Flashing Screen On Dual-boot Config.

I am trying to boot Linux Mint from an 8gb Sandisk USB. I changed my boot settings and it boots into what I believe is called grub? I am given two options, Boot Linux Mint, Boot Linux Mint (compatibility mode). When I select either of them all I get is a black screen. I've tried many things to get around this, messing with my graphics card settings (within grub), different USB's (another 8gb and a 32gb), I tried Ubuntu and that just doesn't boot at all I go straight back to my UEFI settings. I'm very new to Linux and I don't just want to hop in, I just want to boot from my USB whenever I want to play around with it. Thank You

Note: I'm running windows 8.1 currently on a ASUS N550JV laptop. I've been using the UUI from Pen Drive Linux.

Hi, So im quite new to linux and im not surprised as iv tried before to check it out and failed then (old computers problem) but i decided to have another go on a new comp recently.

UEFI mobo
Nvidia geforce 770 as output.

I need a duel boot of win7 & mint. Win7 is installed.

UEFI has caused me so many problems its just beyond me ! (i had never heard of it before i brought this comp)

booting Mint from a cd/dvd works fine.

booting from a USB fails with a blank or locked up screen at the first mint logo. (many tests with dif methods of creating live USB)

Installing mint with grub over the top of win boot loader fails , i get no options to choose between win & linux it boots straight to linux and then fails (same error as above)

I have a small SSD with win7 , there is not a lot of space on it so i want to install mint 17.1KDE on a different HDD.

After a month or so of reading testing reading testing etc i ended up getting mint installed on partitions i created on secondary HDD but i had to keep the windows boot loader in place and use easyBCD.

However now i get the choice of win7 or linux and windows still actually works (breakthrough ^^) BUT linux just crashes at boot (at the first logo) and then the monitor looses all signal?


I am soo frustrated. Mint will run of a CD but i can not get it to work in any other way , please help

Thx.

I have a Toshiba laptop that will not boot. I get to the grub menu which gives me the option to load Ubuntu, Ubuntu recovery mode, or a couple of memory tests.

If I select Ubuntu I get a black screen with a flashing cursor in the top left corner.

Selecting recovery mode gives me a lot of messages with the last one being "EDD information not available".

The memory test option does not return any errors.

If I try booting Mint from a bootable DVD I get the Mint screen and then it goes gray with a flashing cursor in the top left corner.

Any suggestions?

Hello All. This is my first post here. I am worse than a newbie; I'm a PC dinosaur! Not joking either.
Recently got a Dell Inspiron 3048 with Windows 8.1 pre installed. As I am a die hard XP user (my other PC is a Dell Dimension 2400), and seeing that PC's days may be numbered, I want to start using Linux, and decided Mint 17.1 would be first on the list.
Ordered a Linux Mint 17.1 boot disk and went to install it. At the option for a dual boot with Windows, I got lost, and did not understand the "other" choice versus making Linux the only OS on the PC. I wound up wiping my HDD and lost contact with Windows 8.1. Fortunately, the Dell Tech I got at Dell Support was able to walk me through getting Windows back up, but the only way I can now access Mint 17.1 is with the boot disk, but there is no set up options as it is already set up, even though incorrectly for a dual boot.
How do I wipe out Linux without losing Windows 8.1 as well so I can re install Linux and this time make the correct selection for a dual boot?
Anyone willing to respond please do so small and slow so I can follow.
TIA.
BTW, I have tried installing Zorin OS 9 Ultimate on my XP machine via DVD and USB, but I can't get past the f1/f2 loop, even though I have reconfigured my boot sequence according to the drive I'm installing from. Zorin support has been MIA on this. Anyone having a similar problem?
Cheers

Hi,

Before installing Linux Mint 17 to the entire HDD of my HP p2 1317cb desktop, it was running a preinstalled windows 8 OEM UEFI. After several failed attempts of dual booting(no grub menu and boots directly to the windows 8) i then decided to do a erase all and install Linux option. Now i have Linux Mint 17.1 working flawlessly, so far. What i want to now do is, dual boot a windows 7 installation alongside my Linux. Please advise on the best way to do this.
Thank You.

Note: Before doing a clean install of Linux i disabled secure boot,enabled legacy, and disabled fast boot.

I'm quite new to Linux, and after a lot of trials ended up with Mint Mate (dual boot with Win7). I've been using it for a few weeks now with no real problems.
However, I've just transferred my system to a new pc case. The only alteration I made was to change the sata connector cable from sata 1 to sata 0. When I tried to boot to Mint I got screen after screen of errors (all unintelligible to me). I tried the recovery boot and got even more screens of errors. I did once get a desktop showing but it wouldn't actually do anything. So I'm now unable to open Mint – it just says there is an error on the disk drive.
Thank goodness for Win7! That opened first time, no problems – and continues to open fine (and I can access and copy files from there).
Obviously after such a catastrophic experience with Mint I'm going to always stick with dual boot. Unfortunately I'm now very reluctant to trust Linux with anything important – though I do want to go on using it for internet access. Can someone recommend a really stable (but easy to use) Mate distro please? Thank you.

On my partner's duel boot computer (Windows 7 & Linux Mint 17.1) after an update and grub upgrade the time the choices menu stays on screen is only a few seconds.

How do I extend that time from a few seconds to about 15 seconds that will give her enough time to choose her OS of choice?

Thanks,

gael

I recently purchased a laptop that came with Windows 8.1 as the OS. I am trying to switch it over to Linux Mint 17.1 (Rebecca). I found an Ubuntu disk loader that I placed on a DVD and it boots just fine. Downloaded the 32-bit Linux Mint .I so and burned it to a DVD. Tried to boot from it and nothing. Being new, the problem pretty much has to be something insanely simple but I sure can't find it. Would really appreciate any expertise out there.

Did it again!

Last week, with help from this forum, I was able to install Linux Mint 17.1 dual boot with Windows 8.1. It worked so well, I decided to explore other Linux distros recommended by forum members as some I wanted to check out.

I was using Unetbootin to download and install these as live sessions on my Windows 8.1 partition.

On my last such download, something went wrong, and no doubt I caused the error, but no clue as to how.

When I opened up this PC, I got the normal dual boot option for Windows and Mint. When I selected Windows, I found an additional dual boot option between it and Unetbootin! Somehow I created a partition (?) on my C Drive for Unetbootin (see Thumbnail below).
This Unetbootin option only goes to a page for me to choose another OS. Further, when I rebooted, the Windows/Mint dual boot option no longer existed, just the Windows/Unetbootin one.

Been checking out various articles and websites about BCD/MBR repair, but nothing definitive (that I can understand) about modifying these to delete the Unetbootin partition and restoring the Windows/linux dual boot.

Naturally, this is a newbie land mine area, so I'm very reluctant to try anything I can't fully understand, which is the category everything I've Googled on this topic falls into.

Anyone know how I can resolve this short of a complete start over
installation based on steps that basically a PC fence post can follow?

TIA
Cheers!

I have a dual boot installation of Mint 17 Cinnamon (separate / & /home & swap partitions) along with WINXP (c: winxp, D: data on NTFS).

I am not happy with the cinnamon and want to install XFCE 17 (fresh download from mint website).

I have created 3-4 different usb sticks wwith the iso (thru unetbootin, YUMI, unisersal boot installer) and tried to install. The installation freezes on the second screen itself - after asking for the language, it just sits there and waits for something to happen. Tried this 3-4 times but it just keeps the wheel spinning. However, while I am trying this I am unable to use the laptop perfectly well. In fact, I am typing this while the the installation is trying to do something!

I will be very grateful for the help. I am not too well uquipped with the Linux command system and still rate myself as a newbie.