Install Wireless Adapter (TP-Link Archer T4U) On Kali Virtual Machine

Trying to install software/drivers for wireless dongle on my Fedora Linux box. I have downloaded and expanded my files into my /home/me/Downloads.

In my example: /home/cjh/Downloads/LinuxDriver4Fedora_v2.5.0.3
This is where the make file is.

I run make and get an error:
"make -C /lib/modules/3.4.2-1.fc16.i686/build SUBDIRS=/home/cjh/Downloads/LinuxDriver4Fedora_v2.5.0.3/os/linux modules
make: *** /lib/modules/3.4.2-1.fc16.i686/build: No such file or directory. Stop.
make: *** [LINUX] Error 2"

The directory "/home/cjh/Downloads/LinuxDriver4Fedora_v2.5.0.3/os/linux" does exist.

What am I missing? I have run it as myself and root and get the same error.

Any assistance greatly appreciated.

TIA,

Skip

Hi @all
i try to get my wireless adapter to work on Kali Linux (3.18.0-kali3-amd64).
I read lots of post abot exactlly that topic, but none of that worked for me.

I have a D-LINK WIRELESS ADAPTER DWA-171
i even read this post right he http://ubuntuforums.org/showthread.php?t=2177333
this user seems to have the exactly the same problem with the same adapter like i have...
but for me it didnt worked.

Pls help me!!!

my lsusb outpu is:
Quote:
BUS 002 DEVICE 003: ID 2001:3314 D-LINK Corp.

Hi, I am trying to install a smartcard reader driver onto my ubuntu machine. I am not able run the make file.

The output of makefile is as follows:
Code:

amit@ubuntu:~/Downloads/Linux Driver/rts_pstor$ sudo make
sed "s/RTSX_MK_TIME/`date +%y.%m.%d.%H.%M`/" timestamp.in > timestamp.h
cp -f ./define.release ./define.h
make -C /lib/modules/3.16.0-36-generic/build SUBDIRS=/home/amit/Downloads/Linux Driver/rts_pstor modules
make[1]: Entering directory `/usr/src/linux-headers-3.16.0-36-generic'
arch/x86/Makefile:136: CONFIG_X86_X32 enabled but no binutils support
Makefile:652: Cannot use CONFIG_CC_STACKPROTECTOR_REGULAR: -fstack-protector not supported by compiler
make[1]: *** No rule to make target `Driver/rts_pstor'.  Stop.
make[1]: Leaving directory `/usr/src/linux-headers-3.16.0-36-generic'
make: *** [default] Error 2
amit@ubuntu:~/Downloads/Linux Driver/rts_pstor$

The make file for this driver is as follows:

Code:

TARGET_MODULE := rts_pstor

EXTRA_CFLAGS := -Idrivers/scsi 

obj-m += $(TARGET_MODULE).o

$(TARGET_MODULE)-objs := rtsx.o rtsx_chip.o rtsx_transport.o rtsx_scsi.o rtsx_card.o \
			 general.o sd.o xd.o ms.o spi.o

default:
	sed "s/RTSX_MK_TIME/`date +%y.%m.%d.%H.%M`/" timestamp.in > timestamp.h
	cp -f ./define.release ./define.h
	make -C /lib/modules/$(shell uname -r)/build SUBDIRS=$(shell pwd) modules
debug:
	sed "s/RTSX_MK_TIME/`date +%y.%m.%d.%H.%M`/" timestamp.in > timestamp.h
	cp -f ./define.debug ./define.h
	make -C /lib/modules/$(shell uname -r)/build SUBDIRS=$(shell pwd) modules
install:
	cp $(TARGET_MODULE).ko /lib/modules/$(shell uname -r)/kernel/drivers/scsi -f
clean:
	rm -f *.o *.ko
	rm -f $(TARGET_MODULE).mod.c

Please let me know any of your comments.

Thanks,
Amit

OK,

Lastnight I decided to finally attempt to install the dedicated ATI/AMD Catylist drivers. After all I was successfull with the HP drivers, right...

No matter which grub selection I make, getting in is broken, except of course for the Windows XP Pro x64 entry, that works just fine. I'm here with you today, because of the Fedora 21 Live DVD, (slooooww).

Here is the drivers log file:

==========================================================
Supported adapter detected.
Check if system has the tools required for installation.
Uninstalling any previously installed drivers.
Unloading radeon module...
rmmod: ERROR: Module radeon is in use
Unloading drm module...
rmmod: ERROR: Module drm is in use by: ttm drm_kms_helper radeon
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Message] Kernel Module : Found kernel module build environment, generating kernel module now.
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
rm -rf *.c *.h *.o *.ko *.a .??* *.symvers
make -C /lib/modules/3.18.3-201.fc21.x86_64/build SUBDIRS=/usr/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: Entering directory '/usr/src/kernels/3.18.3-201.fc21.x86_64'
CC [M] /usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
/usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:6396:12: warning: ‘KCL_fpu_save_init’ defined but not used [-Wunused-function]
static int KCL_fpu_save_init(struct task_struct *tsk)
^
CC [M] /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o
/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.c: In function ‘KCL_ACPI_Slot_No_Hotplug’:
/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.c:845:21: error: ‘struct acpi_device_flags’ has no member named ‘no_hotplug’
tdev->flags.no_hotplug = true;
^
scripts/Makefile.build:257: recipe for target '/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o' failed
make[2]: *** [/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o] Error 1
Makefile:1385: recipe for target '_module_/usr/lib/modules/fglrx/build_mod/2.6.x' failed
make[1]: *** [_module_/usr/lib/modules/fglrx/build_mod/2.6.x] Error 2
make[1]: Leaving directory '/usr/src/kernels/3.18.3-201.fc21.x86_64'
Makefile:88: recipe for target 'kmod_build' failed
make: *** [kmod_build] Error 2
build failed with return value 2
[Error] Kernel Module : Failed to compile kernel module - please consult readme.
[Reboot] Kernel Module : dracut
==========================================================

I just rebooted without attempting to configure the card, as per the ATI/AMD warning stating that it's important to do so, because my thinking was derailed due to seeing errors, and the install program said I needed to reboot. Afterall, I just couln't believe that with a "Failed to compile kernel module" error, it would actually keep the changes I'd made, that surely Linux had a failsafe in place for such circumstances. In other words, I'm also a newbie, and just don't know how many hoops of fire one has to jump through to be at peace with linux.

Can anyone please help be get back into my install, I've already set up so many things, there's just got to be a way, right?


Thanks in Advance!


JustAnotherHuman

Hello
I want to make CentOS-7 ISO to my pen drive.I had try this now But it not woks How to make pen drive as boot CD for centOS 7 I m using now Red Hat 6.

PHP Code:
dd if=CentOS-7-x86_64-DVD-1503-01.iso of=/dev/sdb1 


PHP Code:
/dev/sda1               495844     30604    439640   7% /boot
/dev/mapper/vg_tuhin-lv_home
                     251551508   8620468 230152956   4% /home
/dev/sdb1              4209322   4209322         0 100% /media/CentOS 7 x86_64 

Hi

I am new to kali linux and have got a fresh install with all the current updates (without any new repositories). I am really interested in aircrack and wifi exploitation. But before i can do any of that i need to install my second network adapter, the asus n53 pcie. I am able to type this because my motherboard came with its own intergrated wifi adapter, the aetheros (something). That was working out of the box as soon as kali linux was installed, however i need a proper network adapter (the n53) to make use of my 3rd party long range antenna (it can pick up networks over 600m away ).

I am attempting to install my asus n53 pcie network adapter but have had no success at all, most likely because i have no idea what to do once i have extracted the driver. Currently it is sitting in my home folder. It has a few folders and files in it, with these being the folders

(chips, common, include, os, rate_ctrl, sta and tools)

and these being the files

(iwpriv_usage.txt, makefile, readme_sta_pci, rt2860STA.dat, rt2860staCarddat, sta_ate_iwpriv_usage.txt.)

In the readme file it says this in the instructions:

1> $tar -xvzf DPB_RT2860_Linux_STA_x.x.x.x.tgz
go to "./DPB_RT2860_Linux_STA_x.x.x.x" directory.

2> In Makefile
set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
define the linux kernel source include file path LINUX_SRC
modify to meet your need.

3> In os/linux/config.mk
define the GCC and LD of the target machine
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
=> #>cd wpa_supplicant-x.x
=> #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
=> #>cd wpa_supplicant-0.5.7
=> #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d

4> $make
# compile driver source code
# To fix "error: too few arguments to function ¡¥iwe_stream_add_event"
=> $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c

5> $cp RT2860STA.dat /etc/Wireless/RT2860STA/RT2860STA.dat

6> load driver
#[kernel 2.4]
# $/sbin/insmod rt2860sta.o
# $/sbin/ifconfig ra0 inet YOUR_IP up

#[kernel 2.6]
# $/sbin/insmod rt2860sta.ko
# $/sbin/ifconfig ra0 inet YOUR_IP up

7> unload driver
$/sbin/ifconfig ra0 down
$/sbin/rmmod rt2860sta

And this to me looks like another language. I would GREATLY APPRECIATE IT if someone could give me step by step instructions on how to install this, without skipping on anything. I will even pay 10000 dogecoin if someone helps me! I have been searching youtube tutorials for 3 hours (lol) for it and havent found anything. Please help me!

Thanks

Hello

I have installed a CentOS 6.4 on VmWare.

Now, after several days of using it, it suddenly does not boots. There is a problem with its initialization, here is the error:

Kernel Panic : Unalble to init. Try passing init= option to the kernel.
Pid 1 : Swapper not tainted.

I have used CentOS.iso to rescue it, but it still does not solve it.

My grub.conf contains:

PHP Code:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE:  You have a /boot partition.  This means that
#          all kernel and initrd paths are relative to /boot/, eg.
#          root (hd0,0)
#          kernel /vmlinuz-version ro root=/dev/sda2
#          initrd /initrd-[generic-]version.img
#boot=/dev/sda
default=0
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title CentOS (2.6.32-358.el6.x86_64)
    root (hd0,0)
    kernel /vmlinuz-2.6.32-358.el6.x86_64 ro root=UUID=6082bcf5-00ba-4bf8-86ea-9821d774cb6f rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
 initrd /initramfs-2.6.32-358.el6.x86_64.img 



How should I solve it then? Thanks in advance

I have installed Linux 3.5 kernel and have compiled e2fsprogs as well. I have my own version of ext3 file system - lets say it is myfs. I have compiled myfs as well. Now I have few questions:

1.How to insert myfs module and where? When I do modprobe myfs (.ko file) it says module not found. When I simply do insmod myfs.ko it works but I am not sure where is it putting the .ko file. Also the displays I have added (on mkdir call) are not showing up (kernel debug level is also set to 8) when I try to create a directory in mounted folder

Makefile in myfs directory looks like this:

KERNEL_TREE ?= /lib/modules/$(shell uname -r)/build
PWD := $(shell pwd)

obj-m := iext3.o

iext3-objs := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \
ioctl.o namei.o super.o symlink.o hash.o resize.o ext3_jbd.o \
xattr.o xattr_user.o xattr_trusted.o acl.o xattr_security.o icefs.o \
transaction.o commit.o recovery.o checkpoint.o revoke.o journal.o

all:
make -C $(KERNEL_TREE) M=$(PWD) modules

clean:
rm -rf *.o *~ core .depend .*.cmd *.ko *.mod.c .tmp_versions *.markers *.order *.symvers

and I am compiling myfs from my own directory: /home/myname/soft/myfs.

Also, I don't see any ext2/ext3/ext4 directories in /lib/modules/linuxversion/kernel/fs/ -- not sure if this is right or wrong.

2.Mount is working fine. I can see myfs is mounted on /dev/sda3 by doing df -a. When I unmount It says - umount: /home/..../mnt: not mounted and then if I do df -a the file system is unmounted. This is strange as its unmounting but still throwing error.

Some Background: Directory where I have everything: /home/soft myfs/ mye2fs/ Linux-3.5/ mnt/

Step1: cd Linux-3.5 --> 1) make 2) make modules 3) make modules_install 4) make install 5) reboot

Step2: compile myfs (my version of ext3) and insert the myfs kernel module --> cd myfs/ --> make --> insmod myfs.ko

Step3: compiled mye2fs for mkfs

Step4: use mye2fs to create myfilesystem on a device --> mount --> test printk statements put under myfs modules

Hi folks,

I'm trying to install the drivers for my "legacy" nvidia graphics card.
I've downloaded the file from nvidia's website to install the driver, but during the process I get this message...

Kernel header file ' /lib/modules/3.13.0-37-generic/build/include/linux/version.h ' does not exist .

The most likely reason is the kernel source files in ' /lib/modules/3.13.0-37-generic/build ' have not been configured.

Anyone know how to configure this file? I've been working on this for a few days now...it's getting old!

Thanks for your help.

Joe

Hi,

Friends,

I had i problem with php compilation. When i do make install I get below error.

Code:

 make install
Installing PHP SAPI module:       apache2handler
/usr/lib/httpd/build/instdso.sh SH_LIBTOOL='/usr/lib/apr/build-1/libtool' libphp5.la /usr/lib/httpd/modules
/usr/lib/apr/build-1/libtool --mode=install install libphp5.la /usr/lib/httpd/modules/
libtool: install: install .libs/libphp5.lai /usr/lib/httpd/modules/libphp5.la
libtool: install: install .libs/libphp5.a /usr/lib/httpd/modules/libphp5.a
libtool: install: chmod 644 /usr/lib/httpd/modules/libphp5.a
libtool: install: ranlib /usr/lib/httpd/modules/libphp5.a
libtool: install: warning: remember to run `libtool --finish /usr/src/php-5.4.37/libs'
Warning!  dlname not found in /usr/lib/httpd/modules/libphp5.la.
Assuming installing a .so rather than a libtool archive.
chmod 755 /usr/lib/httpd/modules/libphp5.so
chmod: cannot access `/usr/lib/httpd/modules/libphp5.so': No such file or directory
apxs:Error: Command failed with rc=65536

I had below httpd modules install

Code:

[root@centos6php54 php-5.4.37]# rpm -qa|grep httpd|sort
httpd-2.4.12-1.i686
httpd-debuginfo-2.4.12-1.i686
httpd-devel-2.4.12-1.i686
httpd-manual-2.4.12-1.i686
httpd-tools-2.4.12-1.i686

I have below config parameters

Code:

'./configure'  '--build=i686' '--host=i686' '--target=i686' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--cache-file=../config.cache' '--with-libdir=/lib' '--with-config-file-path=/etc' '--with-config-file-scan-dir=/etc/php.d' '--disable-debug' '--with-pic' '--disable-rpath' '--without-pear' '--with-bz2' '--with-exec-dir=/usr/bin' '--with-freetype-dir=/usr' '--with-png-dir=/usr' '--with-xpm-dir=/usr' '--enable-gd-native-ttf' '--with-t1lib=/usr' '--without-gdbm' '--with-gettext' '--with-gmp' '--with-iconv' '--with-jpeg-dir=/usr' '--with-openssl' '--with-zlib' '--with-layout=GNU' '--enable-exif' '--enable-ftp' '--enable-magic-quotes' '--enable-sockets' '--enable-sysvsem' '--enable-sysvshm' '--enable-sysvmsg' '--with-kerberos' '--enable-ucd-snmp-hack' '--enable-shmop' '--enable-calendar' '--with-libxml-dir=/usr' '--enable-xml' '--with-system-tzdata' '--with-mime-magic=/usr/share/file/magic' '--enable-force-cgi-redirect' '--enable-pcntl' '--with-imap=shared' '--with-imap-ssl' '--enable-mbstring=shared' '--enable-mbregex' '--with-ncurses=shared' '--with-gd=shared' '--enable-bcmath=shared' '--enable-dba=shared' '--with-db4=/usr' '--with-xmlrpc=shared' '--with-ldap=shared' '--with-ldap-sasl' '--with-mysql=shared,/usr' '--with-mysqli=shared,/usr/bin/mysql_config' '--with-interbase=shared,/usr/lib/firebird' '--with-pdo-firebird=shared,/usr/lib/firebird' '--enable-dom=shared' '--with-pgsql=shared' '--enable-wddx=shared' '--with-snmp=shared,/usr' '--enable-soap=shared' '--with-xsl=shared,/usr' '--enable-xmlreader=shared' '--enable-xmlwriter=shared' '--with-curl=shared,/usr' '--enable-fastcgi' '--enable-pdo=shared' '--with-pdo-odbc=shared,unixODBC,/usr' '--with-pdo-mysql=shared,/usr' '--with-pdo-pgsql=shared,/usr' '--with-pdo-sqlite=shared,/usr' '--with-pdo-dblib=shared,/usr' '--with-sqlite=shared,/usr' '--enable-json=shared' '--enable-zip=shared' '--with-readline' '--enable-dbase=shared' '--with-pspell=shared' '--with-mcrypt=shared,/usr' '--with-mhash=shared,/usr' '--with-tidy=shared,/usr' '--with-mssql=shared,/usr' '--enable-sysvmsg=shared' '--enable-sysvshm=shared' '--enable-sysvsem=shared' '--enable-posix=shared' '--with-unixODBC=shared,/usr' '--with-apxs2'

apxs path

Code:

[root@centos6php54 php-5.4.37]# which apxs
/usr/bin/apxs

OS Version

Code:

[root@centos6php54 php-5.4.37]# cat /etc/issue
CentOS release 6.5 (Final)
Kernel \r on an \m

Any help will be really appreciable.

Regards,

Redssr