Help Requested On Installing Linux On An Unformatted SSD

Want to format a 1 TB Western Digital drive in an old dell 32 bit machine. Machine has Lubuntu installed and a Virtual machine on which which is loaded Windows 7 (32 bit).

Machine does not "see" the new 1 TB (SATA) drive after I physically install it in the machine.

I have other windows and Linux machines. I have some drive cradles in which I can connect to (windows) USB ports.

Is it possible to use the old Dell machine to format the new drive?

(It appears that this question has been answered before. So I will check those materials as well.)

Thanks for any assistance.

Geoffrey Wolfe

Good day everyone,

I'm currently a student and as far as I'm aware I still need windows for some program I need, but I am going over to Linux.
(Thus I'm running Windows 8 at this moment)

Today I was going to install Ubuntu 14.04.01 alongside Windows 8, everything went well till I hit the 4th step (Installation type page) of the installation:

A message like follows showed:
"This computer currently has Debian GNU/Linux (Kali Linux 1.0.7) on it. What would you like to do?"

There are then 3 options available:
1) Install Ubuntu alongside Debian GNU/Linux (Kali Linux 1.0.7)
2) Replace Debian GNU/Linux (Kali Linux 1.0.7) with Ubuntu
3 and 4 is greyed out.
5) Something else (You can create resize partitions yourself, or choose multiple partitions for Ubuntu.

I just want to make sure what option to choose, I cant afford to lose all my data and windows.

Problem: Showing Kali Linux as current OS and not Windows 8.

Possible reason for showing Kali Linux as current OS:
I have a live CD of Kali Linux and ran it a few times in the past, but according to my knowledge it shouldn't have changed anything.

Maybe the 1st option is still the right one even though the current OS isn't listed right? Or the 3rd option is like a manual setting I guess.

Thanks for the time reading and helping!

Hello All. This is my first post here. I am worse than a newbie; I'm a PC dinosaur! Not joking either.
Recently got a Dell Inspiron 3048 with Windows 8.1 pre installed. As I am a die hard XP user (my other PC is a Dell Dimension 2400), and seeing that PC's days may be numbered, I want to start using Linux, and decided Mint 17.1 would be first on the list.
Ordered a Linux Mint 17.1 boot disk and went to install it. At the option for a dual boot with Windows, I got lost, and did not understand the "other" choice versus making Linux the only OS on the PC. I wound up wiping my HDD and lost contact with Windows 8.1. Fortunately, the Dell Tech I got at Dell Support was able to walk me through getting Windows back up, but the only way I can now access Mint 17.1 is with the boot disk, but there is no set up options as it is already set up, even though incorrectly for a dual boot.
How do I wipe out Linux without losing Windows 8.1 as well so I can re install Linux and this time make the correct selection for a dual boot?
Anyone willing to respond please do so small and slow so I can follow.
TIA.
BTW, I have tried installing Zorin OS 9 Ultimate on my XP machine via DVD and USB, but I can't get past the f1/f2 loop, even though I have reconfigured my boot sequence according to the drive I'm installing from. Zorin support has been MIA on this. Anyone having a similar problem?
Cheers

Hi,

Could anyone please explain as understandable as possible how could I on my Windows 8 open either single file or install (and use) entire software which is supposted to work on Linux and/or Ubuntu? I have absolutelly NO experience with Linux and have never used it. Honestly, I don't know if there is any difference between Linux and Ubuntu. I want to be inside my Windows 8 while using Linux files/sofware. The only solution I could think of are actually two but neither of them is useful for me:

1. Vmware (i don't know how to use it)
2. Rent remote computer (vps/rdp) with linux OS installed (this would let me be in Windows 8 while being able to use Linux file/software [on remote computer] but sooner or later I would want to have Windows installed there too)

Tried program Linux Reader but didn't work on my Windows 8. Although I would need solution for installation/usage of software (that can be used only on linux/ubuntu), regardless of details***, the current problem is basically related to single files only: I have two files, both in IMG extension. Don't know how to open them because Deamon Tools doesn't handle IMG. The problem is that filesystem in one of them is "Linux" and filesystem in another is "142". The error I am getting when I try to open them is:

"File with harddrive/disc snapshot is corrupted."

But this is most likely because they are supposted to be used in linux environment, hence such question.

*** when i said "details" I was referring to basically anything: type of software, size, purpose, whether or not it needs network connection, whether or not it contains logging in (username password, etc) requirement, etc.

The following solution for current situation (quoted error above) works only partially:

http://www.sysprobs.com/simple-tip-h...thout-software

I am able to open/run/mount IMG if I do what is described on this link (im basically opening iso in this case - see the website) but when opening the virtual drive, the following error message proves that the file can be used in linux/ubuntu only:

"Windows cannot access that drive. Drive could be corrupted. Make sure the drive is in condition that can be recognized by Windows. If drive isn't formatted then format it before usage."

Would need detailed instructions, for total beginner, who has never used linux/ubuntu, what to do in such case: how to use in win8 files/software that are supposted to be used in linux/ubuntu. Also answer on how to open IMG would be highly appreciated.

Kindest regards and thank you a million in advance.

I'm very used to working on a linux machine, programing in Unix terminals all through college. That said, I have never needed to work with linux distributions or doing more than some apt-get software installation.

I need to make a CD. I need a machine to be able to boot from this CD. I would like there to be a unix terminal that runs a script automatically. This script must be able to mount an NFS drive, do simple networking (TCP/IP), and update the software on the machine running it through deleting/adding files.

I guess I need an .iso for a linux distro that has files and a script already on it that can be used to update a bunch of these specific machines?

Should I go through the LFS project in order to learn how to do this?

I'm pretty lost and need some help. Thanks!

I've made a couple attempts at installing these OS's on my machine and am still not getting it. I've actually been using AVLinux for about the past nine months, and it's working fairly well. And, yes, I know XP is down for the count, but for the moment it's the only MS option available to me - and I *need* to get it running for some work related web stuff...

This is all on a 32 bit AMD system btw.

What I've tried: Everything on one SATA drive. Partition one formatted to NTFS (about 20GB) for XP. Partitions 2 and 3 are Root and Home for AVLinux, Partition 4 at the end of the drive as the /swap for AVL.

All the how-to's and guides I've been able to come across point to (usually) Mint or Ubuntu's install dialog, and to select "something else" - which, by the way, is not a function of AVLinux's installation procedure. During install you can install GRUB to the MBR *or* root partition..

So, just to clarify to procedure (as I might have it now, but am very unsure) XP gets installed first (which is done at this point...) then my Linux distro *to the MBR* (?) then I need to add a stanza to GRUB telling it where XP lives? XP is not showing up on GRUB as I'm doing it, but I'm not too sure if installing Linux to the MBR (on the same physical drive as XP) actually wipes out the Windows bootloader....and if so, how chainloading would actually work...

So, any help appreciated, thanks.

I am installing Linuc Mint Rebecca on this computer: CPU: I7, motherboard: ASUS X99-A, HD: 2x 2TB, motherboard BIOS RAID1, so the total hard drive size is 2TB

While I was installing LINUX MINT on RAID1 hard drive, the installation system pop up ??? ???windows at Wher Are You step, after I click OK, jump to Installation Type, no matter which type I select: Erase disk and install Linux Mint or Someting else, ??? error message pop up at Where are you.

And if I click either of the two disk, it shows "Unable to mount location"

however, I can double click and see the content of RAID1 2TB disk.

Question: what's the problem of LINUX MINT installation on RAID1?

Hello, My issue is very common but, not able to resolve it.

Issue I am facing with my Linux (RHEL-5 32-bit) machine, where I am not able to connect to internet.

DWR-113 - D-Link Router is configured for 3G dongle (Vodafone India) - This setup is done via WiFi and not using the provided LAN cable from Win7 machine.

Internet is working absolutely fine in case of Wireless but, at same time when LAN cable is used internet is not working. [Able to ping to Router IP i.e. 192.168.0.1)

Similarly, from Linux box, ping to Router IP is working [LAN plugged] but, Internet not working. IP of linux machine: 192.168.0.60

Also, able to get the console connection of Linux from Windows box..[Windows connected to Router via WiFi and Linux connected to Router via LAN cable]

Please suggest how to get rid of this problem so that Internet will work on Linux via LAN cable.

Many Thanks,

Hi all,
I am brand new to Linux, playing around a bit with different things to see how I can use it in the future. Here is my problem:

I have written a simple program in Ada that works well on windows. It opens a TCP port (20000) and listens for incoming connections. I tried it on my internal network and it works well. I can connect from other windows machines and even from my Linux machine.

Now I moved the program to Linux and compiled it there. It starts ok and then listens for the connections. I can connect to it from that same Linux machine but not from any other machine on my network.

I checked the firewall status on Linux with ufw status and it is disabled. I also tried to add a rule to the iptables with
iptables -A INPUT -p tcp --dport 20000 -j ACCEPT

but still nothing. I can not connect from another machine on my network. I also tried to open a simple telnet connection from a windows machine and that too is blocked. I thought without the firewall all incoming connections would be allowed but obviously something is not working as I thought.

Any help would be greatly appreciated

I have a computer that I made myself a few years ago. The internal DVD drive does not work anymore. What are my options to install a linux distro on it. I am not able to boot from an external USB DVD drive that I have, on this machine. My understanding is that you need a CD to install Plop to inorder for it to work so that I can boot from an external USB stick?

What are my options without having to buy another DVD drive? I know I can install my .iso file to a USB stick using Unetbootin, but than what? How do I get it to boot on this machine?

Thanks!!!