Hello!
TL;DR: Deleted Linux partition from Windows. Stuck at Grub rescue prompt.
I'm sorry to trouble you guys, because I'm an idiot.
So I'm wanting to dual-boot Kalilinux and Windows 8.
I went through the steps such as creating a bootable USB, changing the
boot order and so on. I get into Kali, start Gparted and try to partition stuff.
I'm far from an expert, so I wasn't sure what to do. Long-story short, I
didn't seem to get Kali installed correctly, due to something with an EFI
drive being required. So I boot into windows and then stupidly, because it said in the guide,try to "uninstall" Kali by removing it's partition, inside Win8 haha... So I did.
Now I simply get the Grub rescue command prompt when I boot from the same
USB and I have no idea how to fix it. I've run bootrec.exe/fixmbr in Windows haha,
for what it's worth. However Grub can't find any partition it says.
In windows, I have like... 2-3 Recovery partitions. Does anyone know how to remove
them??? I've tried to clear as much as I can, besides the C drive and Auxillary D drive.
Any advice would be very appreciated.
Please Help,
I have a Windows 7 and Fedora 20 dual boot pc .
Today i deleted the fedora partition from windows disk management and then restarted my pc.
Now i am stuck in the 'grub rescue > ' screen ...... It is showing 'no such partition ' , after searching through the internet i tried these commands......
grub rescue > set boot=(hd0,msdos6)
grub rescue> set prefix=(hd0,msdos6)/*boot/grub
grub rescue> insmod normal (after this line ,i am getting the error , grub rescue > unknown filesystem)
grub rescue> normal
Don't know what to do ,but i want to get back to the windows os first ,also i don't have the windows or fedora live cd . My Windows recovery is stored in my pc hard drive....... plzz help so that i can resolve this issue
Hi, yesterday I decided to install Deepin in a dual boot. I later decided I no longer needed/wanted it so I deleted the partition. Apparently I had grub on that partition as well, and now my laptop only goes to grub rescue and will not boot.
I have an acer aspire v5 touch. Removing the hard drive is not an option. I have tried to access UEFI but my computer just beeps and goes to grub rescue. I have grub rescue disk on a flash drive, I used unetbootin to do that, but iI cannot get to any boot menu (f12), and when I use ls (hd0)/ I get a unknown file system error. Please help, and sorry for my grammar/formatting, I'm on mobile.
Tl;dr: Deleted partition containing grub and deepin, now can only get to grub rescue, and I keep getting an unknown file system error, please help.
After creating a bootable usb using Universal USB Installer. I booted up the sytstem (Dell Inspiron N4110) F12 boot on usb, did the install, everything went well until after copying files and then the error message that "The grub-pc package failed to install into /target.. So i continued without a boot loader and now am trying to figure out how to get it back.
Previously i did a perfect dual boot of Kali Linux wherein the Grub boot loader was present. I did however uninstall Kali, reclaim HDD space, and even use EasyBCD to remove Grub(i believe).
Also worth noting is that before this dual boot with pignuy and after uninstalling kali linux i did a complete reinstallation of my windows 7 system using the recovery HD.
Now i would like to know how i could get grub boot loader back onto my system so that i can boot up Pinguy OS. Thanks
Hi!
I am running into a problem as stated in the title. I currently run Windows 8.1 on a Asus S300CA notebook. Not too long ago I installed and shortly after uninstalled Ubuntu 14.04 by simply deleting the partitions via Windows and recovering the original Windows Boot by running command prompt: "bootrec.exe /fixmbr" ... which consequently seemed to get rid of the grub loader.
Now I like to install Elementary Luna, but while installing the boot loader an error message pops up saying that the 'grub-efi' package fails to install into /target/.
After some research and not being able to find too much on the subject, I created an extra '/boot/grub/efi' partition of 100MB. Thereby selecting 'sda5' to mount/install the boot loader in that particular directory/partition. This has not worked and produced the same error message.
* Quick start disabled in Windows 8.1
* Running 'Try Elementary Lunar', the wifi hardware is detected but no signals are picked up, nor can I seem to connect to my landlord's router using their SSID (Just in case someone suggests doing something in the terminal requiring an internet connection.)
What to do? Your help is much appreciated.
* Edit: I just realized there is an entire forum dedicated to making Linux run on notebooks, laptops and netbooks. Mods, feel free to move this message.
I have tried installing a Ubuntu OS onto a partition (sda3).
When I had difficulties with the install, I decided to delete everything from the partition.
But now when I boot the computer, I get taken to the 'grub rescue' prompt.
I have tried to find grub in my other partitions (sda1 and sda2).
However, the command 'ls (hd0,msdos1)/' for example, does not show a grub directory.
It must've transferred grub to sda3 somehow and now I've deleted it.
I have debian live USB and am trying to install grub with:
Code:
apt-get install-grub /dev/sda
But I get the error message:
Code:
bash: grub-install: command not found
So now I don't know what's going on. Can anyone please help?
Hi All,
I recently decided to tryout Linux and dual booted my laptop (originally just had windows 8) with Xubuntu. Now I want to try out Kali Linux. So I downloaded Kali and made a bootable USB, the problem is that when I try to boot from the USB it just brings up the grub menu asking me to select Xubuntu, Windows etc. I've changed the boot menu in the BIOS but that has no effect.
I've tried booting into windows and the restarting by holding shift but when I select the usb option it just says:
"system doesn't have any USB boot option. Please select other boot option in Boot Manager Menu"
and then returns to the grub menu. I don't understand because I used a bootable usb to install xubunto?
I'd be really grateful if anyone can help me out with this!
Thanks
I've made a couple attempts at installing these OS's on my machine and am still not getting it. I've actually been using AVLinux for about the past nine months, and it's working fairly well. And, yes, I know XP is down for the count, but for the moment it's the only MS option available to me - and I *need* to get it running for some work related web stuff...
This is all on a 32 bit AMD system btw.
What I've tried: Everything on one SATA drive. Partition one formatted to NTFS (about 20GB) for XP. Partitions 2 and 3 are Root and Home for AVLinux, Partition 4 at the end of the drive as the /swap for AVL.
All the how-to's and guides I've been able to come across point to (usually) Mint or Ubuntu's install dialog, and to select "something else" - which, by the way, is not a function of AVLinux's installation procedure. During install you can install GRUB to the MBR *or* root partition..
So, just to clarify to procedure (as I might have it now, but am very unsure) XP gets installed first (which is done at this point...) then my Linux distro *to the MBR* (?) then I need to add a stanza to GRUB telling it where XP lives? XP is not showing up on GRUB as I'm doing it, but I'm not too sure if installing Linux to the MBR (on the same physical drive as XP) actually wipes out the Windows bootloader....and if so, how chainloading would actually work...
So, any help appreciated, thanks.
hiiii all
I had installed Windows 7 on /dev/sda1 and /dev/sda2 and then I installed Centos 7.
Since then I cant find Windows entry in the Grub.
And i had tried to use all kind of solution found on the net I still cant see any entry.
I had edited 40_custom script adding:
cat <<EOF
menuentry "windows 7" {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
search --no-floppy --fs-uuid --set=root FCDAE998DAE95006
chainloader +1
}
EOF
then this command grub2-mkconfig -o /boot/grub2/grub2.cfg
[root@localhost]# grub2-mkconfig -o /boot/grub2/grub2.cfg
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.10.0-123.el7.x86_64
Found initrd image: /boot/initramfs-3.10.0-123.el7.x86_64.img
Found linux image: /boot/vmlinuz-0-rescue-93890f189dec4b309c004fdce969ca5a
Found initrd image: /boot/initramfs-0-rescue-93890f189dec4b309c004fdce969ca5a.img
then this
[root@localhost]# tail -10 /boot/grub2/grub.cfg
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
[root@localhost]#
Still cant find windows in grub
please help me with this guys
thanks
Hello, i hope i created this thread in good place
I have 2 linux Xubuntu 14.04 partitions
GRUB shows only one partition, i cannot switch user to the second partition too, but file manager sees it right.
In GParted it looks like this:
http://s23.postimg.org/igpp2j1jf/Scr...5_19_08_53.png
the bigger dev/sda/1 partition is my old one which i want to boot with GRUB and use it
and /dev/sda/6 is new which i need to remove
But i cannot do this because GRUB doesn`t see /dev/sda/1, so what can i do?
My GRUB version is 2.02~beta2-9ubuntu1, i tried to update it with sudo update-grub but no effects.
Thanks for your effort
I had Kali and Linux Mint installed and erased Mint to install Centos7. Grub was totally deleted and I could only boot into grub recovery. Many hours of cussing later I got Kali back, I can see Centos filesystem mounted on my desktop and in disk utility. I never finished setting Centos up as I was rushed out the door which probably caused the problem in the first place, for some reason it's raid and although it's 2 harddrives they are not set up for raid and 1 is Kali and 1 is Centos. The Centos boot folder is still empty after running grub-install on it twice and it does not show in grub. How do I get Centos as an option?