Need Linux Installer In Brevard NC 28712

Hi. Sorry to be so stupid, but I just managed to load and install this Linux (which I really like a lot) on my previously windows <--(bad) system.
But now I need to upgrade some software (like Adobe flash), and I have no clue how to do this. I understand I should go to my original linux distrubutor, and select software thru them (my "Linux distro").
But actually, it's been awhile since I did the install, and I dont exactly remember where I even got this distribution. (I know, I'm dumb--sorry).
Is there a way I can look at my linux system files and see who my distribution is thru, and where is their website. Or would it be easier if I just went thru the whole download and install of linux again <--(not really looking forward to that).
Or even, am I wrong about going thru the distro to do installs/upgrades?
Anything you can tell me will be greatly appreciated.

Long Live Linux !! David K

Hello,

I am looking for a live linux distro that is able to recognize more hardware by "default" without installation. For example, when I borrow a laptop/netbook, I want to be able to boot the live linux distro and be able to have wireless access to internet (at least most of the time).

I know how to get the wireless working if I have internet access to begin with, but sometimes I do not have a wired connection or am not allowed to install stuff.

I would like to try many live distros on different laptops, but it would be hard to convince other people to give me their laptops to do that; so I would really appreciate your help.

Thanks

Hello,

I'm a new Linux user (Mint 17.1 Rebecca Mate) going through the learning curve. It's a challenege. Dual boot with Windows 8.1, which provides the motivation!

I have an older Dell Dimension PC with XP. It's old and cranky, but I do love my XP. I want to wipe the hard drive and install a user friendly simple version of Linux that I can reinstall XP into as VM.
I am clueless where to even begin to figure out which version of Linux is best for this aside from the two mentioned below. The PC operatest 2.17 GHz, has 1.25 GB RAM, and a 156 GB Hard Drive.

I tried installing Zorin, both by DVD and USB, but could not get it to install or even work live. Just kept getting the F1 to retry boot, F2 for setup ingfinte loop. Spent a week trying every which way, short of a format, to install Zorin but I just refused to work, despite their excellent suopport.

Also tried every which way to install Robolinux ( all three versions), and again could not get it to install, although I was able to do the Xfce and KLDE versions live. Just went to them for support and it requires a $5 donation per case. Knowing how much supoport I could need, that could really add up.

Any advise is greatly appreciated.
TIA.
Cheers!

Hi, I am trying Android for the desktop, maybe it is testing, it is very faulty, and will not allow a reboot, instead it starts again. So on my Asus eeepc, I press the start button to turn it off, but when I press the buitton again, with a live usb in the slot, it always reboots to Android immediately, no option for choosing which device to boot from.

How can I fix this and install Fedora or Mint, which I have with me on USB sticks?

Hi everybody!

I have visited this forum a lot in the last years to learn information about Linux, so above all thank you very much to the linuxquestions.org community for building this valuable resource!

Now my question:

I have a brand new Nvidia GTX750 graphics card. Nouveau does not work correctly with this card (very low resolution and red dots all around the screen appear), so I need to install propietary drivers.

I have coped with this when installing distros in my hard drive, I just install the propietary drivers following the reccomended user guidelines and that's all, but I'm now starting to work with Tails (amnesic Linux distribution) and 'unfortunately' as it's an amnesic system I'll have to install them everytime I boot.

I was wondering if there's a way to install them permanently on my Live CD/USB so I am ready to work as soon as I boot. I have not really any clue on how a LiveUSB is composed, and as far as I have searched on the Internet I have not found any information about this matter.

Sorry for the bad grammatics, I have a pretty bad level of English

TL;DR: How can I permanently install Nvidia propietary drivers on an amnesic Linux Live CD/USB?

Regards,

tete7

I recently installed debian-7.8.0-i386-DVD-1.iso on a VirtualBox. It "live booted" just fine and then I followed the install instructions. As far as I can tell it works. ??? I dont know. here is the issue. When I tried to instal from the Add/remove software in the applications. I get a notice to load 'Debian GNU/Linux 7.8.0_Wheezy_- Official i386 DVD Binary-1' in the dvd tray, after it starts to load/install. so what is really going on there? why do I need to use this? how do I get around it. I appreciate the input. Keep in mind I have know idea about how Linux works. First time user.

Hi, does anyone know the username and password of the live Cylon linux? The Operation System locked the screen and now it requires a username and password, I honestly dont know what it is. I booted in live from a USB drive. Ill appreciate any help to solve this little problem, cheers for all Linux users!

hey folks,

I always wonder why many programs from these operating systems are not cross platform? I mean, all three are using a linux kernel.

Sometimes I would like to run a gnu/linux program on an android/chromebook device and an android/chromebook program on gnu/linux. There are a few cross platform programs that I can think of like: Firefox, google chrome browser, and Netflix.

I know very little about android's and the chromebook os's inner workings, but I do know that both have many close source apps and proprietary software and drivers.

What else is on android and the chromebook os that makes it different from gnu/linux? And why do certain companies prefer to port programs to android and the chromebook os over gnu/linux?

I have a new PC and it's my first with a UEFI motherboard. I've been using Manjaro on it for a few weeks but now I want to switch distros. Before UEFI it was easy; I'd just tell the new distro's installer to overwrite / and use the existing /home as /home. But now I have these extra partitions that Manjaro created regarding UEFI and I'm not sure how to go about it.

I just used the Linux Mint USB live disc and launched the installer. The partitioning tool showed me /bios and /EFI in addition to the other partitions that are more familiar to me, like /boot, /, /home and /swap. It would not let me alter the /bios and /EFI partitions.

In order to preserve /home. what should I tell the Mint installer to do? Should I just overwrite /boot and / as I've always done? Will it work like that on a UEFI system? Many thanks in advance for all advice.

Output of fdisk -l:

Quote:
Device Start End Sectors Size Type
/dev/sda1 2048 6143 4096 2M BIOS boot
/dev/sda2 6144 210943 204800 100M EFI System
/dev/sda3 210944 735231 524288 256M Linux filesystem (this is /boot)
/dev/sda4 735232 62175231 61440000 29.3G Linux filesystem (this is /)
/dev/sda5 62175232 1938952191 1876776960 894.9G Linux filesystem (this is /home)
/dev/sda6 1938952192 1953521663 14569472 7G Linux swap

What I need:
Linux Fedora Live CD
I also need Linux Fedora 21 (x64)
I have:
DUALBOOT.odt
i also have Windows 7 (x64)
That is why I need, "Linux Fedora Live CD"
So that I can setup dual Boot
I previously annoyed me with, "[Login/signup to post]"
At the top it says, "Welcome,Bakshara
You last visited: Today at 11:12 AM