Linux Deepin

Friends,

I'm completely a Linux newbie, so explain as much as possible.

I installed Linux Deepin on dual boot(practically, triple-boot).
When I select the Linux Deepin option in bootloader, I mostly get a blank screen for a long time.
After practically 2 mins, it presents with some lines of text which I, being a newbie to Linux can't comprehend and hence, cannot counter the error.
The lines go:
"
udevadm settle - timeout of 30 seconds reached, the event queue contains:
/sys/devices/pci0000:00:1d.7/usb1(1080)
/sys/devices/pci0000:00:1d.7/usb1.1-0:1-0(1081)
up waiting for root device. Common reasons for this problem:
root args(cat /proc/cmdline)
Check rootdelay = ...[There's something here I cannot recollect at the moment]
Missing modules(cat /proc/modules; ls /dev)

ALERT! /dev/disk/by-uuid/b4b672ea-c6e5-47fe-a174-165ffde63c8 doesn't exist!
Dropped to shell!
"

Then it goes to a Ubuntu shell or something of that sort.


Surprisingly, every-time I boot into Windows and then restart my desktop and then boot to Deepin, it successfully boots in.
I have Deepin installed on external hard disk which is not very fast(just mentioned this if it is of any use.) Also, my Windows is extremely slow in booting up, it takes almost 10 mins, which is why I switched to Deepin, which boots up almost in 2 mins if it does.

Any help would be extremely appreciated.

Hi, yesterday I decided to install Deepin in a dual boot. I later decided I no longer needed/wanted it so I deleted the partition. Apparently I had grub on that partition as well, and now my laptop only goes to grub rescue and will not boot.
I have an acer aspire v5 touch. Removing the hard drive is not an option. I have tried to access UEFI but my computer just beeps and goes to grub rescue. I have grub rescue disk on a flash drive, I used unetbootin to do that, but iI cannot get to any boot menu (f12), and when I use ls (hd0)/ I get a unknown file system error. Please help, and sorry for my grammar/formatting, I'm on mobile.
Tl;dr: Deleted partition containing grub and deepin, now can only get to grub rescue, and I keep getting an unknown file system error, please help.

[root@Laptop yum.repos.d]# yum install transmission*
Loaded plugins: langpacks, refresh-packagekit
adobe-linux-x86_64 | 951 B 00:00:00
fedora/20/x86_64/metalink | 17 kB 00:00:00
fedora | 3.8 kB 00:00:00
rpmfusion-free | 3.3 kB 00:00:00
rpmfusion-free-updates | 3.3 kB 00:00:00
rpmfusion-nonfree | 3.3 kB 00:00:00
rpmfusion-nonfree-updates | 3.3 kB 00:00:00
updates/20/x86_64/metalink | 13 kB 00:00:00
updates | 4.9 kB 00:00:00
http://mirrors.xmission.com/fedora/l...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.fdcservers.net/fedora/...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://fedora.osuosl.org/linux/updat...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirrors.rit.edu/fedora/fedora...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://repo.atlantic.net/fedora/linu...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
ftp://ftp.uci.edu/mirrors/fedora/lin...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.metrocast.net/fedora/l...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://linux.mirrors.es.net/fedora/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.cs.pitt.edu/fedora/lin...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.hmc.edu/fedora/linux/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.uoregon.edu/fedora/lin...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://fedora.mirrors.tds.net/pub/fe...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.nexcess.net/fedora/upd...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.web-ster.com/fedora/up...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
ftp://ftp.gtlib.gatech.edu/pub/fedor...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://www.gtlib.gatech.edu/pub/fedo...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.steadfast.net/fedora/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirrors.cat.pdx.edu/fedora/li...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://archive.linux.duke.edu/pub/fe...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirrors.kernel.org/fedora/upd...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirrors.syringanetworks.net/f...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://lug.mtu.edu/fedora/linux/upda...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
ftp://ftp.osuosl.org/pub/fedora/linu...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.cc.vt.edu/pub/fedora/l...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.pnl.gov/fedora/linux/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.redsox.cc/pub/fedora/l...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.symnds.com/distributio...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.unl.edu/fedora/linux/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
ftp://ftp.wallawalla.edu/pub/mirrors...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://fedora.bhs.mirrors.ovh.net/li...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://dl.fedoraproject.org/pub/fedo...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.cogentco.com/pub/linux...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirrors.tummy.com/pub/fedora....ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.clarkson.edu/fedora/li...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://ftp.linux.ncsu.edu/pub/fedora...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
http://fedora.mirrors.pair.com/linux...ta/repomd.xml: [Errno 12] Timeout on http://fedora.mirrors.pair.com/linux...ta/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.ancl.hawaii.edu/linux/...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://kdeforge2.unl.edu/mirrors/fed...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.


One of the configured repositories failed (Fedora 20 - x86_64 - Updates),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:

1. Contact the upstream for the repository and get them to fix the problem.

2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).

3. Disable the repository, so yum won't use it by default. Yum will then
just ignore the repository until you permanently enable it again or use
--enablerepo for temporary usage:

yum-config-manager --disable updates

4. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:

yum-config-manager --save --setopt=updates.skip_if_unavailable=true

failu repodata/repomd.xml from updates: [Errno 256] No more mirrors to try.
http://mirrors.xmission.com/fedora/l...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.fdcservers.net/fedora/...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://fedora.osuosl.org/linux/updat...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirrors.rit.edu/fedora/fedora...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://repo.atlantic.net/fedora/linu...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
ftp://ftp.uci.edu/mirrors/fedora/lin...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.metrocast.net/fedora/l...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://linux.mirrors.es.net/fedora/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.cs.pitt.edu/fedora/lin...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.hmc.edu/fedora/linux/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.uoregon.edu/fedora/lin...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://fedora.mirrors.tds.net/pub/fe...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.nexcess.net/fedora/upd...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.web-ster.com/fedora/up...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
ftp://ftp.gtlib.gatech.edu/pub/fedor...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://www.gtlib.gatech.edu/pub/fedo...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.steadfast.net/fedora/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirrors.cat.pdx.edu/fedora/li...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://archive.linux.duke.edu/pub/fe...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirrors.kernel.org/fedora/upd...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirrors.syringanetworks.net/f...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://lug.mtu.edu/fedora/linux/upda...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
ftp://ftp.osuosl.org/pub/fedora/linu...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.cc.vt.edu/pub/fedora/l...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.pnl.gov/fedora/linux/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.redsox.cc/pub/fedora/l...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.symnds.com/distributio...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.unl.edu/fedora/linux/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
ftp://ftp.wallawalla.edu/pub/mirrors...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://fedora.bhs.mirrors.ovh.net/li...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://dl.fedoraproject.org/pub/fedo...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.cogentco.com/pub/linux...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirrors.tummy.com/pub/fedora....ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.clarkson.edu/fedora/li...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://ftp.linux.ncsu.edu/pub/fedora...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://fedora.mirrors.pair.com/linux...ta/repomd.xml: [Errno 12] Timeout on http://fedora.mirrors.pair.com/linux...ta/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
http://mirror.ancl.hawaii.edu/linux/...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://kdeforge2.unl.edu/mirrors/fed...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
[root@Laptop yum.repos.d]#

Hi Y'all,
Greetings from Snowy NC.

First post with first Linux issue.
Attempting to load Linux .iso distros (both dnlds and commercial (from mags & bought sampler cd pkg online) to see which one I want to go with.
My ACER M3011 desktop athlon 64 x2 w/2GB Mem, dsk =320GB had Vista but I can't restore any longer so I'll go Linux.
After much online research dnlded & installed Zorin Lite w/o issues. However, when attempting to boot 32bit or 64 bit versions of MINT 17.1 or DEEPIN 14.2, recvd NOT ENOUGH MEMORY FOR IMAGE msg. Installed 4 more GB ( the BIOS sees it; total 6). Same NOT ENOUGH MEMORY msg. I have searched all the threads for similar issues w/o finding any. I would appreciate suggestions on where to start.
Thank you, Robert Hall

UPDATE;; After finding suggestions on other forums have tried the trick of adding the mem=1024m, and mem=1G, and mem=4G
during the boot process. Get a whole bunch further into the kernal boot now, but always hangs at the "[7.360454] random:
nonblocking pool is initialized" line.
TIA
RH

Hi Guys,

I'm new to this community and i just have a basic Linux knowledge especialy Ubuntu+ UbuntuServer. I'm Studying IT its my last year and im working on a thesis called "Windows Vs Linux". I'm trying to setup a virtual company environment in windows and the same in Linux. I want to compare the both... what are the pros and cons from both operating systems, stability, Security, managability, TCO,... . I did some research and stuff but for the Linux part its not easy... So i have a few questions, hopefully I'm getting some response. First of all I'm thinking of using Ubuntuserver LTS as server side OS and for the workclients Mint or ubuntu. Is this a good distro choice ?

My second and i think its the hardest part of setting up a manageable Linux Company environment is an Active directory alternative that offers the same functionality in Linux. Is this possible ? Ok you have like openlDAP and stuff but thats just basic authentication password and shit, but do you have something like GPOS for Linux ?

I'm hoping someone can help me out a bit

Grtz

I try to upgrade the disto currently running in my box:

Description: Debian GNU/Linux 6.0 (squeeze)
Release: 6.0
Codename: squeeze

My sources.list looks like following:

deb http://security.debian.org/ wheezy/updates main
deb-src http://security.debian.org/ wheezy/updates main
# wheezy-updates, previously known as 'volatile'
deb http://mirrors.kernel.org/debian/ wheezy-updates main
deb-src http://mirrors.kernel.org/debian/ wheezy-updates main

After 2 commands:

aptitude update
aptitude upgrade

I have the same old good squeeze.
Help, please

yours`
sehrguey

I have a HP Compaq Presario CQ62-413NR. I have tried using many different distro's and I have the same problem. The networks will be seen and it will start to connect then it immediately gets disconnected. Tried everything on the Ubuntu forum and still nothing. The wifi works flawlessly with Windows though. The wireless card is an Atheros AR9285. I currently have Deepin Linux dual booted on my laptop with no Pro. Drivers for the card available in the settings. If anyone would like to assist me in getting this issue resolved I would greatly appreciate it. I am loving Linux OS!

I have tried searching the net to download ISOs of U-lite Linux and Fluxbuntu, but to no avail. It would be a very helpful if someone provides the needful.

Thank you,

Hello Linux users. I'm described as a newbie (which i am) but you've never seen a newbie as new as I am I'll wager.

I installed Zorin 9 OS core as an alternative to Microsoft crap that I'm really tired of, (cost as well as never vending bugs). Yes I know I'll still have bugs with linux but at least the patches and fixes in any Linux distro is for the benefit of Linux users and not to sell more Microsoft crap.

I have evidently been reasonably successful to install the latest Zorin 9 with my desktop environment choice. However I'm used to (and like) the MS so called quick launch bar at the bottom of the XP desktop installation, from which I can place links of any app or web link to instantly go there. Correct me if I'm wrong but Linux has basically the same quick launch function which I can choose from the software center and I've tried to select and install at least 2 named Cairo-dock and Docky for example. I did choose and install those according to the Linux prompts but I notice no change in the "Avant Window Navigator" at the bottom of my desktop, and when i try to drag a web link or app to that bar it either flips back to the link spot i saved on the desktop, or there's no action at all. In other words I am not able to put a link or app on the AWN, which AWN does not serve as a dock launcher at all (except for my Firefox browser icon WHICH IS INSTALLED at the left bar location and does work to quick launch Firefox when I left click on it.

So how do I not only properly install that notorious quck launch app in linux Zorin 9 OS and finally drag or otherwise install my links there?

thanks for any advice or replies.

This is the first time i've run into an issue that appear to be critical in nature, but the peculiar thing is that I have downloaded so many of these Centos 7 images (from everything iso's to dozens of mirrors), and this is a constant (when I get an image that will install)

Basic Virtual Box install, host is a windows 64 bit

Here's the first image, when I try to use yum for anything

It's probably something very obvious that im just brain farting