How To Make .bin File Of C Code

Hi!
I wrote a script shell about changing IP of the httpd.conf from text file and saving a new httpd.conf file for all IPs in the text file. The code is below, Im using mremote on windows (RHEL Release 5.7), and getting this error:
./script1.sh: line 19: syntax error: unexpected end of file

Please help me about that error. Thanks!

(ps: line 19 is the last line in the code => done < "$filename" )

#!/bin/bash

DATE='date +%Y%m%d_%H:%M:%S'
NAME=httpd_ip_change
EXTENSION=conf
max=10

filename="$1"
while read -r line

for ((i=2; i<=$max; ++i ))

do
touch $NAME$i.$EXTENSION.$DATE

sed "s/<VirtualHost 10.11.92.81:80>/$line/g" ./httpd.conf > $NAME$i.$EXTENSION.$DATE

done < "$filename"

Hello,

I am working on a board (sbc6000x with at91sam9261 micro, linux 2.6.24 to be precise) and having some fun making script i wanted to make real application.
The board is coming with a cross compilation toolchain. When trying to make a simple "hello world" executable to print on the terminal there is no problem.
I open my terminal, give the path of the compiler, cd into the folder where my .c file is and then i type :
Code:

arm-linux-gcc -o hello hello.c

Which create my executable "hello" and this one is working. But like i said, this program only played with the terminal.

The board is starting with a script calling another executable which use the lcd display, i have the source of this executable. My idea was to look at what was in the source of this application (lots of folders and files) in order to understand how it was working. I wanted to test the toolchain on the source (with the makefile) to see if i was able to generate an executable from a application with folderS/fileS but when i try to "make" it i have this error.

In my understanding this is an object file but aside from that i don't see why it would not works.

Thank you for your future answers !

hi,

Because i am cross compiling busybox for an arm board and can't install directy busybox on it (it don't have apt-get/sudo/make) i tried to compile busybox with arm-linux-gcc and "make" it in a custom directory with /usr/ /bin/ sbin/ this way i could copy paste the folder and the exe in a clean root and transfert this root to my board.

Sadly i don't seems to be able to change the installation patch.
i tried with :
Code:

make install PREFIX=/home/blabla1/blabla2/blabla3

but when going into the blabla3 folder i find no file (/usr/ /bin/ and /sbin/ are present because i created them myself).

./configure can't be used because the file don't exist.

Any idea on how i could change the installation patch ?

hello,

i am trying to make a table from some files. i used this to record how much "RD_" field i have in my file. Quote:
grep -o 'RD_' $f|grep -c 'RD_'
forexample i got 5 "RD_" fields now i want to print 5 number of fields from another file starting from 2nd field. i did it mannully like Quote:
awk 'NR==1{print"{"$2","$3","$4","$5","$6","0.0000",""0.0000""}"","}' $file
i want to make it work together and a bit auto matic like PHP Code:
awk 'NR==1{print"{"$2"to "$5"," apend zeros to make it total 7 fields"}"","}' $file 


your coments would be apreciated
thanks alot

I am trying to write a simple test script that executes a single rsync call. Once I get the syntax right, the script will be expanded to incorporate several rsync instructions to save me time.

I'm using a Cygwin Terminal on Windows 7 to run Rsync.

The script is called "backup" and I call it from the cygwin terminal using "./backup". Have used chmod to make it executable.

When I execute the rsync instruction as a standalone instruction at terminal prompt, the file copies to the target folder perfectly.

However, when I try and drop the same instruction into a script, it copies the file over from it's original file name "mvi_1840.mov" to a file with the name "." -- literally a single period. I can rename the file to a .mov file and it works fine but naturally, I don't want to have to do this.

The one other thing I will mention is that the file is located in the /home/"username" directory in cygwin vs /bin. But I would not think that this would make a difference.

I have pasted the contents of the script file below:
Code:

#!/bin/bash
    rsync.exe -rltDvP --exclude "System Volume Information" --exclude
 "RECYCLER" --exclude=\$RECYCLE.BIN --delete "/cygdrive/c/users/<USERNAME>
/desktop/mvi_1840.mov" "/cygdrive/c/users/<USERNAME>/desktop/test/"

Any help would be greatly appreciated!

Thanks

I have two files which has exact same number of lines.
I want first line of first file should be filename of new file and content of this new file should be first line of second file.
Then second line of first file should be filename of again new file and content of this new file should be second line of second file.
then third line of first file should be filename of again new file and content of this new file should be third line of second file.
and so on...
I am trying to do it using for loop but I am not able to create two for loops.
This is what I have done
Code:

IFS=$'\n'
var=$(sed 's/\"http\(.*\)\/\(.*\).wav\"\,\".*/\2/g' 1797.csv) # filenames of all files
var2=$(sed 's/\"http\(.*\)\/\(.*\).wav\"\,\"\(.*\)\"$/\3/g' 1797.csv) # contents of all files
for j in $var;
do
#Here I do not know how to use $var2
done

Please help.

Hello,

I am trying to install OCI8. I'm pretty sure the last thing I need to do is run the "./configure" command, but no matter where I try to run it, it gives me back a "file not found" or "command not found" error. I have tried this on CentOS and Fedora and always install PHP with yum. I have done many GUI searches looking through the file system for "php" and have tried to run ./configure in every php folder I can find but the command never runs. Any suggestions are very much appreciated. Thanks so much!

-Matt

P.S. Do I even need to do this if I already edited the "php.ini" file and installed OCI8 with PECL? Thanks!

hello all,

please help me with python ftplib. i was trying to copy files from my linux machine to a windows server using ftplib. everything was working good. but i'm only able to copy files from the same directory the script is. how do i copy files from a different directory? i always get "file not found error message". here's my code :

Code:

tester_name = str (socket.gethostname())
def upload(ftp, file):
    ext = os.path.splitext(file)[1]
    if ext in (".txt", ".htm", ".html"):
        ftp.storlines("STOR " + file, open(file))
    else:
        ftp.storbinary("STOR " + file, open(file, "rb"), 1024)



parse_source_path = ('/path/to/where/i/go/')
parse_source_file_list = os.listdir(parse_source_path)

ftp = ftplib.FTP("server_IP")
ftp.login("username", "pass")

folder_list = []

ftp.dir(folder_list.append)

if str(tester_name) not in str(folder_list) :
    ftp.mkd("%s"%tester_name)
    ftp.cwd("%s"%tester_name)
    for files in parse_source_file_list :
        print files
        upload(ftp, files)


else :
    print "later"

Hello

I have a text file which has blocks like
Code:

dir1/dir2/dir3/name_run_number1:
line1_run_number1_part1
line2_run_number1_part2
line3_run_number1_part3...

Each block is separated with a blank line and there is the ":" in the "header" of each one while each block carries the same "number1" after "run_" suffix
What I want to do is for each block, extract the "number1" as shown in the first line and then for the lines below count from 1-20 and give a message if a "partX" line is missing. Any bash or python would be fine

Thanks

hi all,
I am new to cross compilation .I am trying to cross compile ntp for arm based zync soc board. so i have downloaded ntp source code version ntp-4.2.8-p2

i gave options for confiure file like this ./configure --host=arm-xilinix-linux-gnueabi --build=x86_64-pc-linux-gnu --prefix=/home/sntp CC=arm-xilinx-linux-gnueabi-gcc -with-yeilding-select=yes
configuration is succesful but when i am going for make it is throwing an error like this

cd ./html && \
../scripts/build/checkHtmlFileDates
cd . && \
./scripts/build/checkChangeLog
make all-recursive
make[1]: Entering directory `/home/SNTP/ntp-4.2.8p2'
Making all in sntp
make[2]: Entering directory `/home/SNTP/ntp-4.2.8p2/sntp'
[ ! -r ./../COPYRIGHT ] \
|| [ check-COPYRIGHT-submake -nt ./../COPYRIGHT ] \
|| make check-COPYRIGHT-submake
cd ../libntp && make libntp.a
make[3]: Entering directory `/home/sumanth/SNTP/ntp-4.2.8p2/libntp'
CC systime.o
In file included from ../include/ntp.h:14:0,
from systime.c:9:
../include/ntp_crypto.h:27:25: fatal error: openssl/evp.h: No such file or directory
#include "openssl/evp.h"
^
compilation terminated.
make[3]: *** [systime.o] Error 1
make[3]: Leaving directory `/home/sumanth/SNTP/ntp-4.2.8p2/libntp'
make[2]: *** [../libntp/libntp.a] Error 2
make[2]: Leaving directory `/home/sumanth/SNTP/ntp-4.2.8p2/sntp'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/sumanth/SNTP/ntp-4.2.8p2'
make: *** [all] Error 2

suggest me how to fix this?

Regards
sumanth