Driver "fglrx" For "ATI Cedar Pro HD 5450/6350" Slow; How To Make It Quicker?

I newly installed the fglrx driver instead the radeon opensource; the video is better but the movement of windows is very slow. Is there a possibility to accelerate that system?
the Xorg.conf has no specific setup.
Any advice is welcome.

Code:
System:    Host: hp7100 Kernel: 3.7.10-antix.7-486-smp i686 (32 bit)
           Desktop: Fluxbox 1.3.2
           Distro: antiX-13.1_386-base Luddite 19 June 2013
Machine:   System: Hewlett-Packard product: HP Compaq dc7100 USDT(DX877AV) serial: HUB5090KPM
           Mobo: Hewlett-Packard model: 0980h serial: HUB5090KPM
           Bios: Hewlett-Packard v: 786C1 v02.15 date: 08/07/2008
CPU:       Single core Intel Pentium 4 (-HT-) cache: 2048 KB 
           clock speeds: max: 3393 MHz 1: 3393 MHz 2: 3393 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI Cedar PRO [Radeon HD 5450/6350]
           Display Server: X.org 1.12.4 driver: fglrx
           tty size: 80x24 Advanced Data: N/A for root
...
Info:      Processes: 94 Uptime: 1 min Memory: 181.9/3040.2MB
           Client: Shell (bash) inxi: 2.2.19

Code:
[    15.986] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    15.986] X Protocol Version 11, Revision 0
[    15.986] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[    15.986] Current Operating System: Linux hp7100 3.7.10-antix.7-486-smp #4 SMP Tue Nov 12 13:37:53 EET 2013 i686
[    15.986] Kernel command line: root=/dev/sda2 quiet nomodeset radeon.modeset=0
[    15.986] Build Date: 09 February 2015  10:12:47AM
[    15.986] xorg-server 2:1.12.4-6+deb7u6 (Julien Cristau <jcristau@debian.org>) 
[    15.986] Current version of pixman: 0.26.0
[    15.986] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    15.986] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.987] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 15 21:58:52 2015
[    16.044] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    16.044] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    16.090] (==) No Layout section.  Using the first Screen section.
[    16.090] (==) No screen section available. Using defaults.
[    16.090] (**) |-->Screen "Default Screen Section" (0)
[    16.090] (**) |   |-->Monitor "<default monitor>"
[    16.104] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    16.104] (**) |   |-->Device "My GPU"
[    16.104] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    16.104] (==) Automatically adding devices
[    16.104] (==) Automatically enabling devices
[    16.401] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
...
[    16.418] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    16.418] 	Entry deleted from font path.
[    16.418] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/100dpi,
	built-ins
[    16.418] (==) ModulePath set to "/usr/lib/xorg/modules"
[    16.418] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    16.434] (II) Loader magic: 0xb77995a0
[    16.434] (II) Module ABI versions:
[    16.434] 	X.Org ANSI C Emulation: 0.4
[    16.434] 	X.Org Video Driver: 12.1
[    16.434] 	X.Org XInput driver : 16.0
[    16.434] 	X.Org Server Extension : 6.0
[    16.435] (--) PCI:*(0:6:0:0) 1002:68f9:1787:2291 rev 0, Mem @ 0xe0000000/268435456, 0xf0600000/131072, I/O @ 0x00001000/256, BIOS @ 0x????????/131072
[    16.435] (II) Open ACPI successful (/var/run/acpid.socket)
[    16.435] (II) LoadModule: "extmod"
[    16.509] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    16.576] (II) Module extmod: vendor="X.Org Foundation"
[    16.576] 	compiled for 1.12.4, module version = 1.0.0
[    16.577] 	Module class: X.Org Server Extension
[    16.577] 	ABI class: X.Org Server Extension, version 6.0
[    16.577] (II) Loading extension SELinux
[    16.577] (II) Loading extension MIT-SCREEN-SAVER
[    16.577] (II) Loading extension XFree86-VidModeExtension
[    16.577] (II) Loading extension XFree86-DGA
[    16.577] (II) Loading extension DPMS
[    16.577] (II) Loading extension XVideo
[    16.577] (II) Loading extension XVideo-MotionCompensation
[    16.577] (II) Loading extension X-Resource
[    16.577] (II) LoadModule: "dbe"
[    16.577] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    16.617] (II) Module dbe: vendor="X.Org Foundation"
[    16.617] 	compiled for 1.12.4, module version = 1.0.0
[    16.617] 	Module class: X.Org Server Extension
[    16.617] 	ABI class: X.Org Server Extension, version 6.0
[    16.617] (II) Loading extension DOUBLE-BUFFER
[    16.617] (II) LoadModule: "glx"
[    16.617] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.732] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    16.732] 	compiled for 6.9.0, module version = 1.0.0
[    16.732] (II) Loading extension GLX
[    16.732] (II) LoadModule: "record"
[    16.733] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    16.757] (II) Module record: vendor="X.Org Foundation"
[    16.757] 	compiled for 1.12.4, module version = 1.13.0
[    16.757] 	Module class: X.Org Server Extension
[    16.757] 	ABI class: X.Org Server Extension, version 6.0
[    16.757] (II) Loading extension RECORD
[    16.757] (II) LoadModule: "dri"
[    16.757] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    16.767] (II) Module dri: vendor="X.Org Foundation"
[    16.767] 	compiled for 1.12.4, module version = 1.0.0
[    16.767] 	ABI class: X.Org Server Extension, version 6.0
[    16.767] (II) Loading extension XFree86-DRI
[    16.767] (II) LoadModule: "dri2"
[    16.767] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    16.776] (II) Module dri2: vendor="X.Org Foundation"
[    16.776] 	compiled for 1.12.4, module version = 1.2.0
[    16.776] 	ABI class: X.Org Server Extension, version 6.0
[    16.776] (II) Loading extension DRI2
[    16.776] (II) LoadModule: "fglrx"
[    16.782] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    18.151] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    18.152] 	compiled for 1.4.99.906, module version = 14.50.2
[    18.152] 	Module class: X.Org Video Driver
[    18.190] (II) Loading sub module "fglrxdrm"
[    18.190] (II) LoadModule: "fglrxdrm"
[    18.190] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    18.310] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    18.310] 	compiled for 1.4.99.906, module version = 14.50.2
[    18.321] (II) AMD Proprietary Linux Driver Version Identifier:14.50.2
[    18.321] (II) AMD Proprietary Linux Driver Release Identifier: 14.501.1003                          
[    18.321] (II) AMD Proprietary Linux Driver Build Date: Nov 20 2014 21:22:53
[    18.321] (++) using VT number 7

[    18.342] (WW) Falling back to old probe method for fglrx
[    18.719] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    18.780] ukiDynamicMajor: found major device number 250
[    18.849] (--) Assigning device section with no busID to primary device
[    18.849] (--) Chipset Supported AMD Graphics Processor (0x68F9) found
[    18.849] (WW) fglrx: No matching Device section for instance (BusID PCI:0@6:0:1) found
[    18.850] (II) fglrx(0): pEnt->device->identifier=0xb8b0c5c8
[    18.850] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[    18.850] (II) fglrx(0): FB driver is not enabled
[    18.850] (II) Loading sub module "vgahw"
[    18.850] (II) LoadModule: "vgahw"
[    18.851] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    18.891] (II) Module vgahw: vendor="X.Org Foundation"
[    18.891] 	compiled for 1.12.4, module version = 0.1.0
[    18.892] 	ABI class: X.Org Video Driver, version 12.1
[    18.892] (II) fglrx(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    18.892] (==) fglrx(0): Depth 24, (==) framebuffer bpp 32
[    18.892] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    18.892] (==) fglrx(0): Default visual is TrueColor
[    18.892] (==) fglrx(0): RGB weight 888
[    18.892] (II) fglrx(0): Using 8 bits per RGB 
[    18.892] (==) fglrx(0): Buffer Tiling is ON
[    18.914] (II) Loading sub module "fglrxdrm"
[    18.914] (II) LoadModule: "fglrxdrm"
[    18.914] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    18.914] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    18.914] 	compiled for 1.4.99.906, module version = 14.50.2
[    18.916] ukiDynamicMajor: found major device number 250
[    18.916] ukiDynamicMajor: found major device number 250
[    18.916] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[    18.916] ukiOpenDevice: node name is /dev/ati/card0
[    18.916] ukiOpenDevice: open result is 11, (OK)
[    20.601] ukiOpenByBusid: ukiOpenMinor returns 11
[    20.601] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[    20.601] (**) fglrx(0): NoAccel = NO
[    20.602] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    20.602] (--) fglrx(0): Chipset: "AMD Radeon HD 5450  " (Chipset = 0x68f9)
[    20.602] (--) fglrx(0): (PciSubVendor = 0x1787, PciSubDevice = 0x2291)
[    20.602] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    20.602] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[    20.602] (--) fglrx(0): MMIO registers at 0xf0600000
[    20.602] (--) fglrx(0): I/O port at 0x00001000
[    20.602] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    20.619] (II) fglrx(0): AC Adapter is used
[    20.639] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    21.044] (II) Loading sub module "vbe"
[    21.044] (II) LoadModule: "vbe"
[    21.044] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    21.059] (II) Module vbe: vendor="X.Org Foundation"
[    21.059] 	compiled for 1.12.4, module version = 1.1.0
[    21.059] 	ABI class: X.Org Video Driver, version 12.1
[    21.084] (II) fglrx(0): VESA BIOS detected
[    21.084] (II) fglrx(0): VESA VBE Version 3.0
[    21.084] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    21.084] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    21.084] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[    21.084] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    21.084] (II) fglrx(0): VESA VBE OEM Product: CEDAR
[    21.084] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    21.084] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    21.085] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR2
[    21.085] (II) fglrx(0): PCIE card detected
[    21.085] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    21.085] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    21.085] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[    21.085] (II) fglrx(0): RandR 1.2 support is enabled!
[    21.085] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    21.085] (II) Loading sub module "fb"
[    21.085] (II) LoadModule: "fb"
[    21.085] (II) Loading /usr/lib/xorg/modules/libfb.so
[    21.099] (II) Module fb: vendor="X.Org Foundation"
[    21.099] 	compiled for 1.12.4, module version = 1.0.0
[    21.099] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    21.099] (II) fglrx(0): EDID Management option: EDID Management is enabled
[    21.099] (II) Loading sub module "ddc"
[    21.099] (II) LoadModule: "ddc"
[    21.099] (II) Module "ddc" already built-in
[    21.526] (II) fglrx(0): Output DFP1 has no monitor section
[    21.527] (II) fglrx(0): Output DFP2 has no monitor section
[    21.527] (II) fglrx(0): Output CRT1 has no monitor section
[    21.527] (II) fglrx(0): Output CRT2 has no monitor section
[    21.527] (II) Loading sub module "ddc"
[    21.527] (II) LoadModule: "ddc"
[    21.527] (II) Module "ddc" already built-in
[    21.527] (II) fglrx(0): Connected Display0: CRT2
[    21.527] (II) fglrx(0): Display0 EDID data ---------------------------
[    21.527] (II) fglrx(0): Manufacturer: SNY  Model: 880  Serial#: 16843009
[    21.527] (II) fglrx(0): Year: 2003  Week: 18
[    21.527] (II) fglrx(0): EDID Version: 1.3
[    21.527] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    21.527] (II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
[    21.527] (II) fglrx(0): Max Image Size [cm]: horiz.: 36  vert.: 29
[    21.527] (II) fglrx(0): Gamma: 2.20
[    21.527] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    21.527] (II) fglrx(0): First detailed timing is preferred mode
[    21.527] (II) fglrx(0): redX: 0.633 redY: 0.340   greenX: 0.295 greenY: 0.603
[    21.527] (II) fglrx(0): blueX: 0.141 blueY: 0.096   whiteX: 0.283 whiteY: 0.298
[    21.527] (II) fglrx(0): Supported established timings:
[    21.527] (II) fglrx(0): 720x400@70Hz
[    21.527] (II) fglrx(0): 640x480@60Hz
[    21.527] (II) fglrx(0): 800x600@60Hz
[    21.527] (II) fglrx(0): 1024x768@60Hz
[    21.527] (II) fglrx(0): Manufacturer's mask: 0
[    21.527] (II) fglrx(0): Supported standard timings:
[    21.527] (II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    21.527] (II) fglrx(0): Supported detailed timing:
[    21.527] (II) fglrx(0): clock: 108.0 MHz   Image Size:  359 x 287 mm
[    21.527] (II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    21.527] (II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    21.527] (II) fglrx(0): Ranges: V min: 57 V max: 63 Hz, H min: 28 H max: 65 kHz, PixClock max 115 MHz
[    21.527] (II) fglrx(0): Monitor name: SDM-P82
[    21.527] (II) fglrx(0): Serial No: 4507930
[    21.527] (II) fglrx(0): EDID (in hex):
[    21.528] (II) fglrx(0): 	00ffffffffffff004dd9800801010101
[    21.528] (II) fglrx(0): 	120d01030e241d78ea0929a2574b9a24
[    21.528] (II) fglrx(0): 	18484ca1080081800101010101010101
[    21.528] (II) fglrx(0): 	010101010101302a009851002a403070
[    21.528] (II) fglrx(0): 	1300671f1100001e000000fd00393f1c
[    21.528] (II) fglrx(0): 	410b000a202020202020000000fc0053
[    21.528] (II) fglrx(0): 	444d2d5038320a2020202020000000ff
[    21.528] (II) fglrx(0): 	00343530373933300a202020202000a6
[    21.528] (II) fglrx(0): End of Display0 EDID data --------------------
[    21.528] (II) fglrx(0): Dynamic Surface Resizing Enabled
[    21.529] (II) fglrx(0): EDID for output DFP1
[    21.529] (II) fglrx(0): EDID for output DFP2
[    21.529] (II) fglrx(0): EDID for output CRT1
[    21.529] (II) fglrx(0): EDID for output CRT2
[    21.529] (II) fglrx(0): Manufacturer: SNY  Model: 880  Serial#: 16843009
[    21.529] (II) fglrx(0): Year: 2003  Week: 18
[    21.529] (II) fglrx(0): EDID Version: 1.3
[    21.529] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    21.529] (II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
[    21.529] (II) fglrx(0): Max Image Size [cm]: horiz.: 36  vert.: 29
[    21.529] (II) fglrx(0): Gamma: 2.20
[    21.529] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    21.529] (II) fglrx(0): First detailed timing is preferred mode
[    21.529] (II) fglrx(0): redX: 0.633 redY: 0.340   greenX: 0.295 greenY: 0.603
[    21.529] (II) fglrx(0): blueX: 0.141 blueY: 0.096   whiteX: 0.283 whiteY: 0.298
[    21.529] (II) fglrx(0): Supported established timings:
[    21.529] (II) fglrx(0): 720x400@70Hz
[    21.529] (II) fglrx(0): 640x480@60Hz
[    21.529] (II) fglrx(0): 800x600@60Hz
[    21.529] (II) fglrx(0): 1024x768@60Hz
[    21.529] (II) fglrx(0): Manufacturer's mask: 0
[    21.529] (II) fglrx(0): Supported standard timings:
[    21.529] (II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    21.529] (II) fglrx(0): Supported detailed timing:
[    21.529] (II) fglrx(0): clock: 108.0 MHz   Image Size:  359 x 287 mm
[    21.529] (II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    21.529] (II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    21.529] (II) fglrx(0): Ranges: V min: 57 V max: 63 Hz, H min: 28 H max: 65 kHz, PixClock max 115 MHz
[    21.529] (II) fglrx(0): Monitor name: SDM-P82
[    21.530] (II) fglrx(0): Serial No: 4507930
[    21.530] (II) fglrx(0): EDID (in hex):
[    21.530] (II) fglrx(0): 	00ffffffffffff004dd9800801010101
[    21.530] (II) fglrx(0): 	120d01030e241d78ea0929a2574b9a24
[    21.530] (II) fglrx(0): 	18484ca1080081800101010101010101
[    21.530] (II) fglrx(0): 	010101010101302a009851002a403070
[    21.530] (II) fglrx(0): 	1300671f1100001e000000fd00393f1c
[    21.530] (II) fglrx(0): 	410b000a202020202020000000fc0053
[    21.530] (II) fglrx(0): 	444d2d5038320a2020202020000000ff
[    21.530] (II) fglrx(0): 	00343530373933300a202020202000a6
[    21.530] (II) fglrx(0): Printing probed modes for output CRT2
[    21.530] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    21.530] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1328 1440 1688  960 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    21.530] (II) fglrx(0): Modeline "1280x768"x60.0  108.00  1280 1328 1440 1688  768 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    21.530] (II) fglrx(0): Modeline "1280x720"x60.0  108.00  1280 1328 1440 1688  720 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    21.530] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    21.530] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    21.530] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    21.530] (II) fglrx(0): Output DFP1 disconnected
[    21.530] (II) fglrx(0): Output DFP2 disconnected
[    21.530] (II) fglrx(0): Output CRT1 disconnected
[    21.530] (II) fglrx(0): Output CRT2 connected
[    21.530] (II) fglrx(0): Using exact sizes for initial modes
[    21.530] (II) fglrx(0): Output CRT2 using initial mode 1280x1024
[    21.530] (II) fglrx(0): DPI set to (96, 96)
[    21.530] (II) fglrx(0): Eyefinity capable adapter detected.
[    21.530] (II) fglrx(0): Adapter AMD Radeon HD 5450   has 3 configurable heads and 1 displays connected.
[    21.530] (==) fglrx(0):  PseudoColor visuals disabled
[    21.531] (II) Loading sub module "ramdac"
[    21.531] (II) LoadModule: "ramdac"
[    21.531] (II) Module "ramdac" already built-in
[    21.531] (==) fglrx(0): NoDRI = NO
[    21.531] (==) fglrx(0): Capabilities: 0x00000000
[    21.531] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    21.531] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    21.531] (==) fglrx(0): UseFastTLS=0
[    21.531] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[    21.531] (--) Depth 24 pixmap format is 32 bpp
[    21.531] (II) Loading extension ATIFGLRXDRI
[    21.531] (II) fglrx(0): doing swlDriScreenInit
[    21.531] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    21.531] ukiDynamicMajor: found major device number 250
[    21.531] ukiDynamicMajor: found major device number 250
[    21.531] ukiDynamicMajor: found major device number 250
[    21.532] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[    21.532] ukiOpenDevice: node name is /dev/ati/card0
[    21.532] ukiOpenDevice: open result is 12, (OK)
[    21.532] ukiOpenByBusid: ukiOpenMinor returns 12
[    21.532] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[    21.532] (II) fglrx(0): [uki] DRM interface version 1.0
[    21.532] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:6:0:0"
[    21.532] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    21.532] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb7580000
[    21.532] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    21.532] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    21.532] (II) fglrx(0): swlDriScreenInit done
[    21.532] (II) fglrx(0): Kernel Module Version Information:
[    21.532] (II) fglrx(0):     Name: fglrx
[    21.532] (II) fglrx(0):     Version: 14.50.2
[    21.532] (II) fglrx(0):     Date: Nov 20 2014
[    21.532] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[    21.532] (II) fglrx(0): Kernel Module version matches driver.
[    21.532] (II) fglrx(0): Kernel Module Build Time Information:
[    21.532] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.7.10-antix.7-486-smp
[    21.532] (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
[    21.532] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[    21.532] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    21.532] (II) fglrx(0): [uki] register handle = 0x00004000
[    21.593] (II) fglrx(0): DRI initialization successfull
[    21.630] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01040000
[    21.641] (==) fglrx(0): Backing store disabled
[    21.641] (II) Loading extension FGLRXEXTENSION
[    21.641] (==) fglrx(0): DPMS enabled
[    21.642] (II) fglrx(0): Initialized in-driver Xinerama extension
[    21.642] (**) fglrx(0): Textured Video is enabled.
[    21.642] (II) LoadModule: "glesx"
[    21.643] (II) Loading /usr/lib/xorg/modules/glesx.so
[    22.274] (II) Module glesx: vendor="X.Org Foundation"
[    22.274] 	compiled for 1.4.99.906, module version = 1.0.0
[    22.282] (II) Loading extension GLESX
[    22.282] (II) fglrx(0): GLESX enableFlags = 8784
[    22.294] (II) fglrx(0): GLESX is enabled
[    22.294] (II) LoadModule: "amdxmm"
[    22.294] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    22.321] (II) Module amdxmm: vendor="X.Org Foundation"
[    22.321] 	compiled for 1.4.99.906, module version = 2.0.0
[    22.335] (II) Loading extension AMDXVOPL
[    22.335] (II) Loading extension AMDXVBA
[    22.356] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[    22.359] (II) fglrx(0): Enable composite support successfully
[    22.359] (II) fglrx(0): X context handle = 0x1
[    22.359] (II) fglrx(0): [DRI] installation complete
[    22.359] (==) fglrx(0): Silken mouse enabled
[    22.360] (==) fglrx(0): Using HW cursor of display infrastructure!
[    22.361] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    22.606] (--) RandR disabled
[    22.606] (II) Initializing built-in extension Generic Event Extension
[    22.606] (II) Initializing built-in extension SHAPE
[    22.606] (II) Initializing built-in extension MIT-SHM
[    22.606] (II) Initializing built-in extension XInputExtension
[    22.606] (II) Initializing built-in extension XTEST
[    22.606] (II) Initializing built-in extension BIG-REQUESTS
[    22.606] (II) Initializing built-in extension SYNC
[    22.606] (II) Initializing built-in extension XKEYBOARD
[    22.606] (II) Initializing built-in extension XC-MISC
[    22.606] (II) Initializing built-in extension SECURITY
[    22.606] (II) Initializing built-in extension XINERAMA
[    22.606] (II) Initializing built-in extension XFIXES
[    22.606] (II) Initializing built-in extension RENDER
[    22.606] (II) Initializing built-in extension RANDR
[    22.606] (II) Initializing built-in extension COMPOSITE
[    22.606] (II) Initializing built-in extension DAMAGE
[    22.606] (II) SELinux: Disabled on system
[    22.611] ukiDynamicMajor: found major device number 250
[    22.611] ukiDynamicMajor: found major device number 250
[    22.611] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[    22.611] ukiOpenDevice: node name is /dev/ati/card0
[    22.611] ukiOpenDevice: open result is 13, (OK)
[    22.611] ukiOpenByBusid: ukiOpenMinor returns 13
[    22.611] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[    24.648] ukiDynamicMajor: found major device number 250
[    24.648] ukiDynamicMajor: found major device number 250
[    24.648] ukiDynamicMajor: found major device number 250
[    24.648] ukiOpenDevice: node name is /dev/ati/card0
[    24.648] ukiOpenDevice: open result is 14, (OK)
[    24.648] ukiGetBusid returned 'PCI:6:0:0'
[    24.648] ukiOpenDevice: node name is /dev/ati/card1
[    24.648] ukiOpenDevice: open result is -1, (No such device)
[    24.648] ukiOpenDevice: open result is -1, (No such device)
...
[    24.650] ukiOpenDevice: node name is /dev/ati/card15
[    24.650] ukiOpenDevice: open result is -1, (No such device)
[    24.650] ukiOpenDevice: open result is -1, (No such device)
[    24.650] ukiOpenDevice: Open failed
[    24.650] ukiDynamicMajor: found major device number 250
[    24.650] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[    24.650] ukiOpenDevice: node name is /dev/ati/card0
[    24.650] ukiOpenDevice: open result is 14, (OK)
[    24.650] ukiOpenByBusid: ukiOpenMinor returns 14
[    24.650] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[    24.704] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    24.707] ukiDynamicMajor: found major device number 250
[    24.707] ukiDynamicMajor: found major device number 250
[    24.707] ukiDynamicMajor: found major device number 250
[    24.707] ukiOpenDevice: node name is /dev/ati/card0
[    24.707] ukiOpenDevice: open result is 15, (OK)
[    24.707] ukiGetBusid returned 'PCI:6:0:0'
[    24.707] ukiOpenDevice: node name is /dev/ati/card1
[    24.707] ukiOpenDevice: open result is -1, (No such device)
[    24.707] ukiOpenDevice: open result is -1, (No such device)
[    24.707] ukiOpenDevice: Open failed
[    24.707] ukiOpenDevice: node name is /dev/ati/card2
[    24.707] ukiOpenDevice: open result is -1, (No such device)
[    24.707] ukiOpenDevice: open result is -1, (No such device)
...
[    24.709] ukiOpenDevice: node name is /dev/ati/card15
[    24.709] ukiOpenDevice: open result is -1, (No such device)
[    24.709] ukiOpenDevice: open result is -1, (No such device)
[    24.709] ukiOpenDevice: Open failed
[    24.709] ukiDynamicMajor: found major device number 250
[    24.709] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[    24.709] ukiOpenDevice: node name is /dev/ati/card0
[    24.709] ukiOpenDevice: open result is 15, (OK)
[    24.709] ukiOpenByBusid: ukiOpenMinor returns 15
[    24.709] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[    24.996] (II) fglrx(0): OverDrive5 Detected!
[    25.008] (II) fglrx(0): Setting screen physical size to 338 x 270
[    25.430] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    25.431] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.431] (II) LoadModule: "evdev"
[    25.431] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
...
[    25.508] (II) This device may have been added with another device file.
[    25.515] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments



Similar Content



How To Recover From A Botched Graphics Card Driver Install

OK,

Lastnight I decided to finally attempt to install the dedicated ATI/AMD Catylist drivers. After all I was successfull with the HP drivers, right...

No matter which grub selection I make, getting in is broken, except of course for the Windows XP Pro x64 entry, that works just fine. I'm here with you today, because of the Fedora 21 Live DVD, (slooooww).

Here is the drivers log file:

==========================================================
Supported adapter detected.
Check if system has the tools required for installation.
Uninstalling any previously installed drivers.
Unloading radeon module...
rmmod: ERROR: Module radeon is in use
Unloading drm module...
rmmod: ERROR: Module drm is in use by: ttm drm_kms_helper radeon
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Message] Kernel Module : Found kernel module build environment, generating kernel module now.
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
rm -rf *.c *.h *.o *.ko *.a .??* *.symvers
make -C /lib/modules/3.18.3-201.fc21.x86_64/build SUBDIRS=/usr/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: Entering directory '/usr/src/kernels/3.18.3-201.fc21.x86_64'
CC [M] /usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
/usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:6396:12: warning: ‘KCL_fpu_save_init’ defined but not used [-Wunused-function]
static int KCL_fpu_save_init(struct task_struct *tsk)
^
CC [M] /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o
/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.c: In function ‘KCL_ACPI_Slot_No_Hotplug’:
/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.c:845:21: error: ‘struct acpi_device_flags’ has no member named ‘no_hotplug’
tdev->flags.no_hotplug = true;
^
scripts/Makefile.build:257: recipe for target '/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o' failed
make[2]: *** [/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o] Error 1
Makefile:1385: recipe for target '_module_/usr/lib/modules/fglrx/build_mod/2.6.x' failed
make[1]: *** [_module_/usr/lib/modules/fglrx/build_mod/2.6.x] Error 2
make[1]: Leaving directory '/usr/src/kernels/3.18.3-201.fc21.x86_64'
Makefile:88: recipe for target 'kmod_build' failed
make: *** [kmod_build] Error 2
build failed with return value 2
[Error] Kernel Module : Failed to compile kernel module - please consult readme.
[Reboot] Kernel Module : dracut
==========================================================

I just rebooted without attempting to configure the card, as per the ATI/AMD warning stating that it's important to do so, because my thinking was derailed due to seeing errors, and the install program said I needed to reboot. Afterall, I just couln't believe that with a "Failed to compile kernel module" error, it would actually keep the changes I'd made, that surely Linux had a failsafe in place for such circumstances. In other words, I'm also a newbie, and just don't know how many hoops of fire one has to jump through to be at peace with linux.

Can anyone please help be get back into my install, I've already set up so many things, there's just got to be a way, right?


Thanks in Advance!


JustAnotherHuman

Install Fglrx Driver Instead The Open Source Radeon In Debian 7?

Hello, my video card "Advanced Micro Devices [AMD] nee ATI Cedar PRO [Radeon HD 5450/6350]"
create something which can be seen with dmesg "drm: registered panic notifier".
Should I install the fglrx driver instead of keeping the open source radeon as per current install?
I have antix which is a debian wheezy based system https://wiki.debian.org/ATIProprietary# ... 2Wheezy.22
Thanks for any advice before I do it.

Problem Installing Radeon Driver Packages With Second Debian Install

I have a debian OS on a partition on my hard disk (sda1).
There was no sound because the ati rs880/radeon 4200 sound card needed drivers which were only in the debian 'non-free' version'.
So I added the non-free version to my install and also had to make a change to the GRUB bootloader file.
After that, I got sound.

Now I've installed a new debian distro to my second partition - sda2.
This time I ensured I installed the debian non-free version.
But I'm having trouble installing the drivers for the sound card.

I go into Synaptic package manager to install the relevant drivers and it gives me an error message:
Code:
Configuring libfglrx - install Fglrx driver despite unsupported graphics card?

I'm not sure what that means because I want the drivers for my sound card - not graphics.
When I press the 'Help' button, it says:
Code:
This system has a graphics card which is no longer handled by the Fglrx driver...
The above card requires either the non-free legacy Fgrlx driver 
(package fgrlx-legacy-driver) or the free Radeon driver (package xserver-xorg-video-radeon).

This is fine because I can just install the 'free Radeon driver'.

But the Help message then says:
Code:
Before the Radeon driver can be used you must remove Fglrx configuration from xorg.conf 
(and xorg.conf.d/)
Note that switching to the free Radeon driver requires the fglrx-driver package to be purged (not just removed).

So now I don't know what to do. Has anyone had this error message?
I know I can enable sound and have no problems with the graphics card because that's what happened with my original install on sda1.

But with the install on sda2, I don't know how to approach this problem.
Can anyone help please?

ACPI Error At The End Of Boot; How To Delete That Error?

Hello,
know anybody how to delete that error at the end of dmesg?
If was not here before I installed the fglrx instead of the radeon driver.

Dmesg:
Code:
...
[    1.596047] Switching to clocksource tsc
[    1.631859] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.546830] udevd[345]: starting version 175
[    4.065641] microcode: CPU0 sig=0xf43, pf=0x10, revision=0x4
[    4.176993] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    4.177008] ACPI: Power Button [PBTN]
[    4.177320] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    4.177330] ACPI: Power Button [PWRF]
[    4.613393] Linux agpgart interface v0.103
[    4.626342] microcode: CPU1 sig=0xf43, pf=0x10, revision=0x4
[    4.631009] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    4.638056] intel_rng: Firmware space is locked read-only. If you can't or
[    4.638056] intel_rng: don't want to disable this in firmware setup, and if
[    4.638056] intel_rng: you are certain that your system has a functional
[    4.638056] intel_rng: RNG, try using the 'no_fwh_detect' option.
[    4.681411] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.690751] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    4.696106] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.709723] wmi: Mapper loaded
[    5.049796] iTCO_vendor_support: vendor-support=0
[    5.061788] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    5.061833] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0xf860)
[    5.062003] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.086318] snd_intel8x0 0000:00:1e.2: setting latency timer to 64
[    5.508031] intel8x0_measure_ac97_clock: measured 54792 usecs (2640 samples)
[    5.508037] intel8x0: clocking to 48000
[    6.353849] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    6.353855] Disabling lock debugging due to kernel taint
[    6.387515] <6>[fglrx] Maximum main memory to use for locked dma buffers: 2894 MBytes.
[    6.387775] <6>[fglrx]   vendor: 1002 device: 68f9 revision: 0 count: 1
[    6.388429] <6>[fglrx] ioport: bar 4, base 0x1000, size: 0x100
[    6.388842] <6>[fglrx] Kernel PAT support is enabled
[    6.388877] <6>[fglrx] module loaded - fglrx 14.50.2 [Nov 20 2014] with 1 minors
[    7.410180] EXT4-fs (sda2): re-mounted. Opts: (null)
[    7.710355] EXT4-fs (sda2): re-mounted. Opts: (null)
[    9.227365] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   10.685717] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.789404] RPC: Registered named UNIX socket transport module.
[   10.789411] RPC: Registered udp transport module.
[   10.789415] RPC: Registered tcp transport module.
[   10.789419] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   10.802294] NET: Registered protocol family 17
[   10.832966] FS-Cache: Loaded
[   10.886960] FS-Cache: Netfs 'nfs' registered for caching
[   10.951772] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   12.242071] tg3 0000:40:00.0 eth0: Link is up at 100 Mbps, full duplex
[   12.242078] tg3 0000:40:00.0 eth0: Flow control is on for TX and on for RX
[   12.242097] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   12.919842] lp: driver loaded but no devices found
[   13.211684] ppdev: user-space parallel port driver
[   20.378549] fglrx_pci 0000:06:00.0: irq 42 for MSI/MSI-X
[   20.380599] <6>[fglrx] Firegl kernel thread PID: 2736
[   20.380738] <6>[fglrx] Firegl kernel thread PID: 2737
[   20.380875] <6>[fglrx] Firegl kernel thread PID: 2738
[   20.381103] <6>[fglrx] IRQ 42 Enabled
[   20.406460] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   20.406465] <6>[fglrx] Reserved FB block: Unshared offset:f8ff000, size:3000 
[   20.406468] <6>[fglrx] Reserved FB block: Unshared offset:f902000, size:3fe000 
[   20.406472] <6>[fglrx] Reserved FB block: Unshared offset:1fff3000, size:d000 
[   20.479905] ACPI Error: [ATPX] Evaluation of object type [Mutex] is not supported (20120913/nseval-201)

Mint 17 Cinnamon Failed, Stuck In Fallback (likely Caused By Graphics Driver Install)

Hi LQ,
I am currently experiencing an issue on a fresh install of Mint 17.1 Cinnamon in which I am permanently stuck in fallback mode (that is, unless I hard shutdown or reboot) on an aging laptop with AMD Radeon HD 4200 graphics (considered legacy). I believe this issue was caused by a failed install of AMD's latest linux graphics drivers, in which I literally opened the .run file and attempted to install. The install failed (some error), of course, but when I rebooted, I was kicked into fallback. After some googling, I autoremoved fglrx then installed fglrx, as I read would reinstall fglrx, the proprietary drivers for AMD cards and rebooted. Still stuck in fallback. I removed and installed Xorg and rebooted. Still stuck in fallback. I downloaded the AMD legacy drivers from AMD's site (my card's series included with this set). Had to change the permissions to run this .run file but eventually ran it from terminal, but this install also failed (claimed I was missing tool(s), despite not indicating precisely what I was missing). I'm still rummaging around for fixes, but maybe asking can help. I can provide some more info below, but let me know what else you need (and how to get it) if you wish to help. I really want linux to work out for me instead of shelling out $$ for Windows, but so far this has been a rocky start. Thanks


Code:
inxi -G

yields
Code:
Graphics:   Card: AMD RS880M [Mobility Radeon HD 4225/4250]
X.Org: 1.15.1
drivers: fbdev,ati,radeon (unloaded: fglrx,vesa)
Resolution: 1024x768@76hz
GLX Renderer: N/A
GLX Version: N/A


Code:
lshw -C video

yields
Code:
*-display UNCLAIMED
description: VGA compatible controller
product: RS880M [Mobility Radeon HD 4225/4250]
vendor: AMD
physical id: 5
...(bunch of stuff on specs)

Have also did apt-get update and apt-get dist-upgrade.
Still no luck, let me know what you think.

Fglrx AMD Driver Troubleshooting On Ubuntu-gnome 15.04

I install fgrlx driver on vivid os the driver look like is istalled correct on system and built the necessary kernel modules because the dpkg log not report any errors, i configured the driver by simple commands like:

sudo aticonfig --initial

sudo aticonfig --screen-layout=on

i reboot the machine , but i face an strange issue the boot splash screen is hangup,i cant enter my lvm password to boot the system, i was have a chance to boot into rescue mode when boot to rescue mode the display not read by the system i try to export display by

export DISPLAY=:0

I try to configure /etc/X11/xorg.conf there is not good resaults the boot splash still hang up

I edited the grub , i uncomment "quiet splash" modified by "nomodeset"

i can boot without boot splash but im faced other issue i cant switch to virtual tty

i dont know is this a bug in the driver or in the kernel

any suggest

Generating /boot/initrd.img-3.13.0-53-generic Was Interrupted Before It Could Finish

Just did an update via terminal:

Calculating upgrade... Done
The following packages were automatically installed and are no longer required:
linux-headers-3.13.0-49 linux-headers-3.13.0-49-generic
linux-image-3.13.0-49-generic linux-image-extra-3.13.0-49-generic
Use 'apt-get autoremove' to remove them.
The following NEW packages will be installed:
fglrx-core linux-headers-3.13.0-53 linux-headers-3.13.0-53-generic
linux-image-3.13.0-53-generic linux-image-extra-3.13.0-53-generic
The following packages will be upgraded:
accountsservice apport apport-gtk fglrx fglrx-amdcccle fuse
libaccountsservice0 libfuse2 liboxideqt-qmlplugin liboxideqtcore0
liboxideqtquick0 libspice-server1 linux-firmware linux-headers-generic
linux-image-generic linux-libc-dev oxideqt-codecs-extra python3-apport
python3-problem-report
19 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
Need to get 227 MB of archives.
After this operation, 490 MB of additional disk space will be used.
Do you want to continue? [Y/n] Y

It downloaded and unpacked files, everything was automated until it asked for my input before replacing the following files:
I backed them up then chose to replace them:

DKMS: install completed.
update-initramfs: deferring update (trigger activated)
Setting up fglrx (2:15.200-0ubuntu0.3) ...

Configuration file '/etc/ati/amdpcsdb.default'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options a
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** amdpcsdb.default (Y/I/N/O/D/Z) [default=N] ? Y
Installing new version of config file /etc/ati/amdpcsdb.default ...

Configuration file '/etc/ati/atiapfxx'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options a
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** atiapfxx (Y/I/N/O/D/Z) [default=N] ? Y
Installing new version of config file /etc/ati/atiapfxx ...

Configuration file '/etc/ati/control'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options a
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** control (Y/I/N/O/D/Z) [default=N] ? ^[Y

Configuration file '/etc/ati/control'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options a
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** control (Y/I/N/O/D/Z) [default=N] ? Y
Installing new version of config file /etc/ati/control ...

Configuration file '/etc/ati/signature'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options a
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** signature (Y/I/N/O/D/Z) [default=N] ? Y
Installing new version of config file /etc/ati/signature ...

Configuration file '/etc/ati/atiapfxx.log'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options a
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** atiapfxx.log (Y/I/N/O/D/Z) [default=N] ? Y
Installing new version of config file /etc/ati/atiapfxx.log ...

Configuration file '/etc/ati/atiapfxx.blb'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options a
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** atiapfxx.blb (Y/I/N/O/D/Z) [default=N] ? Y
Installing new version of config file /etc/ati/atiapfxx.blb ...
Creating backups for the fglrx-core transition
update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group x86_64-linux-gnu_gl_conf is broken
Restoring backups for the fglrx-core transition
Setting up fglrx-amdcccle (2:15.200-0ubuntu0.3) ...
Setting up linux-firmware (1.127.12) ...
Setting up linux-headers-3.13.0-53 (3.13.0-53.89) ...
Setting up linux-headers-3.13.0-53-generic (3.13.0-53.89) ...
Examining /etc/kernel/header_postinst.d.
run-parts: executing /etc/kernel/header_postinst.d/dkms 3.13.0-53-generic /boot/vmlinuz-3.13.0-53-generic

Good news! Module version for fglrx.ko
exactly matches what is already found in kernel 3.13.0-53-generic.
DKMS will not replace this module.
You may override by specifying --force.
Setting up linux-headers-generic (3.13.0.53.60) ...
Setting up linux-image-extra-3.13.0-53-generic (3.13.0-53.89) ...
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 3.13.0-53-generic /boot/vmlinuz-3.13.0-53-generic
run-parts: executing /etc/kernel/postinst.d/dkms 3.13.0-53-generic /boot/vmlinuz-3.13.0-53-generic
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.13.0-53-generic /boot/vmlinuz-3.13.0-53-generic
update-initramfs: Generating /boot/initrd.img-3.13.0-53-generic
run-parts: executing /etc/kernel/postinst.d/pm-utils 3.13.0-53-generic /boot/vmlinuz-3.13.0-53-generic
run-parts: executing /etc/kernel/postinst.d/update-notifier 3.13.0-53-generic /boot/vmlinuz-3.13.0-53-generic
run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.13.0-53-generic /boot/vmlinuz-3.13.0-53-generic
Generating grub configuration file ...
Found theme: /boot/grub/themes/Zorin/theme.txt
Found linux image: /boot/vmlinuz-3.13.0-53-generic
Found initrd image: /boot/initrd.img-3.13.0-53-generic
Found linux image: /boot/vmlinuz-3.13.0-52-generic
Found initrd image: /boot/initrd.img-3.13.0-52-generic
Found linux image: /boot/vmlinuz-3.13.0-51-generic
Found initrd image: /boot/initrd.img-3.13.0-51-generic
Found linux image: /boot/vmlinuz-3.13.0-49-generic
Found initrd image: /boot/initrd.img-3.13.0-49-generic
Found linux image: /boot/vmlinuz-3.13.0-48-generic
Found initrd image: /boot/initrd.img-3.13.0-48-generic
Found linux image: /boot/vmlinuz-3.13.0-46-generic
Found initrd image: /boot/initrd.img-3.13.0-46-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
No volume groups found
Found Windows XP Professional x64 Edition on /dev/sda1
done
Setting up linux-image-generic (3.13.0.53.60) ...
Setting up oxideqt-codecs-extra:amd64 (1.7.8-0ubuntu0.14.04.1) ...
Setting up liboxideqtcore0:amd64 (1.7.8-0ubuntu0.14.04.1) ...
Setting up liboxideqtquick0:amd64 (1.7.8-0ubuntu0.14.04.1) ...
Setting up liboxideqt-qmlplugin:amd64 (1.7.8-0ubuntu0.14.04.1) ...
Processing triggers for libc-bin (2.19-0ubuntu6.6) ...
Processing triggers for initramfs-tools (0.103ubuntu4.2) ...
update-initramfs: Generating /boot/initrd.img-3.13.0-53-generic
W: Operation was interrupted before it could finish

Finally the error in red immediately above pops up.
I searched the net and found a site with an article dated back in 2010 that said to fix the error before rebooting or I'd probably not be able to boot to Linux.
Which I'm doing right now, I've not yet rebooted.

How should I recover from such an error before I reboot.

The site had several solutions depending upon other variables, one of which was to delete and/or re-run something. But none of the solutions seemed to fit my case.

I'm running the Zorin OS 9 Theme on top of Ubuntu 14.04 LTS, an AMD PhenomII 64bit 4 core processor on an ASUS MB. The video card is also an AMD/ATI, hence the need for the fglrx drivers listed above.

I'm not sure if the overwriting of the ATI/AMD driver config files shown above are responsible for the error or not. I did nothing that I was aware of that might have caused it, except close another instance of terminal that was runnning, and a libre office writer window.

Any ideas on how to solve this before I reboot would be greatly appreciated.

TIA

How To Know The Loading Sequence/time Of Modules During Boot?

Hello,
the "lsmod" give the list of the loaded modules/drivers.
How to know when was theier loading time (start/end) ?
Is there any existing log file where that information can be seen ?
For another topic, see http://www.linuxquestions.org/questi...ml#post5362257, I am thinking the unfinished loading of a specific module (ehci-pci or other pci driver) or the loading of a module before another one, could disturb the loading of a module e1000e during a cold boot.
Thanks a lot for any help.

Printing a bootchart? http://www.bootchart.org/images/bootchart.png
Something else?

*** ERROR: PERL Module Apache::DBI Is Not Installed !

Hello,

I am configuring OCS Server using the following two documentations:

http://wiki.centos.org/HowTos/OCSNG
http://www.howtoforge.com/how-to-ins...-on-centos-5.5

Getting below error during installaton:

""Checking for DBI PERL module...
Found that PERL module DBI is available.
Checking for Apache:BI PERL module...
*** ERROR: PERL module Apache:BI is not installed !
Checking for DBD::mysql PERL module...
Found that PERL module DBD::mysql is available.
Checking for Compress::Zlib PERL module...
Found that PERL module Compress::Zlib is available.
Checking for XML::Simple PERL module...
Found that PERL module XML::Simple is available.
Checking for Net::IP PERL module...
Found that PERL module Net::IP is available.
*** ERROR: There is one or more required PERL modules missing on your computer !
Please, install missing PERL modules first.""

i have googled for the solution unsuccessfully.
please help me in installing the missing perl module.

thanks in advance..

--
Anil Anji

Kernel Compilation Error : In "make Modules_install"

Hello all,
i'm trying to upgrade my 2.4.x to 2.6.x ( on slackware 10.0)
i've experience of compiling 2.4.x to 2.4.x.

so the final steps were..........

make bzImage
make modules
make modules_install ( now here its showing error )

last lines of "make modules"
.........
LD [M] net/sched/sch_prio.ko
CC net/sched/sch_red.mod.o
LD [M] net/sched/sch_red.ko
CC net/sched/sch_sfq.mod.o
LD [M] net/sched/sch_sfq.ko
CC net/sched/sch_tbf.mod.o
LD [M] net/sched/sch_tbf.ko
CC net/sched/sch_teql.mod.o
LD [M] net/sched/sch_teql.ko
CC net/sunrpc/sunrpc.mod.o
LD [M] net/sunrpc/sunrpc.ko
CC sound/soundcore.mod.o
LD [M] sound/soundcore.ko

root@bond:/usr/src/linux# make modules_install
ln: when making multiple links, last argument must be a directory
make: *** [_modinst_] Error 1
...............


i used the "config" from the second cd of slackware 10.0.
inside somewhere in "testing" folder.


A person asked me this

Code:
Did you upgrade your module-init-tools?
It's necessary if you go from 2.4 to 2.6

the version for it is :
Code:
root@bond:/home/bond# depmod -V
module-init-tools 3.0
root@bond:/home/bond#

so i don't think i need to upgrade it.....

now experimently i tried to upgrade witheut loading any "config"
everything worked fine in that case...

so what could be the problem.........any problem with that "config"???

if required......i can post that "config" too.

regards