Erreur When Install Ns2.34

Hi everyone (i hope this is the right section)

Im trying to install the RT patch preempt_rt 3.18.9 im running Ubuntu 14.04 with kernel v 3.16

i installed the rt patch "patch-3.18.9-rt5.patch" and also a new kernel "3.18.9" i patched the patch file with

patch -p1 < patch-3.18.9.patch

but there is somthing i don't know about linking folders of old kernel and new kernel, i searched about it and found

rm -rf linux && ln -s /usr/src/linux-3.18.9 linux && cd /usr/src/linux

then

make oldconfig

then

make menuconfig

i selected Full preemptive kernel then

make

then this error

cc1: some warnings being treated as errors make[2]: * [kernel/locking/locktorture.o] Error 1 make[1]: * [kernel/locking] Error 2 make: *** [kernel] Error 2


So..... Any help?? can someone walk me through this

or any other real time patch, Thanx.. plzzzzzz

One patch will add changes to some files, say
common/packet.h queue/priqueue.h queue/priqueue.cc
tcl/lib/ns-lib.tcl tcl/lib/ns-default.tcl tcl/lib/ns-packet.tcl .

And the next patch may undo those first changes,
and even add something that conflicts with
the functions intended in the first patch.

A few patches are meant to live together.
Or at least have no conflicts.
Most others not.
-
I don't konw above. Help me

hello
i installed sumo-0.9.8 and ns-2.35 in fedora 15. i want to use TraNS.
i know that TraNS no need to install. but it needs to be configured for using ns-2.
when i use the command patch -p0 < traci.patch
the error is appeared
Quote:
[root@Fedora-15 ns-allinone-2.35]# patch -p0 < traci.patch
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|*** Makefile.in.2.29 2005-10-20 06:45:22.000000000 +0200
|--- Makefile.in 2007-09-11 13:46:57.000000000 +0200
--------------------------
File to patch: traci.patch
patching file traci.patch
Hunk #1 FAILED at 85.
Hunk #2 succeeded at 90 with fuzz 2 (offset -1 lines).
Hunk #3 succeeded at 152 with fuzz 2 (offset -2 lines).
Hunk #4 succeeded at 318 with fuzz 2 (offset -3 lines).
Hunk #5 FAILED at 345.
2 out of 5 hunks FAILED -- saving rejects to file traci.patch.rej
can't find file to patch at input line 74
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|*** common/mobilenode.h.2.31 2007-09-20 13:13:18.000000000 +0200
|--- common/mobilenode.h 2007-09-20 13:13:59.000000000 +0200
--------------------------
and when i use the command patch traci.patch
it needs too time to patch .(the traci.patch is 3kB).
what's the matter?

thanks

Hi all,

i have installed ns-2.33 and also i have ns2.31_fhmip.patch.gz. How to patch ns2.31_fhmip.patch in ns-allinone-2.33/ns-2.33

when i tried to untar
it gave me error
PHP Code:
chase@chase-desktop:~/ns-allinone-2.33/ns-2.33$ tar -zxvf ns2.31_fhmip.patch.gz 
tar: This does not look like a tar archive
tar: Skipping to next header
tar: Exiting with failure status due to previous errors 



Thanks & Regards

Pon

Hello, I started to use ns2.35 recently with Cygwin Terminal 1.7.35 under a virtual machine Windows XP Pro Service Pack 3. I'm having a problem when trying to apply a EDCA patch of 802.11e.

First i tried the oficial patch (intended for ns2.28), then i found a later version of EDCA:
Ref. post #18 he http://www.linuxquestions.org/questi...245/page2.html

I also tried to apply the patch for ns-2.35
Ref. post #70 he http://www.linuxquestions.org/questi...928/page5.html


After I made the changes in the files and running the following commands (as said by the 'README.txt' inside the patch)
./configure; make clean; make depend; make

I got the message:
Code:

g++ -c -O2 -Wall -Wno-write-strings  -DTCP_DELAY_BIND_ALL -DNO_TK -DTCLCL_CLASSINSTVAR  -DNDEBUG -DUSE_SHM -DHAVE_LIBTCLCL -DHAVE_TCLCL_H -DHAVE_LIBOTCL1_14 -DHAVE_OTCL_H -DHAVE_LIBTK8_5 -DHAVE_TK_H -DHAVE_LIBTCL8_5 -DHAVE_TCLINT_H -DHAVE_TCL_H  -DHAVE_CONFIG_H -DNS_DIFFUSION -DSMAC_NO_SYNC -DCPP_NAMESPACE=std -DUSE_SINGLE_ADDRESS_SPACE -Drng_test  -I. -I. -I/home/Administrator/ns-allinone-2.35/tclcl-1.20 -I/home/Administrator/ns-allinone-2.35/otcl -I/home/Administrator/ns-allinone-2.35/include -I/home/Administrator/ns-allinone-2.35/include -I/home/Administrator/ns-allinone-2.35/include -I/usr/include/pcap -I./tcp -I./sctp -I./common -I./link -I./queue -I./adc -I./apps -I./mac -I./mobile -I./trace -I./routing -I./tools -I./classifier -I./mcast -I./diffusion3/lib/main -I./diffusion3/lib -I./diffusion3/lib/nr -I./diffusion3/ns -I./diffusion3/filter_core -I./asim/ -I./qs -I./diffserv -I./satellite -I./wpan -I./mac/802_11e -o mac/802_11e/mac-802_11e.o mac/802_11e/mac-802_11e.cc
mac/802_11e/mac-802_11e.cc:41:20: fatal error: stream.h: No such file or directory
 #include "stream.h"
                    ^
compilation terminated.
Makefile:93: recipe for target 'mac/802_11e/mac-802_11e.o' failed
make: *** [mac/802_11e/mac-802_11e.o] Error 1

Also, the ns command (which was working before the patch) now shows me an error:
Code:

bash: ns: command not found

I've searched the ns directory and the ns executable there is no more.


Do you have any ideia how to correct this?

Thank you in advance.

Hi mates,

I am trying to patch ospf in ns-2.34 i have downloaded the patch file from link:

http://sourceforge.net/projects/ospf...s/ospf4ns2.34/

$ cd ns-allinone-2.34/
$ patch -p0 < 20-ospf4ns2.34-examples.patch

Using : $ cd ns-2.34/
# make install

$ cd tcl/ex/ospf/
$ mkdir out_ospf0 out_ospf1 out_ospf2 out_ospf3 out_ospf4 out_ospf5 out_ospf6 out_ospf7 out_ospf8 out_ospf9
$ ns ospf0.tcl

i followed the procedure from below LQ link post no #3

http://www.linuxquestions.org/questi...-a-4175492253/

it is successfully patchinf file but it is showing error when i execute ospf0.tcl file



Quote:
(TCL) Creating simulator & trace files...
(TCL) Setting up nodes and links...
(TCL) Configuring traffic objects...
(TCL) Configuring routing protocol...
invalid command name "Agent/rtProto/OSPF"
while executing
"Agent/rtProto/OSPF set helloInterval 1"
(file "ospf0.tcl" line 132)



pls anyone suggest me ideas to get rid of this err.

Thanks in Advance,

Pon

Hi all,

I am going to install PMIPv6 patch in NS-2.33. I have Fedora - 16 in my Laptop. Before installation of Patch it is asked to "install on the system binutils, gcc, g++, make, autoconf, libX11-dev, tk8.4-dev, libxmu-dev (or libxmu-headers)". Can I get help on how to install all the above in fedora 16. Please help.

Hi Everyone
i m working on ns2.35 ubuntu 12.04
when i follow these steps for olsr patching
all commands ran without error

cd ns-allinone-2.35/ns-2.35/
tar zxvf um-olsr-1.0.tgz
ln -s ./um-olsr-1.0 ./um-olsr
patch -p1 < um-olsr/um-olsr_ns-2.35_v1.0.patch

but while running the olsr.tcl
it again shows the same error
invalid command name "Agent/OLSR"
while executing
"Agent/OLSR set use_mac_ true"
(file "olsr.tcl" line 38)
please help me , thnx in advance

following error shown when i tried the command:
cd ns-allinone-2.27/ &&export CC=gcc41 CXX=g++41 && ./install


============================================================
* Testing for Cygwin environment
============================================================
Cygwin not detected, proceeding with regular install.
============================================================
* Build XGraph-12.1
============================================================
loading cache ./config.cache
checking for a BSD compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... yes
checking for working aclocal... found
checking for working autoconf... found
checking for working automake... found
checking for working autoheader... found
checking for working makeinfo... missing
checking if malloc debugging is wanted... no
checking for gcc... gcc41
checking whether the C compiler (gcc41 ) works... no
configu error: installation or configuration problem: C compiler cannot create executables.
make: *** No targets specified and no makefile found. Stop.
Can not create xgraph; But xgraph is an optional package, continuing...
============================================================
* Build CWeb
============================================================
Making cweb
gcc -g -c -o ctangle.o ctangle.c
ctangle.w:75:12: warning: conflicting types for built-in function ‘strlen’ [enabled by default]
gcc -g -DCWEBINPUTS=\"/usr/local/lib/cweb\" -c common.c
common.w:1409:12: warning: conflicting types for built-in function ‘strlen’ [enabled by default]
common.w: In function ‘fatal’:
common.w:1176:1: warning: format not a string literal and no format arguments [-Wformat-security]
gcc -g -o ctangle ctangle.o common.o
gcc -g -c -o cweave.o cweave.c
cweave.w:79:12: warning: conflicting types for built-in function ‘strlen’ [enabled by default]
cweave.w: In function ‘print_cat’:
cweave.w:1739:1: warning: format not a string literal and no format arguments [-Wformat-security]
gcc -g -o cweave cweave.o common.o
ln: failed to create symbolic link `cweave': File exists
ln: failed to create symbolic link `ctangle': File exists
============================================================
* Build Stanford GraphBase
============================================================
Making sgb
gcc41 -g -I/usr/local/sgb/include -DDATA_DIRECTORY=\"/usr/local/sgb/data/\" -c gb_io.c
make: gcc41: Command not found
make: *** [gb_io.o] Error 127
Unable to create sgb library, but it's optional, so continuing...
============================================================
* Build GT-ITM
============================================================
sgb lib not found. gt-itm & sgb2ns could not be installed. Continuing..
============================================================
* Build zlib
============================================================
Building static library libz.a version 1.1.4 with gcc41.
Checking for unistd.h... No.
Checking for errno.h... No.
Checking for mmap support... No.
gcc41 -O -DNO_ERRNO_H -c -o example.o example.c
make: gcc41: Command not found
make: *** [example.o] Error 127
Zlib make failed, but it's optional Continue ...
============================================================
* Build tcl8.4.5
============================================================
loading cache ./config.cache
checking whether to use symlinks for manpages... no
checking compression for manpages... no
checking for gcc... gcc41
checking whether the C compiler (gcc41 ) works... no
configu error: installation or configuration problem: C compiler cannot create executables.
tcl8.3.2 configuration failed! Exiting ...
Tcl is not part of the ns project. Please see www.Scriptics.com
to see if they have a fix for your platform.



please help

Hi, I need some help. I tried to install obs-ns. It´s based on ns2, but when I ran "make", the problem below appears... please I wish anybody would help me.


This is the error:

Code:

OBS/ns-2/integrated_agent.h: In constructor `BurstManager::BurstManager()':
OBS/ns-2/integrated_agent.h:86: warning: `BurstManager::bt_' will be initialized after
OBS/ns-2/integrated_agent.h:84: warning:   `int BurstManager::currburstsize_'
OBS/ns-2/integrated_agent.cc:66: warning:   when initialized here
OBS/ns-2/integrated_agent.cc: In member function `int BurstManager::nhops(nsaddr_t, nsaddr_t)':
OBS/ns-2/integrated_agent.cc:81: error: invalid conversion from `const char*' to `char*'   <------- this is the error 
OBS/ns-2/integrated_agent.cc: In member function `virtual void IPKTAgent::recv(Packet*, Handler*)':
OBS/ns-2/integrated_agent.cc:180: warning: unused variable 'ipkth'
/root/OBS/ns-allinone-2.31/tclcl-1.19/tclcl.h:150: error: `void Tcl::error(const char*)' is private
OBS/ns-2/integrated_agent.cc:185: error: within this context
OBS/ns-2/integrated_agent.cc:155: warning: unused variable 'hdr'
OBS/ns-2/integrated_agent.cc: In member function `void IPKTAgent::deBurst(Packet*)':
OBS/ns-2/integrated_agent.cc:192: warning: unused variable 'hdrip'
OBS/ns-2/integrated_agent.cc:194: warning: unused variable 'ch'
make: *** [OBS/ns-2/integrated_agent.o] Error 1

And this is the code of the program...


Code:

int BurstManager::nhops(nsaddr_t src,nsaddr_t des) {
  Tcl& tcl = Tcl::instance();
  sprintf(tcl.buffer(),"$ns nhops %d %d",src,des);
  tcl.eval();
  char *ni = tcl.result();   <------this is the line 81 
  return atoi(ni);
}