Xubuntu MBR Partioning Question

UPDATED:
I installed a Deb 7 Srv w LVM w following partitions:
The end product should become a mail server (Citadel) and in time also a Web server.
Code:

 df -hT 
Filesystem                Type      Size  Used Avail Use% Mounted on
rootfs                    rootfs    322M  141M  165M  46% /
udev                      devtmpfs   10M     0   10M   0% /dev
tmpfs                     tmpfs     100M  260K  100M   1% /run
/dev/mapper/deb--srv-root ext4      322M  141M  165M  46% /
tmpfs                     tmpfs     5,0M     0  5,0M   0% /run/lock
tmpfs                     tmpfs     200M     0  200M   0% /run/shm
/dev/sda1                 ext2      228M   18M  199M   9% /boot
/dev/mapper/deb--srv-home ext4      233G  188M  221G   1% /home
/dev/mapper/deb--srv-tmp  ext4      368M   11M  339M   3% /tmp
/dev/mapper/deb--srv-usr  ext4      8,3G  481M  7,4G   6% /usr
/dev/mapper/deb--srv-var  ext4      2,8G  236M  2,4G   9% /var

 fdisk -l 
Disk /dev/sda: 268.4 GB, 268435456000 bytes
255 heads, 63 sectors/track, 32635 cylinders, total 524288000 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00064033

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048      499711      248832   83  Linux
/dev/sda2          501758   524285951   261892097    5  Extended
/dev/sda5          501760   524285951   261892096   8e  Linux LVM

Disk /dev/mapper/deb--srv-root: 348 MB, 348127232 bytes
255 heads, 63 sectors/track, 42 cylinders, total 679936 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/deb--srv-root doesn't contain a valid partition table

Disk /dev/mapper/deb--srv-swap_1: 2143 MB, 2143289344 bytes
255 heads, 63 sectors/track, 260 cylinders, total 4186112 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/deb--srv-swap_1 doesn't contain a valid partition table

Disk /dev/mapper/deb--srv-usr: 8996 MB, 8996782080 bytes
255 heads, 63 sectors/track, 1093 cylinders, total 17571840 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/deb--srv-usr doesn't contain a valid partition table

Disk /dev/mapper/deb--srv-var: 2998 MB, 2998927360 bytes
255 heads, 63 sectors/track, 364 cylinders, total 5857280 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/deb--srv-var doesn't contain a valid partition table

Disk /dev/mapper/deb--srv-tmp: 398 MB, 398458880 bytes
255 heads, 63 sectors/track, 48 cylinders, total 778240 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/deb--srv-tmp doesn't contain a valid partition table

Disk /dev/mapper/deb--srv-home: 253.3 GB, 253289824256 bytes
255 heads, 63 sectors/track, 30794 cylinders, total 494706688 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/deb--srv-home doesn't contain a valid partition table

 pvs 
PV         VG      Fmt  Attr PSize   PFree
/dev/sda5  deb-srv lvm2 a--  249,76g    0

 lvs 
LV     VG      Attr     LSize   Pool Origin Data%  Move Log Copy%  Convert
home   deb-srv -wi-ao-- 235,89g
root   deb-srv -wi-ao-- 332,00m
swap_1 deb-srv -wi-ao--   2,00g
tmp    deb-srv -wi-ao-- 380,00m
usr    deb-srv -wi-ao--   8,38g
var    deb-srv -wi-ao--   2,79g

Now i want to _shrink_ the HOME partition so I can expand my VAR partition. Looked for guides but haven't found any site useful so far

I tried to find a way to do it when I installed it but it didn't seem to offer me this at this time even I looked around for a while.

How do I do this shrinking of HOME and extending of VAR partition??
please be fairly specific as Im not a pro yet

I am running two linux web-servers. One I am just setting up. On the other, I noted the following partition:
Code:

>df -h
Filesystem                      Size  Used Avail Use Mounted on
/dev/mapper/Machinename-root     27G  4.1G   21G  17 /
udev                            996M   12K  996M   1 /dev
tmpfs                           202M  792K  201M   1% /run
none                            5.0M     0  5.0M   0% /run/lock
none                           1006M  224K 1006M   1% /run/shm
/dev/sda1                       228M   90M  126M  42% /boot
/home/Amy/.Private               27G  4.1G   21G  17% /home/Amy

But on the one that I am installing, so far I get this:
Code:

>df -h
Filesystem              Size  Used Avail Use% Mounted on
udev                    996M   12K  996M   1% /dev
tmpfs                   202M  792K  201M   1% /run
none                    5.0M     0  5.0M   0% /run/lock
none                   1006M  224K 1006M   1% /run/shm
/dev/sda1               228M   90M  126M  42% /boot

How did I get /dev/mapper partition?

As I'm sure there are other posts for this, I'm terrified to mess with disks in Linux as I'm very green. I've looked at one other post which suggests to run the following so I'm going to do the same. The drive provisioned originally had 400 gb, but currently has 500 gb allocated in vmware. Thanks so much in advance!

Code:

fdisk -l
pvs
vgs
lvs
df -h

Code:

[root@uspk10splunk ~]# fdisk -l

Disk /dev/sda: 8589 MB, 8589934592 bytes
64 heads, 32 sectors/track, 8192 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000c255c

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           2         501      512000   83  Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2             502        8192     7875584   8e  Linux LVM
Partition 2 does not end on cylinder boundary.

Disk /dev/sdb: 536.9 GB, 536870912000 bytes
255 heads, 63 sectors/track, 65270 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x69437664

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1       52216   419424988+  8e  Linux LVM

Disk /dev/mapper/vg_uspk10vsp03-lv_root: 3833 MB, 3833593856 bytes
255 heads, 63 sectors/track, 466 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/mapper/vg_uspk10vsp03-lv_swap: 4227 MB, 4227858432 bytes
255 heads, 63 sectors/track, 514 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/mapper/vg_opt-lv_opt: 429.5 GB, 429488340992 bytes
255 heads, 63 sectors/track, 52215 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Code:

[root@uspk10splunk ~]# pvs
  PV         VG             Fmt  Attr PSize   PFree
  /dev/sda2  vg_uspk10vsp03 lvm2 a--    7.51g    0
  /dev/sdb1  vg_opt         lvm2 a--  399.99g    0

Code:

[root@uspk10splunk ~]# vgs
  VG             #PV #LV #SN Attr   VSize   VFree
  vg_opt           1   1   0 wz--n- 399.99g    0
  vg_uspk10vsp03   1   2   0 wz--n-   7.51g    0

Code:

[root@uspk10splunk ~]# lvs
  LV      VG             Attr      LSize   Pool Origin Data%  Move Log Cpy%Sync                     Convert
  lv_opt  vg_opt         -wi-ao--- 399.99g                                                          
  lv_root vg_uspk10vsp03 -wi-ao---   3.57g                                                          
  lv_swap vg_uspk10vsp03 -wi-ao---   3.94g

Code:

[root@uspk10splunk ~]# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/vg_uspk10vsp03-lv_root
                      3.6G  1.5G  1.9G  45% /
tmpfs                 1.9G     0  1.9G   0% /dev/shm
/dev/mapper/vg_opt-lv_opt
                      394G  374G  422M 100% /opt
/dev/sda1             485M   32M  428M   7% /boot

I got this configuration.

fdisk -l

Disk /dev/sda: 493.9 GB, 493921239040 bytes
255 heads, 63 sectors/track, 60049 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0002ac38

Device Boot Start End Blocks Id System
/dev/sda1 * 1 64 512000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 64 32636 261630976 8e Linux LVM

Disk /dev/mapper/vg_gazduire-lv_root: 53.7 GB, 53687091200 bytes
255 heads, 63 sectors/track, 6527 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/mapper/vg_gazduire-lv_swap: 5100 MB, 5100273664 bytes
255 heads, 63 sectors/track, 620 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/mapper/vg_gazduire-lv_home: 209.1 GB, 209119608832 bytes
255 heads, 63 sectors/track, 25424 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


df -h

Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_gazduire-lv_root
50G 21G 27G 44% /
tmpfs 2.4G 0 2.4G 0% /dev/shm
/dev/sda1 485M 161M 299M 35% /boot
/dev/mapper/vg_gazduire-lv_home
192G 17G 166G 9% /home
/usr/tmpDSK 2.0G 981M 955M 51% /tmp


I want to increase the /dev/sda1 with aproximativ 200 gb who remains ! My plans a i want to make /dev/sda3 and i want to put in
vg_gazduire!

VG Name vg_gazduire
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 4
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 3
Open LV 3
Max PV 0
Cur PV 1
Act PV 1
VG Size 249.51 GiB
PE Size 4.00 MiB
Total PE 63874
Alloc PE / Size 63874 / 249.51 GiB
Free PE / Size 0 / 0



When i type fdisk /dev/sda3 the system give me Unable to open /dev/sda3!

Could anyone tell me the solution?

My real objective is to clean existing nodes from a Hadoop cluster, claim the space etc. and do a fresh installation of another distro.

Below is the space descr. of one of the master(namenode):

Code:

df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/vg00-root
                      2.0G  739M  1.2G  39% /
tmpfs                  24G     0   24G   0% /dev/shm
/dev/mapper/mpathap1  194M   65M  120M  36% /boot
/dev/mapper/vg00-home
                      248M   12M  224M   5% /home
/dev/mapper/vg00-nsr  248M   11M  226M   5% /nsr
/dev/mapper/vg00-opt  3.1G   79M  2.8G   3% /opt
/dev/mapper/vg00-itm  434M   11M  402M   3% /opt/IBM/ITM
/dev/mapper/vg00-tmp  2.0G   68M  1.9G   4% /tmp
/dev/mapper/vg00-usr  2.0G  1.6G  305M  85% /usr
/dev/mapper/vg00-usr_local
                      248M   11M  226M   5% /usr/local
/dev/mapper/vg00-var  2.0G  820M  1.1G  43% /var
/dev/mapper/vg00-FSImage
                      917G  3.3G  867G   1% /opt/hadoop-FSImage
/dev/mapper/vg00-Zookeeper
                      917G  200M  870G   1% /opt/hadoop-Zookeeper

And one of the slave(datanodes)(the others too have 4-8 local disks and some mounted NFS drives):

Code:

df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/vg00-root
                      2.0G  411M  1.5G  22% /
tmpfs                  36G     0   36G   0% /dev/shm
/dev/mapper/mpathap1  194M   67M  118M  37% /boot
/dev/mapper/vg00-home
                      248M   11M  226M   5% /home
/dev/mapper/vg00-nsr  248M   11M  226M   5% /nsr
/dev/mapper/vg00-opt  3.1G   82M  2.8G   3% /opt
/dev/mapper/vg00-itm  434M   11M  402M   3% /opt/IBM/ITM
/dev/mapper/vg00-tmp  2.0G   68M  1.9G   4% /tmp
/dev/mapper/vg00-usr  2.0G  1.2G  690M  64% /usr
/dev/mapper/vg00-usr_local
                      248M   11M  226M   5% /usr/local
/dev/mapper/vg00-var  2.0G  1.5G  392M  80% /var
/dev/mapper/vg00-00   559G   33M  559G   1% /opt/hadoop-00
/dev/mapper/vg00-01   559G   33M  559G   1% /opt/hadoop-01
/dev/mapper/vg00-02   559G   33M  559G   1% /opt/hadoop-02
/dev/mapper/vg00-03   559G   33M  559G   1% /opt/hadoop-03
/dev/mapper/vg00-04   559G   33M  559G   1% /opt/hadoop-04
/dev/mapper/vg00-05   559G   33M  559G   1% /opt/hadoop-05
/dev/mapper/vg00-06   559G   33M  559G   1% /opt/hadoop-06
/dev/mapper/vg00-07   559G   33M  559G   1% /opt/hadoop-07

During the new installation, I have run into space issues for all the nodes/hosts

Code:

Not enough disk space on host (l1032lab.se.com). A minimum of 1GB is required for "/usr" mount. A minimum of 2GB is required for "/" mount.
Not enough disk space on host (l1033lab.se.com). A minimum of 1GB is required for "/usr" mount. A minimum of 2GB is required for "/" mount.
Not enough disk space on host (l1034lab.se.com). A minimum of 1GB is required for "/usr" mount. A minimum of 2GB is required for "/" mount.
Not enough disk space on host (l1035lab.se.com). A minimum of 1GB is required for "/usr" mount. A minimum of 2GB is required for "/" mount.

Now the installation requires a lot of space under /, /usr, /var and /home mounts which on both master and the slaves is less but there is lots of space in master under these two disks:

Code:

/dev/mapper/vg00-FSImage
                      917G  200M  870G   1% /opt/hadoop-FSImage
/dev/mapper/vg00-Zookeeper
                      917G  6.5G  864G   1% /opt/hadoop-Zookeeper

and on slaves under these 8 disks.

Code:

/dev/mapper/vg00-00   559G   33M  559G   1% /opt/hadoop-00
/dev/mapper/vg00-01   559G   33M  559G   1% /opt/hadoop-01
/dev/mapper/vg00-02   559G   33M  559G   1% /opt/hadoop-02
/dev/mapper/vg00-03   559G   33M  559G   1% /opt/hadoop-03
/dev/mapper/vg00-04   559G   33M  559G   1% /opt/hadoop-04
/dev/mapper/vg00-05   559G   33M  559G   1% /opt/hadoop-05
/dev/mapper/vg00-06   559G   33M  559G   1% /opt/hadoop-06
/dev/mapper/vg00-07   559G   33M  559G   1% /opt/hadoop-07

I'm a bit confused as how to proceed - I was wondering if I can partition one or more of these disks and allocate those under /, /usr etc. and proceed with the installation but then will these disk partitioning and mounting/un-mounting corrupt the existing /, /usr etc. mounts ?

I have Linux enterprise server 11 sp3 with 3 250 GB WD blue drives in a raid 5 configuration.

Server “A” (external drive not plugged in):
Code:

Disk /dev/sda: 499.0 GB, 499021512704 bytes
255 heads, 63 sectors/track, 60669 cylinders, total 974651392 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00059fd2

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048     1028095      513024   83  Linux
/dev/sda2         1028096    21993471    10482688   82  Linux swap / Solaris
/dev/sda3        21993472   974651391   476328960   8e  Linux LVM

Disk /dev/mapper/VG_SYSTEM-ROOT: 487.8 GB, 487755612160 bytes
255 heads, 63 sectors/track, 59299 cylinders, total 952647680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/VG_SYSTEM-ROOT doesn't contain a valid partition table

I am trying to clone this machine to another server, both servers are Dell Poweredge 1900, with 3 – 250 WD drives (the only difference is the ‘B’ server has WD Cavier drives), pretty much identical machines, same processor and ram. I have a 2TB ext hard drive that I am using to store the output of DD. I have booted from the CD to a rescue system, then mounted my 2TB ext and did the following:
Code:

    # dd if=/dev/sda conv=sync,noerror bs=64k | gzip –c | split –a3 –b 2G –verbose - /mnt/exthd/

This gives me the following files on my external hard drive:
Code:

    
-rwxr-xr-x 1 root root 2147483648 Jan 10 21:00 aaa
-rwxr-xr-x 1 root root 2147483648 Jan 10 21:31 aab
-rwxr-xr-x 1 root root 2147483648 Jan 10 21:53 aac
-rwxr-xr-x 1 root root 2147483648 Jan 10 22:05 aad
-rwxr-xr-x 1 root root 2147483648 Jan 10 22:10 aae
-rwxr-xr-x 1 root root 2147483648 Jan 10 22:17 aaf
-rwxr-xr-x 1 root root 2147483648 Jan 10 22:24 aag
-rwxr-xr-x 1 root root 2147483648 Jan 10 22:31 aah
-rwxr-xr-x 1 root root 2147483648 Jan 10 22:37 aai
-rwxr-xr-x 1 root root 2147483648 Jan 10 22:43 aaj
-rwxr-xr-x 1 root root 2147483648 Jan 10 22:50 aak
-rwxr-xr-x 1 root root 2147483648 Jan 10 22:56 aal
-rwxr-xr-x 1 root root 2147483648 Jan 10 23:02 aam
-rwxr-xr-x 1 root root 2147483648 Jan 10 23:06 aan
-rwxr-xr-x 1 root root 2147483648 Jan 10 23:12 aao
-rwxr-xr-x 1 root root 2147483648 Jan 10 23:32 aap
-rwxr-xr-x 1 root root  324998512 Jan 10 23:35 aaq

Now, I boot to the rescue system on server ‘B’ with the external drive plugged in, and run fdisk:
Code:

Disk /dev/sda: 498.8 GB, 498753077248 bytes
255 heads, 63 sectors/track, 60636 cylinders, total 974127104 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00059fd2

   Device Boot      Start         End      Blocks   Id  System

Disk /dev/sdb: 2000.4 GB, 2000398933504 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029167 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00015a3d

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1            2048  3907028991  1953513472    c  W95 FAT32 (LBA)

Notice sda is only 498.8GB where on server ’A’, it was 499.0. when I try to restore my files from the DD, I get an out of space error. To restore, I use the following:
Code:

    # cat /mnt/exthd/aa* | gunzip –c | dd of=/dev/sda
    
dd: writing to ‘/dev/sda’:  No space left on device
974127105+0 records in
974127104+0 records out
498753077248 bytes (499 GB) copied, 37067.3 s, 13.5MB/s

My guess, is that although the drives are the same capacity (3 – 250GB in RAID 5 array), the number of cylinders is different because it is a different model, and that is where it is running out of space, although I wouldn’t think it would.

Please correct me if I am wrong as I am a newbie, but if I do “# dd if=/dev/sda” that will take all the partitions with it? Such as sda1, sda2, sda3 correct?

The installation of the latest stable on my Lenovo G505s went just fine in UEFI mode but when the installation finished I never reach grub during the bootup process. I put Refind media onto a usb stick and boot into my computer using it after that I tried to follow this guide https://wiki.debian.org/GrubEFIReinstall but I'm having some trouble.

When I start the computer with the "Refind media" it gives me 3 options where the first is

"Boot EFI\debian\grubx64.efi from 510 Mib Fat Volume" If I choose this option it takes me to grub via eufi(?) and then I can get into my computer as usual.

How can I make my computer understand that it should recognize and boot from EFI\debian\grubx64.efi, 510 Mib Fat Volume?

I found https://wiki.debian.org/EFIStub and since my
/boot/efi/EFI/debian looks like; grubx64.efi initrd.img-3.16.0-4-amd64 vmlinuz-3.16.0-4-amd64
I tried the following
Code:

# efibootmgr -c -g -L "Debian (EFI stub)" -l '\EFI\debian\grubx64.efi' -u 'root=UUID=$UUID ro quiet rootfstype=ext4 add_efi_memmap initrd=\\EFI\\debian\\initrd.img-3.16.0-4-amd-64'
efibootmgr: Could not set variable Boot0005: No such file or directory
efibootmgr: Could not prepare boot variable: No such file or directory

Code:

    [ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD"
    EFI boot on HDD


     apt-get install --reinstall grub-efi

went just fine and I have /dev/sda1 mounted on /boot/efi
but when I try grub-install I get

Code:

grub-install /dev/sda
Installing for x86_64-efi platform.
efibootmgr: Could not set variable Boot0005: No such file or directory
efibootmgr: Could not prepare boot variable: No such file or directory
Installation finished. No error reported.

What is going wrong here?

Code:

    update-grub
    Generating grub configuration file ...
    Found background image: .background_cache.png
    Found linux image: /boot/vmlinuz-3.16.0-4-amd64
    Found initrd image: /boot/initrd.img-3.16.0-4-amd64
    Adding boot menu entry for EFI firmware configuration
    done

Code:

file /boot/efi/EFI/debian/grubx64.efi
/boot/efi/EFI/debian/grubx64.efi: PE32+ executable (EFI application) x86-64 (stripped to external PDB), for MS Windows

but efibootmgr --verbose | grep debian gives me nothing. If I run efibootmgr without grep I get:

Code:

    efibootmgr --verbose
    BootCurrent: 0002
    Timeout: 0 seconds
    BootOrder: 2001,0003,0004,0001,0000,2002,2003
    Boot0000* USB HDD     : SanDisk U3 Cruzer Micro    BIOS(2,500,00)..................3.......1...5........................................
    Boot0001* USB ODD     : SanDisk U3 Cruzer Micro    BIOS(3,500,00)..................;.......9...=........................................
    Boot0002* EFI USB Device   ACPI(a0341d0,0)PCI(10,0)USB(2,0)0311050000HD(1,800,2d5f,55fc859c-5227-4cd5-bd64-a4fd678ba8b6)RC
    Boot0003* SATA HDD    : ST1000LM014-1EJ164                         BIOS(2,0,00).......................................................................
    Boot0004* SATA ODD    : MATSHITADVD-RAM UJ8C2                      BIOS(3,0,00).......................................................................
    Boot2001* EFI USB Device   RC
    Boot2002* EFI DVD/CDROM   RC
    Boot2003* EFI Network   RC

Here is some additonial information which might be relevant.

Code:

    # df -h
    Filesystem                 Size  Used Avail Use% Mounted on
    /dev/dm-1                  9.1G  2.5G  6.2G  29% /
    udev                        10M     0   10M   0% /dev
    tmpfs                      1.4G  9.1M  1.4G   1% /run
    tmpfs                      3.5G   68K  3.5G   1% /dev/shm
    tmpfs                      5.0M  4.0K  5.0M   1% /run/lock
    tmpfs                      3.5G     0  3.5G   0% /sys/fs/cgroup
    /dev/sda2                  237M   35M  190M  16% /boot
    /dev/sda1                  511M  132K  511M   1% /boot/efi
    /dev/mapper/ludo--vg-home  893G  103M  848G   1% /home
    tmpfs                      713M  4.0K  713M   1% /run/user/117
    tmpfs                      713M  8.0K  713M   1% /run/user/1000

Code:

fdisk -l

Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 0080BBEA-1B46-4EAE-9471-CC523BFCAD44

Device       Start        End    Sectors   Size Type
/dev/sda1     2048    1050623    1048576   512M EFI System
/dev/sda2  1050624    1550335     499712   244M Linux filesystem
/dev/sda3  1550336 1953523711 1951973376 930.8G Linux filesystem

GPT PMBR size mismatch (13695 != 2009726) will be corrected by w(rite).

Disk /dev/sdb: 981.3 MiB, 1028980224 bytes, 2009727 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: E4A93BB9-2F9C-4487-B090-91B620879E4C

Device     Start   End Sectors  Size Type
/dev/sdb1   2048 13662   11615  5.7M EFI System

Disk /dev/mapper/sda3_crypt: 930.8 GiB, 999408271360 bytes, 1951969280 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mapper/ludo--vg-root: 9.3 GiB, 9999220736 bytes, 19529728 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mapper/ludo--vg-swap_1: 14.4 GiB, 15439233024 bytes, 30154752 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mapper/ludo--vg-home: 907.1 GiB, 973967720448 bytes, 1902280704 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Actual #

Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg00-rootvol
25G 6.8G 17G 30% /
/dev/mapper/vg00-tmpvol
4.7G 594M 3.9G 14% /tmp
/dev/mapper/vg00-varvol
9.4G 907M 8.0G 10% /var
/dev/mapper/vg00-auditvol
120M 98M 17M 86% /var/log/audit
/dev/mapper/vg00-crashvol
45G 77M 43G 1% /var/crash
/dev/mapper/vg00-homevol
4.7G 44M 4.4G 1% /home
/dev/mapper/vg02-RhelRepo
9.9G 7.7G 1.7G 83% /var/repo
/dev/cciss/c0d0p1 251M 23M 216M 10% /boot
tmpfs 24G 460M 23G 2% /dev/shm
/dev/mapper/vg01-swap
46G 46G 0 100% /root/swapfile



Required #

Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg00-rootvol
25G 6.8G 17G 30% /
/dev/mapper/vg00-tmpvol
4.7G 594M 3.9G 14% /tmp
/dev/mapper/vg00-varvol
9.4G 907M 8.0G 10% /var
/dev/mapper/vg00-auditvol
120M 98M 17M 86% /var/log/audit
/dev/mapper/vg00-crashvol
45G 77M 43G 1% /var/crash
/dev/mapper/vg00-homevol
4.7G 44M 4.4G 1% /home
/dev/mapper/vg02-RhelRepo
9.9G 7.7G 1.7G 83% /var/repo
/dev/cciss/c0d0p1 251M 23M 216M 10% /boot

Command used #
df -hx tmpfs -x swap -x iso9660

why?
to exclude swap and iso9660 filesystem type.

what is required now?
Option1:
Is there a way wherein we give both the file system type with only one "-x" in the above given command?
Option2:
How to declare this as a variable in the beginning of the script? e.g. TYPE=iso9660,swap,tmpfs,etc.

I have an external disk connected to a raspberry pi to act as a nas, which I am accessing from a linux mint desktop machine.
The nas disk is 30GB, but according to my desktop machine, which connects through the file browser via samba, only around 318MB are reported as available.
If I try to copy a 400MB file it tells me there is insufficient space.
The disk is currently empty, so all 30GB should be available.

On the nas box, cfdisk seems to report the disk size and the partition size correctly:
Code:

                          cfdisk (util-linux 2.20.1)

                              Disk Drive: /dev/sda
                        Size: 30016659456 bytes, 30.0 GB
              Heads: 64   Sectors per Track: 32   Cylinders: 28626

    Name        Flags      Part Type  FS Type          [Label]        Size (MB)
 ------------------------------------------------------------------------------
    sda1        Boot        Primary   ext4                             30016.66*

I'm not sure where to look next.

hello,

i am using slackware 14.1 and my partition table is given below
Code:

 sda1                    Primary   ext4                             60003.42 
    sda2                    Primary   swap                              8998.46
    sda3                    Primary   ext4                            119998.61
                            Logical   Free Space                           0.10*
    sda5        NC          Logical   Linux                           120739.34*
    sda6        NC          Logical   ntfs                            190356.39*
                            Logical   Free Space                          11.56

and i want to change Code:

sda5        NC          Logical   Linux                           120739.34*

Logical to primary partition.i don't know how to do it.i searched over internet but i can't understand could u any body please guide me how to do it.Thanks in advance.