Can Somebody help me out by giving me step by step instructions on uninstalling Aircrack-ng 1.2 RC 2 and reinstalling Aircrack-ng 1.2 RC 1? including where to download Aircrack-ng 1.2 RC 1. I am using Kali Linux in VMware Player
Thanks in advance.
Hi,
Previously I had installed VMware Player 6.0.1 with Kali 1.0.6 without any issues. I decided to upgrade both with a clean install to VMware Player 6.0.2 with Kali 1.0.7. Now Kali freezes on me a couple of times a day. When it freezes the light on my caps lock blinks and the only way I can get out is to close VMware Player. Is anybody able to give me some advice on how to fix this. I have reinstalled these again but the same thing. I am a newbie so be gentle.
Hi
I am new to kali linux and have got a fresh install with all the current updates (without any new repositories). I am really interested in aircrack and wifi exploitation. But before i can do any of that i need to install my second network adapter, the asus n53 pcie. I am able to type this because my motherboard came with its own intergrated wifi adapter, the aetheros (something). That was working out of the box as soon as kali linux was installed, however i need a proper network adapter (the n53) to make use of my 3rd party long range antenna (it can pick up networks over 600m away ).
I am attempting to install my asus n53 pcie network adapter but have had no success at all, most likely because i have no idea what to do once i have extracted the driver. Currently it is sitting in my home folder. It has a few folders and files in it, with these being the folders
(chips, common, include, os, rate_ctrl, sta and tools)
and these being the files
(iwpriv_usage.txt, makefile, readme_sta_pci, rt2860STA.dat, rt2860staCarddat, sta_ate_iwpriv_usage.txt.)
In the readme file it says this in the instructions:
1> $tar -xvzf DPB_RT2860_Linux_STA_x.x.x.x.tgz
go to "./DPB_RT2860_Linux_STA_x.x.x.x" directory.
2> In Makefile
set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
define the linux kernel source include file path LINUX_SRC
modify to meet your need.
3> In os/linux/config.mk
define the GCC and LD of the target machine
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
=> #>cd wpa_supplicant-x.x
=> #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
=> #>cd wpa_supplicant-0.5.7
=> #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d
4> $make
# compile driver source code
# To fix "error: too few arguments to function ”„iwe_stream_add_event"
=> $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c
5> $cp RT2860STA.dat /etc/Wireless/RT2860STA/RT2860STA.dat
6> load driver
#[kernel 2.4]
# $/sbin/insmod rt2860sta.o
# $/sbin/ifconfig ra0 inet YOUR_IP up
#[kernel 2.6]
# $/sbin/insmod rt2860sta.ko
# $/sbin/ifconfig ra0 inet YOUR_IP up
7> unload driver
$/sbin/ifconfig ra0 down
$/sbin/rmmod rt2860sta
And this to me looks like another language. I would GREATLY APPRECIATE IT if someone could give me step by step instructions on how to install this, without skipping on anything. I will even pay 10000 dogecoin if someone helps me! I have been searching youtube tutorials for 3 hours (lol) for it and havent found anything. Please help me!
Thanks
So I'm on the last step of this article to run vmware-install.pl to start installation of my VMware tools and I'm getting this error.
[root@LinuxTest01 vmware-tools-distrib]# ./vmware-install.pl
-bash: ./vmware-install.pl: /usr/bin/perl: bad interpreter: No such file or directory.
I do a ls in the directory and it shows the installer in there.
[root@LinuxTest01 vmware-tools-distrib]# ls
bin doc etc FILES INSTALL installer lib vmware-install.pl
The only step I didnt do in this article is the prereq. first step because Yum is always trying to connect to the internet and my Centos 7 box is on a classified network with no internet access.
http://www.ehowstuff.com/how-to-inst...hel-7centos-7/
My lovely 2and 3 year old got onto our laptop and crashed the thing my boyfriend was able to do a reset on it however the flash player on it is now playing in fast forward he has just uninstalling and reinstalling flash as well as changing a number of setting so on and so forth ... Any suggestions?
I have a problem on the paper feed side and I need to partially dismantle the machine to fix it.....does anyone have step by step instructions on dismantling the machine from the top down? I'm told it's fairly easy but all hidden screws and clips - where are they all? Any help will be greatly appreciated. many thanks.
i recently installed mint 17.1, i dislike it as i was a windows user :/ could someone help me get back to windows please. i did not dual boot, ive tried deleteing partitions but failed. pure newbie here no experience with linux. im not really stupid though, but if someone could do a step by step instruction it would help massively. THANK YOU !!!
Good day everyone,
I'm currently a student and as far as I'm aware I still need windows for some program I need, but I am going over to Linux.
(Thus I'm running Windows 8 at this moment)
Today I was going to install Ubuntu 14.04.01 alongside Windows 8, everything went well till I hit the 4th step (Installation type page) of the installation:
A message like follows showed:
"This computer currently has Debian GNU/Linux (Kali Linux 1.0.7) on it. What would you like to do?"
There are then 3 options available:
1) Install Ubuntu alongside Debian GNU/Linux (Kali Linux 1.0.7)
2) Replace Debian GNU/Linux (Kali Linux 1.0.7) with Ubuntu
3 and 4 is greyed out.
5) Something else (You can create resize partitions yourself, or choose multiple partitions for Ubuntu.
I just want to make sure what option to choose, I cant afford to lose all my data and windows.
Problem: Showing Kali Linux as current OS and not Windows 8.
Possible reason for showing Kali Linux as current OS:
I have a live CD of Kali Linux and ran it a few times in the past, but according to my knowledge it shouldn't have changed anything.
Maybe the 1st option is still the right one even though the current OS isn't listed right? Or the 3rd option is like a manual setting I guess.
Thanks for the time reading and helping!
how load balancing is initiate in linux kernel
please give me function name which is call step by step to ballance load on multicore processors
thnx in advance
Hello Everyone,
I installed Linux Mint about four days ago, after a few hitches that I was able to figure out on my own, I got everything up and running and am enjoying my experience. There is one problem however, that I haven't been able to fix myself, so now I'm asking for the communities help. Since day 1 I haven't had any sound from Mint. I've tried videos through Firefox, music on Banshee, and system sounds but nothing is working at all. I have spent the better part of the last three days ripping my hair out and jumping from source to source looking for an answer and so far nothing has worked. I have tried a lot of things including forcing ALSA to reload, and even uninstalling and reinstalling ALSA and Pulse all together. Therein lies my next issue, I followed a guide off of the forums to try uninstalling and reinstalling ALSA and Pulse and it seemed all went according to plan, I reveived no errors during the process, but now my little sound icon in the system tray is missing.
Here is the info on my audio device:
Code: Select all
Audio: Card-1: Advanced Micro Devices [AMD] FCH Azalia Controller driver: snd_hda_intel bus-ID: 00:14.2
Card-2: Advanced Micro Devices [AMD/ATI] Device 9840 driver: snd_hda_intel bus-ID: 00:01.1
Sound: Advanced Linux Sound Architecture ver: k3.13.0-37-generic
Any help is greatly appreciated as having no sound, while not vital, is a major inconvenience.
Thank you!
Hello geeks,
I am newbie in Linux and practicing configuring Apache httpd.conf file. I am looking to configure virtualhost but, I can not find directives for virtual hosting. any step by step regarding NameVirtualhost directive would be helpful. I am not sure if I need to install additional modules to get it done.
thanks for your help in advance.
-Hassan