Problem With EDCA Patch Of 802.11e For Ns2.35

Hello, I started to use ns2.35 recently with Cygwin Terminal 1.7.35 under a virtual machine Windows XP Pro Service Pack 3. I'm having a problem when trying to apply a EDCA patch of 802.11e.

First i tried the oficial patch (intended for ns2.28), then i found a later version of EDCA:
Ref. post #18 he http://www.linuxquestions.org/questi...245/page2.html

I also tried to apply the patch for ns-2.35
Ref. post #70 he http://www.linuxquestions.org/questi...928/page5.html


After I made the changes in the files and running the following commands (as said by the 'README.txt' inside the patch)
./configure; make clean; make depend; make

I got the message:
Code:
g++ -c -O2 -Wall -Wno-write-strings  -DTCP_DELAY_BIND_ALL -DNO_TK -DTCLCL_CLASSINSTVAR  -DNDEBUG -DUSE_SHM -DHAVE_LIBTCLCL -DHAVE_TCLCL_H -DHAVE_LIBOTCL1_14 -DHAVE_OTCL_H -DHAVE_LIBTK8_5 -DHAVE_TK_H -DHAVE_LIBTCL8_5 -DHAVE_TCLINT_H -DHAVE_TCL_H  -DHAVE_CONFIG_H -DNS_DIFFUSION -DSMAC_NO_SYNC -DCPP_NAMESPACE=std -DUSE_SINGLE_ADDRESS_SPACE -Drng_test  -I. -I. -I/home/Administrator/ns-allinone-2.35/tclcl-1.20 -I/home/Administrator/ns-allinone-2.35/otcl -I/home/Administrator/ns-allinone-2.35/include -I/home/Administrator/ns-allinone-2.35/include -I/home/Administrator/ns-allinone-2.35/include -I/usr/include/pcap -I./tcp -I./sctp -I./common -I./link -I./queue -I./adc -I./apps -I./mac -I./mobile -I./trace -I./routing -I./tools -I./classifier -I./mcast -I./diffusion3/lib/main -I./diffusion3/lib -I./diffusion3/lib/nr -I./diffusion3/ns -I./diffusion3/filter_core -I./asim/ -I./qs -I./diffserv -I./satellite -I./wpan -I./mac/802_11e -o mac/802_11e/mac-802_11e.o mac/802_11e/mac-802_11e.cc
mac/802_11e/mac-802_11e.cc:41:20: fatal error: stream.h: No such file or directory
 #include "stream.h"
                    ^
compilation terminated.
Makefile:93: recipe for target 'mac/802_11e/mac-802_11e.o' failed
make: *** [mac/802_11e/mac-802_11e.o] Error 1

Also, the ns command (which was working before the patch) now shows me an error:
Code:
bash: ns: command not found

I've searched the ns directory and the ns executable there is no more.


Do you have any ideia how to correct this?

Thank you in advance.


Similar Content



How To Patch OSPF In Ns2.34

Hi mates,

I am trying to patch ospf in ns-2.34 i have downloaded the patch file from link:

http://sourceforge.net/projects/ospf...s/ospf4ns2.34/

$ cd ns-allinone-2.34/
$ patch -p0 < 20-ospf4ns2.34-examples.patch

Using : $ cd ns-2.34/
# make install

$ cd tcl/ex/ospf/
$ mkdir out_ospf0 out_ospf1 out_ospf2 out_ospf3 out_ospf4 out_ospf5 out_ospf6 out_ospf7 out_ospf8 out_ospf9
$ ns ospf0.tcl

i followed the procedure from below LQ link post no #3

http://www.linuxquestions.org/questi...-a-4175492253/

it is successfully patchinf file but it is showing error when i execute ospf0.tcl file



Quote:
(TCL) Creating simulator & trace files...
(TCL) Setting up nodes and links...
(TCL) Configuring traffic objects...
(TCL) Configuring routing protocol...
invalid command name "Agent/rtProto/OSPF"
while executing
"Agent/rtProto/OSPF set helloInterval 1"
(file "ospf0.tcl" line 132)



pls anyone suggest me ideas to get rid of this err.

Thanks in Advance,

Pon

Erreur When Install Ns2.34

Hi , i desinstall ns2.34 and i want to reinstall again so i was follow your step
$ tar xvf ns-allinone-2.34.tar.gz
$ cd ns-allinone-2.34/
$ patch -p0 < lwx+LTE+dccp+MPTCP.patch
$ export CC=gcc41 CXX=g++41 && ./install

and with this patch i add another patch for wimax "wimax-awg26_ns235.patch"

but when i install ns2.34 this erreur was showen
common/packet.h: In static member function ‘static void p_info::initName()’:
common/packet.h:402: error: ‘PT_WIMAXBS’ was not declared in this scope
make: *** [common/scheduler.o] Error 1
Ns make failed!

can you tell me where is the problem ???

Error

Hi.. I was trying to patch a LEACH code on ns-2.34. During installation, I run the command 'make' and I've got some of the errors.

make[1]: Entering directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/cmu-scen-gen/setdest'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/cmu-scen-gen/setdest'
make[1]: Entering directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/dec'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/dec'
make[1]: Entering directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/epa'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/epa'
make[1]: Entering directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/nlanr'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/nlanr'
make[1]: Entering directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/ucb'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/ucb'

Please help me to solve..

os arch - i686
os - ubuntu 10.04

Ns-allinone-2.31 Make: *** [tools/random.o] Error 127

Hello,
this is my first question on this forum,hope to get a satisfactory answer.

i have ubuntu 9.10 installed on my laptop with ns-allinone-2.31.
i want to add a new module to NS2. i edited Makefile.in under
/home/ns-allinone-2.31/ns-2.31 directory. whenever i enter command
make -f Makefile.in
i get
make: *** [tools/random.o] Error 127
error.
i have gcc version 4.4.1.

i think some bug in ns-allinone-2.31 or some thing?

thanks

How To Patch Ns2.31_fhmip.patch.gz

Hi all,

i have installed ns-2.33 and also i have ns2.31_fhmip.patch.gz. How to patch ns2.31_fhmip.patch in ns-allinone-2.33/ns-2.33

when i tried to untar
it gave me error
PHP Code:
chase@chase-desktop:~/ns-allinone-2.33/ns-2.33$ tar -zxvf ns2.31_fhmip.patch.gz 
tar: This does not look like a tar archive
tar: Skipping to next header
tar: Exiting with failure status due to previous errors 



Thanks & Regards

Pon

Ns2 Project

hie

am using ns2.34
i have tried to run: make clean
:make

i got this results

for i in indep-utils/cmu-scen-gen/setdest indep-utils/webtrace-conv/dec indep-utils/webtrace-conv/epa indep-utils/webtrace-conv/nlanr indep-utils/webtrace-conv/ucb; do ( cd $i; make all; ) done
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/cmu-scen-gen/setdest'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/cmu-scen-gen/setdest'
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/dec'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/dec'
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/epa'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/epa'
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/nlanr'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/nlanr'
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/ucb'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/ucb'


running a tcl file with black hole attack i get the following error, but am not sure whats the problem excatly

num_nodes is set 33
INITIALIZE THE LIST xListHead
ns: _o171 blackhole:
(_o171 cmd line 1)
invoked from within
"_o171 cmd blackhole"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error "error when calling class $cls: $args" $..."
(procedure "_o171" line 2)
(SplitObject unknown line 2)
invoked from within
"_o171 blackhole"


give me some reference or some sites where to video tutorials, or pdf tutorials which can help me to solve this problems

i will be very grateful for response

Problem With (instalation Of?) Mysql.h On C

Hi, I've just recently installed MySQL connector/c from source code on my Slackware 14.1 x64

I read the official instructions of the connector but I felt a bit disorientated when I read:
Code:
1 -Change location to the top-level directory of the source distribution.

I interpreted that I have to go to the "highest" directory Code:
/

So I wrote: Code:
 
        #                            cd /

root@- /#                            tar xzvf /home/normal/Downloads/mysql-connector-c-6.1.6-src.tar.gz 

root@- /#                            cd /mysql-connector-c-6.1.6-src/

root@- /mysql-connector-c-6.1.6-src# cmake -G "Unix Makefiles"

root@- /mysql-connector-c-6.1.6-src# make 

root@- /mysql-connector-c-6.1.6-src# make install

Then I did:
Code:
ln -s /usr/local/mysql-5.6.25/include /usr/include

But when I try to compile a program in c with #include <mysql.h> i get this error:
Code:
# gcc ctemp.c 
In file included from ctemp.c:2:0:
/usr/include/mysql.h:57:27: fatal error: mysql_version.h: No such file or directory
 #include "mysql_version.h"
                           ^

What can I do? Thanks a lot and sorry for poor english

PD: If you need the official instructions I paste here the link: https://dev.mysql.com/doc/connector-...on-source.html

Regarding Cross Compilation Of Ntp

hi all,
I am new to cross compilation .I am trying to cross compile ntp for arm based zync soc board. so i have downloaded ntp source code version ntp-4.2.8-p2

i gave options for confiure file like this ./configure --host=arm-xilinix-linux-gnueabi --build=x86_64-pc-linux-gnu --prefix=/home/sntp CC=arm-xilinx-linux-gnueabi-gcc -with-yeilding-select=yes
configuration is succesful but when i am going for make it is throwing an error like this

cd ./html && \
../scripts/build/checkHtmlFileDates
cd . && \
./scripts/build/checkChangeLog
make all-recursive
make[1]: Entering directory `/home/SNTP/ntp-4.2.8p2'
Making all in sntp
make[2]: Entering directory `/home/SNTP/ntp-4.2.8p2/sntp'
[ ! -r ./../COPYRIGHT ] \
|| [ check-COPYRIGHT-submake -nt ./../COPYRIGHT ] \
|| make check-COPYRIGHT-submake
cd ../libntp && make libntp.a
make[3]: Entering directory `/home/sumanth/SNTP/ntp-4.2.8p2/libntp'
CC systime.o
In file included from ../include/ntp.h:14:0,
from systime.c:9:
../include/ntp_crypto.h:27:25: fatal error: openssl/evp.h: No such file or directory
#include "openssl/evp.h"
^
compilation terminated.
make[3]: *** [systime.o] Error 1
make[3]: Leaving directory `/home/sumanth/SNTP/ntp-4.2.8p2/libntp'
make[2]: *** [../libntp/libntp.a] Error 2
make[2]: Leaving directory `/home/sumanth/SNTP/ntp-4.2.8p2/sntp'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/sumanth/SNTP/ntp-4.2.8p2'
make: *** [all] Error 2

suggest me how to fix this?

Regards
sumanth

Preempt_rt Install Over Ubuntu 14.04

Hi everyone (i hope this is the right section)

Im trying to install the RT patch preempt_rt 3.18.9 im running Ubuntu 14.04 with kernel v 3.16

i installed the rt patch "patch-3.18.9-rt5.patch" and also a new kernel "3.18.9" i patched the patch file with

patch -p1 < patch-3.18.9.patch

but there is somthing i don't know about linking folders of old kernel and new kernel, i searched about it and found

rm -rf linux && ln -s /usr/src/linux-3.18.9 linux && cd /usr/src/linux

then

make oldconfig

then

make menuconfig

i selected Full preemptive kernel then

make

then this error

cc1: some warnings being treated as errors make[2]: * [kernel/locking/locktorture.o] Error 1 make[1]: * [kernel/locking] Error 2 make: *** [kernel] Error 2


So..... Any help?? can someone walk me through this

or any other real time patch, Thanx.. plzzzzzz

How To Use Static Libraries? Please Help Lol

https://code.google.com/p/wavelet1d/...ar.gz&can=2&q=

The above link is where I downloaded *.cpp(s) and the libraries.

If you "untar" the package, in "examples" directory, there are some demonstration files. What I wanted to do was to make an executable file out of "wavedemo1.cpp".

I modified the code in "wavedemo1.cpp"; Code:
#include "wavelet2d.h"

to Code:
#include "wavelet2s.h"

, then placed the header file "wavelet2s.h" (from /wavelib/src/linuxstatic) and the modified "wavedemo1.cpp" into my working directory.

Inside the working directory, I ran the following command

Code:
gcc -L/home/mario/wavelet/wavelib/linuxstatic -lwavelet2s wavedemo1.cpp -o wavedemo1

Then I get the following error messages.

/usr/bin/ld: skipping incompatible /home/mario/wavelet/wavelib/linuxstatic/libwavelet2s.a when searching for -lwavelet2s
/usr/bin/ld: cannot find -lwavelet2s
collect2: error: ld returned 1 exit status

I'm not sure what went wrong with my approach. This is my first time trying to use libraries on linux and it's giving me really tough times.

I would appreciate your help, please let me know if you need more details to explain things.

Thanks.