Mobiwan Patch File In NS-2.31 For Ubuntu 12.04

My Ubuntu version is 12.04 i686 and my OS is LINUX.

I have the mobiwan that suit for NS-2.31 in Ubuntu 12.04. I have finish install and run out the result completely. The patch file for NS-2.31 mobiwan is mobiwan-1__ns231.patch that provide by Sir Knudfl.

But in mobiwan , it just contain the simple-mipv6.tcl , i want to get the HMIPv6 , FMIPv6 and FHMIPv6 tcl file that can run in mobiwan for NS-2.31.

Anyone can provide me those tcl file that suit for NS-2.31 mobiwan ?

I will be really please if you can help me in this problem. Your reply will be really appreciated.

Thank you very much in advance.

Hi everyone (i hope this is the right section)

Im trying to install the RT patch preempt_rt 3.18.9 im running Ubuntu 14.04 with kernel v 3.16

i installed the rt patch "patch-3.18.9-rt5.patch" and also a new kernel "3.18.9" i patched the patch file with

patch -p1 < patch-3.18.9.patch

but there is somthing i don't know about linking folders of old kernel and new kernel, i searched about it and found

rm -rf linux && ln -s /usr/src/linux-3.18.9 linux && cd /usr/src/linux

then

make oldconfig

then

make menuconfig

i selected Full preemptive kernel then

make

then this error

cc1: some warnings being treated as errors make[2]: * [kernel/locking/locktorture.o] Error 1 make[1]: * [kernel/locking] Error 2 make: *** [kernel] Error 2


So..... Any help?? can someone walk me through this

or any other real time patch, Thanx.. plzzzzzz

I am workin on OLSR in ns 2.35 ubuntu 14.10.

I perform all steps and install ns 2.35 and patch um-olsr-ns-2.35_v1.0.patch file after that olsr example run succesfully but problem is every example not run succesfully they showing me fatal error or any line error.

so can u tell me how to solve it

os : ubuntu 14.10 i686.

hello
i installed sumo-0.9.8 and ns-2.35 in fedora 15. i want to use TraNS.
i know that TraNS no need to install. but it needs to be configured for using ns-2.
when i use the command patch -p0 < traci.patch
the error is appeared
Quote:
[root@Fedora-15 ns-allinone-2.35]# patch -p0 < traci.patch
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|*** Makefile.in.2.29 2005-10-20 06:45:22.000000000 +0200
|--- Makefile.in 2007-09-11 13:46:57.000000000 +0200
--------------------------
File to patch: traci.patch
patching file traci.patch
Hunk #1 FAILED at 85.
Hunk #2 succeeded at 90 with fuzz 2 (offset -1 lines).
Hunk #3 succeeded at 152 with fuzz 2 (offset -2 lines).
Hunk #4 succeeded at 318 with fuzz 2 (offset -3 lines).
Hunk #5 FAILED at 345.
2 out of 5 hunks FAILED -- saving rejects to file traci.patch.rej
can't find file to patch at input line 74
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|*** common/mobilenode.h.2.31 2007-09-20 13:13:18.000000000 +0200
|--- common/mobilenode.h 2007-09-20 13:13:59.000000000 +0200
--------------------------
and when i use the command patch traci.patch
it needs too time to patch .(the traci.patch is 3kB).
what's the matter?

thanks

Hi mates,

I am trying to patch ospf in ns-2.34 i have downloaded the patch file from link:

http://sourceforge.net/projects/ospf...s/ospf4ns2.34/

$ cd ns-allinone-2.34/
$ patch -p0 < 20-ospf4ns2.34-examples.patch

Using : $ cd ns-2.34/
# make install

$ cd tcl/ex/ospf/
$ mkdir out_ospf0 out_ospf1 out_ospf2 out_ospf3 out_ospf4 out_ospf5 out_ospf6 out_ospf7 out_ospf8 out_ospf9
$ ns ospf0.tcl

i followed the procedure from below LQ link post no #3

http://www.linuxquestions.org/questi...-a-4175492253/

it is successfully patchinf file but it is showing error when i execute ospf0.tcl file



Quote:
(TCL) Creating simulator & trace files...
(TCL) Setting up nodes and links...
(TCL) Configuring traffic objects...
(TCL) Configuring routing protocol...
invalid command name "Agent/rtProto/OSPF"
while executing
"Agent/rtProto/OSPF set helloInterval 1"
(file "ospf0.tcl" line 132)



pls anyone suggest me ideas to get rid of this err.

Thanks in Advance,

Pon

Hello,
I'm new user of ns-2.I've installed the ns-2.29 and nist-ns-2.29.mob
when i tried to install the patch pmip6-for-ns-2.29-nist.patch.
I had this errors
patching file p1
Hunk #1 FAILED at 124.
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 304.
Hunk #2 FAILED at 444.
Hunk #3 FAILED at 514.
Hunk #4 FAILED at 639.
Hunk #5 FAILED at 2746.
Hunk #6 FAILED at 3251.
Hunk #7 FAILED at 3284.
Hunk #8 FAILED at 3848.
8 out of 8 hunks FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 922.
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
The next patch would create the file p1,
which already exists! Assume -R? [n] y
patching file p1
Hunk #1 FAILED at 1.
File p1 is not empty after patch, as expected
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
The next patch would create the file p1,
which already exists! Assume -R? [n] y
patching file p1
Hunk #1 FAILED at 1.
File p1 is not empty after patch, as expected
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
The next patch would create the file p1,
which already exists! Assume -R? [n] y
patching file p1
Hunk #1 FAILED at 1.
File p1 is not empty after patch, as expected
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 77.
Hunk #2 FAILED at 365.
Hunk #3 FAILED at 542.
3 out of 3 hunks FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 228.
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 177.
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 201.
Hunk #2 FAILED at 324.
2 out of 2 hunks FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 38.
Hunk #2 FAILED at 52.
Hunk #3 FAILED at 86.
Hunk #4 FAILED at 852.
Hunk #5 FAILED at 968.
5 out of 5 hunks FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 316.
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
Could anyone help me???

Hi , i desinstall ns2.34 and i want to reinstall again so i was follow your step
$ tar xvf ns-allinone-2.34.tar.gz
$ cd ns-allinone-2.34/
$ patch -p0 < lwx+LTE+dccp+MPTCP.patch
$ export CC=gcc41 CXX=g++41 && ./install

and with this patch i add another patch for wimax "wimax-awg26_ns235.patch"

but when i install ns2.34 this erreur was showen
common/packet.h: In static member function ‘static void p_info::initName()’:
common/packet.h:402: error: ‘PT_WIMAXBS’ was not declared in this scope
make: *** [common/scheduler.o] Error 1
Ns make failed!

can you tell me where is the problem ???

Hi all,

i have installed ns-2.33 and also i have ns2.31_fhmip.patch.gz. How to patch ns2.31_fhmip.patch in ns-allinone-2.33/ns-2.33

when i tried to untar
it gave me error
PHP Code:
chase@chase-desktop:~/ns-allinone-2.33/ns-2.33$ tar -zxvf ns2.31_fhmip.patch.gz 
tar: This does not look like a tar archive
tar: Skipping to next header
tar: Exiting with failure status due to previous errors 



Thanks & Regards

Pon

Hi everyone,

I want to do some simulation of CR-MAC protocols under NS2.31-CRCN patch...

I installed crcn patch in NS2.31...

There are some MAC protocols given but they seem to be incomplete...

Can anyone guide me how to do the simulations of the given MAC protocols in NS2.31 using CRCN patch?
IS there any available online simulation document of these protocols using crcn patch...


Please guide me as I need it urgently...

thanks to all and one in advance.............

Hi Everyone
i m working on ns2.35 ubuntu 12.04
when i follow these steps for olsr patching
all commands ran without error

cd ns-allinone-2.35/ns-2.35/
tar zxvf um-olsr-1.0.tgz
ln -s ./um-olsr-1.0 ./um-olsr
patch -p1 < um-olsr/um-olsr_ns-2.35_v1.0.patch

but while running the olsr.tcl
it again shows the same error
invalid command name "Agent/OLSR"
while executing
"Agent/OLSR set use_mac_ true"
(file "olsr.tcl" line 38)
please help me , thnx in advance