Hai..... Regarding Command Not Found In Bin

I am looping through a file and then want to run some commands. Below is my code.

cat $PATHNAME | while read line;
do
PATH=$line
ls -t $PATH/javacore* >$NDIR
diff -w $ODIR $NDIR > $CHGS
done
This is the error I get.
./java_snap_monitor.sh: line 13: ls: command not found
./java_snap_monitor.sh: line 14: diff: command not found

I have a shell script that calls an expect script I wrote to ssh login to another host and get user input regarding that host's network configuration. I pass four arguments to the expect script: the remote host ip address, the username, the password, and the list of commands to run. My expect script is below:

#!/usr/bin/expect
# Usage: expectssh <host> <ssh user> <ssh password> <script>

set timeout 60
set prompt "(%|#|\\$) $"
set commands [lindex $argv 3];

spawn ssh [lindex $argv 1]@[lindex $argv 0]

expect {
"*assword:" {
send -- "[lindex $argv 2]\r"
expect -re "$prompt"
send -- "$commands\r"
}

"you sure you want to continue connecting" {
send -- "yes\r"
expect "*assword:"
send -- "[lindex $argv 2]\r"
expect -re "$prompt"
send -- "$commands\r"
}

timeout {
exit }

expect -re $prompt
send -- "exit\r"
}

The script runs well, except that if I send a command such as 'read' that requires user input, the script does not continue or exit after the user presses enter. It just hangs.

The commands I pass to the expect script and it's call are as follows:
SCRIPT='hostname > response.txt;netstat -rn;read net_card?"What is the network interface card number? " >> response.txt; read net_mask?"What is the subnet mask? " >> response.txt'

/usr/bin/expect ./expectssh.exp $hostip $usr $pswd "$SCRIPT"

Any suggestions on how I can pass a command to my expect script that requires user input without it hanging?

On a side note because I know it will come up - I am not allowed to do key-based automatic SSH login. I have to prompt for a username and password, which is done from my main shell script.

Thanks for any suggestions and help you can provide!

Hello.

I have a shell script, which I am using to access the SMB Client:

Code:

#!/bin/bash
cd /home/username
smbclient //link/to/server$ password -W domain -U username
recurse
prompt
mput baclupfiles
exit

Right now, the script runs, accesses the server, and then asks for a manual input of the commands.

Can someone show me how to get the commands:
Code:

recurse, prompt, mput baclupfiles and exit

to be run by the shell script please?

I am calling lsof command in perl script,but due to node issue it's getting stucked .
Because of this script is unable to exit and finish execution. please help.

Hello guys!

First thing to be said is, that I am not native English speaker and I hope my english will be sufficient for this problem.

I am trying to make some kind of thin client from my Raspberry Pi 2.
I put Raspbian Wheezy distribution inside.

After I tried different clients (rdesktop, remmina, xrdp) I found FreeRDP, that looks like what I was looking for.

After the setup and network configuration of my Raspbian I updated repositories and installed freerdp through
Quote:
sudo apt-get update
sudo apt-get install freerdp
Their wiki says that there are 2 forms of commands. The newer one (through /PARAMETER) and older one (through -PARAMETER)
https://github.com/FreeRDP/FreeRDP/w...dLineInterface

How do I get new commands to work? I thought that apt-get install freerdp would bring me the newest version. My version is 1.0.1 and I am not sure if it is the newest version.

I need to run my rdp client from shell, that is why I refused to use remmina.

I hope i explained my problem weell enough.

Thank you for any suggestions.

hello

first year of learning linux and bash script
Now i wrote a bash script with a function.
Today i recieved a email from my teacher that 1 function only can have 1 command and no more then 1?

thats a part of the script

Code:

function tx_unreachable_msg()
{
LOGLINE="[$DATE] no ip service unreachable"
typewriter "$NOIPSERVICE niet bereikbaar" .1
sleep 1 
typewriter "Mail wordt verzonden naar $email" .1
mail -s "NO ip mail error" "$email"<<EOF
dynupdate.no-ip.com niet bereikbaar @ $DATE
EOF
}

it's part dutch part english but the point is that the first LOGLINE is forbidden in the function because i use the functie to send a mail end not to write a logline but that's a part of the command in my case?

So what does this function?
If the no ip service is unreachable then it's write to /etc/var/log/no-ip and after the sleep it's send a simpel mail to the adres in the variabele mail.

i read here at the first line:
Quote:
Shell functions are a way to group commands for later execution using a single name for the group.
so is it true that my function is wrong and so no can someone point me to a website where it's say that more commands are allow in 1 function0

grts b

Hi All,

Not able to find TREE command in EL6, its working fine in EL5. Need help on this.

Below are the details.



[root@localhost ~]# mkdir -p /college/sports/performer/cricket

[root@localhost ~]# tree /college/
-bash: tree: command not found

[root@localhost ~]# tree college/
-bash: tree: command not found

[root@localhost ~]# which tree
/usr/bin/which: no tree in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin: /usr/bin:/root/bin)

[root@localhost ~]# uname -a
Linux localhost.localdomain 2.6.32-71.el6.x86_64 #1 SMP Wed Sep 1 01:33:01 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux

[root@localhost ~]# id
uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel) context=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023

I am taking a Linux class and am doing horribly, I just do not understand Linux. Can anyone please tell me how to create a shell script containing the `echo`, `whoami`, `groups`, and `pwd` commands?

I can do these as individual commands but cannot figure out how to do this in a shell script and get the output to produce output similar to the following:

You a
root
You are a member of the following groups:
root bin daemon sys adm disk wheel
Your current working directory is:
/tmp

My hair is getting thinner and grayer because of this.. Please help!

hello everyone.,
i am using linux Centos 6 machine, i have downloaded "back in time" through command line.
but i dont know how to install "back in time" from the command line.
i found some commands but that for UBUNTU and not running on Centos 6, giving error.
so , without GUI. can be possible to install and use it?????

thanks in advance..

I want to write a bash shell script to execute a command for one minute then stop that command (ctrl c) pause for 10 seconds then run another command for one minute then stop that command pause for 10 seconds then go back to the begining of the script and loop indefinetly.

First I want to run this command for one minute;

reaver -i mon0 -c 6 -b "mac address" -a -vv

stop previous command and pause for 10 seconds

Then run this command for one minute;

airodump-ng -i mon0

stop previous command and pause for 10 seconds

Then recall reaver command and continue to loop through until reaver spits out result.

I imagine I will need to create a function for each command, an if statement and an ifelse statement and I will need the break and sleep commands. but I am not sure about the syntax, PLEASE HELP THIS NOOB!