=*}"=\'"${REPLY#*=}"\'
    done < "${propertie}"
  done
}

load "manage_srcds.conf"
echo "SRCDS_TICKRATE=$SRCDS_TICKRATE"
echo "SRCDS_SCREEN=$SRCDS_SCREEN"
echo "SRCDS_SRCDS_GAME_NAME=$SRCDS_GAME_NAME"
echo "SRCDS_MAXPLAYERS=$SRCDS_MAXPLAYERS"

but, return:
Quote:
###################################################
###################################################
load() : Variable "###################################################" is empty!

cat manage_srcds.conf

I just wish that there was no empty variable excluding those who do not have integer.

Best regards,

i need a bash script to switch to zero second on ac the waiting time for turning off the monitor (highlighten in red). same as for on battery (highlighten in purple)

Code:

<?xml version="1.0" encoding="UTF-8"?>

<channel name="xfce4-power-manager" version="1.0">
  <property name="xfce4-power-manager" type="empty">
    <property name="power-button-action" type="empty"/>
    <property name="show-tray-icon" type="empty"/>
    <property name="logind-handle-lid-switch" type="bool" value="true"/> 
    <property name="dpms-on-ac-sleep" type="uint" value="1"/>
    <property name="dpms-on-ac-off" type="uint" value="2"/> 
    <property name="brightness-on-battery" type="uint" value="9"/> 
    <property name="dpms-on-battery-sleep" type="uint" value="1"/>
    <property name="dpms-on-battery-off" type="uint" value="2"/> 
    <property name="lock-screen-suspend-hibernate" type="bool" value="false"/>
    <property name="dpms-enabled" type="bool" value="true"/>
  </property>
</channel>

What I did in windows was create images of my drive and restore them.

in linux I am running

Code:

rsync -aAXv --exclude={"/home/*","/dev/*","/proc/*","/sys/*","/tmp/*","/run/*","/mnt/*","/media/*","/lost+found"} /* /path/to/backup/folder

and this creates a folder for me with all my files, and apparently saves meta data like permissions and paths...

Since I'm using arch and things break sometimes,I'm booted into a CLI with errors and cannot figure my way out since I'm a noob... would I be able to just delete my entire root and replace it with the rsync backup without a problem?

I just installed Redhat 7 and try to config the network , add the IP address to network card , but I got the problem.

I modify the file /etc/sysconfig/network-scripts/ifcfg-enp0s3 , the configuration is as below , and then reboot .

DEVICE="enp0s3"
NETBOOT="yes"
HWADDR="08:00:27:15:38:B7"
TYPE="Ethernet"
BOOTPROTO="none"
NAME="enp0s3"
UUID="462f4834-4fe7-43a7-84e7-83b2722e94c1"
ONBOOT="yes"
IPADDR="192.168.1.1"
NETMASK="255.255.255.0"

After reboot , I use "ip addr show" still not shown the ip address , the ip address is still blank , would advise what is wrong ? thanks

I want to And search grep shell

but It's hard to grep variable


---------------------------------------------------------------
#!/bin/bash


if [ $# -eq 0 ]
then
echo "Ussage: phone searchfor [...searchfor]"
echo "(You didn't tell me what you want to search for )"

else

pass=0
find=""

for idx in $*
do
if [ -n "$idx" ]
then
if [ $pass -eq 0 ]
then
find=$(egrep "$idx" mydata)
pass=1

else

find=$("$find" | grep "$idx")

echo $find
fi
fi

done

if [ -z "$find" ]
then
echo "There is no such thing"
else

echo $find | awk -f display.awk

fi

fi

-----------------------------------------------------

there is one error : command not found

in find=$("$find" | grep "$idx")

how can I grep variable and store it into variable?