Facing Problem While Solving Josephus Problem In BASH

So I created this big script and want to ask for username and set a variable, however if the username exist in the username variable then continue with script otherwise ask the user to enter his name.

Flow:
-- start script "Enter User Name"
-- ask user to input username
-- if username is blank or different value then put that username in $USERNAME variable
-- then continue with the rest of the script

-- next time this user runs the script it will have his name loaded so he just presses enter to continue with the script.

-- If it is NOT the same user then, new user can erase existing input and enter a new name.

Hope it makes sense...

Thanks in advance for the help.

I have a script which reads a controller ID and continues. I am trying to add some checks for user input "ctrl".

Valid responses would be whole number 1 thur 5. If value is between 1-5 (single numeric value) then continue with the rest of the script. If any other value then Exit script or continue to ask user input until valid.

I tried a couple of while loops do with esac, but can not seem to get a handle

Code:

read -p "Controller ID#: " ctrl

Any help would be greatly appreciated

hello,

i am trying to make a table from some files. i used this to record how much "RD_" field i have in my file. Quote:
grep -o 'RD_' $f|grep -c 'RD_'
forexample i got 5 "RD_" fields now i want to print 5 number of fields from another file starting from 2nd field. i did it mannully like Quote:
awk 'NR==1{print"{"$2","$3","$4","$5","$6","0.0000",""0.0000""}"","}' $file
i want to make it work together and a bit auto matic like PHP Code:
awk 'NR==1{print"{"$2"to "$5"," apend zeros to make it total 7 fields"}"","}' $file 


your coments would be apreciated
thanks alot

Hello, I have an expect script where I ssh to a remote host to determine the network configuration and get from the user the network interface card that should be used. From their response, I determine the subnet mask and save the information to a text file that is later transmitted back to my local host. This is all so that I can set up virtual IP aliasing and verify that the physical IP address of the local and remote host are on the same subnet prior to continuing with the setup. I am running the script on Linux, with expect version 5.45.

The code itelf works just fine, but I'm having some issues with how it displays on the screen. As you'll see below in the example, the default system prompt displays, as does the user input command that I'm sending to the shell from the expect script.

Is there a regular expression or something that I can write to prevent the prompt and command that I'm sending from printing to the screen? I know that it should be suppressed if I have an expect command following the Code:

send -s "\nread n_card?'Enter the network interface card number for this server (i.e. eth0):   '\r

command, but everything I have tried for strings and regular expressions to expect causes the netstat -rn output to not show up all of a sudden. I'm new to expect, so I'm not really sure why this is happening.

I would really appreciate any help/suggestions. Thanks for your time!

Part of the Script Code:
Code:

expect {
   -re $prompt {   ;# Send individual commands and get user input
        set timeout -1
        
        # Get partner hostname and put in vipsetup.txt file
        send -s "hostname > vipsetup.txt\r"  
        expect -re $prompt
        
        # Display the network routing info for the user and prompt for 
        # network interface card number
        send -s "print \"The network routing table for the $ptner server is displayed below:\n\" ; netstat -rn \r"
        
        expect -re "\r(.*):\r"
        send -s "\nread n_card?'Enter the network interface card number for this server (i.e. eth0):   '\r"
        interact "\r" return    ;# Wait for user input from read command
        send -- "\r"
        send -s "echo \$n_card >> vipsetup.txt\r"  
        
        # Obtain subnet mask information for partner based on network 
        # interface card number being used
        send -s "msk=\$(cat /etc/sysconfig/network-scripts/ifcfg-\$n_card | grep NETMASK)\r"
        send -s "msk=\$(echo \${msk#NETMASK=})\r"
        send -s "echo \$msk >> vipsetup.txt\r"
    }
    timeout {
        send_user "Connection to host $hostip timed out."
        exit 6 
    }
    eof {
        send_user "Connection to host $hostip failed."
        exit
    }
}

Script Output:
Code:

The network routing table for the PRIMARY server is displayed below:
 
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
10.105.65.0     0.0.0.0         255.255.255.0   U         0 0          0 eth0
0.0.0.0         10.105.65.1     0.0.0.0         UG        0 0          0 eth0
 [root@remotehost root]$
[root@remotehost root]$ ber for this server (i.e. eth0):   '              < 
Enter the network interface card number for this server (i.e. eth0):   eth0

Hi guys,

i'm beginner with Unix, I tried my best, but I Really don't know how to finish it .

here's my problem : I have to do something like Student system - student's name | subjects | mark |credits.

after starting script it will ask you for Student's name, then which subject, then the mark will appear.

It's a homework, and I have my own idea how to solve it, but cannot finish it, i don't want complete solution, just a help!

Code:

#!/bin/bash
echo "Students name"
echo -n "Enter student's name: "
read name
echo
case $name in
Example1|Math) echo "C" ;;
Example2|Programming) echo "D" ;;
Example3|WWW) echo "A" ;;
Example4|Economie) echo "-" ;;
esac

I don't now how to bring together case with second things which is "enter subject".

I appreciate any help

I am facing problem in enabling the DNS Log making in named.conf file.
My /etc/named.conf file structure is as follows:
-------------------------------------------------------------
//
// named.conf
//
// Provided by Red Hat bind package to configure the ISC BIND named(8) DNS
// server as a caching only nameserver (as a localhost DNS resolver only).
//
// See /usr/share/doc/bind*/sample/ for example named configuration files.
//

options {
listen-on port 53 { 127.0.0.1; 10.40.124.2; };
listen-on-v6 port 53 { ::1; };
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
memstatistics-file "/var/named/data/named_mem_stats.txt";
allow-query { localhost; 10.40.124.2; };
recursion yes;

dnssec-enable yes;
dnssec-validation yes;
dnssec-lookaside auto;

/* Path to ISC DLV key */
bindkeys-file "/etc/named.iscdlv.key";

managed-keys-directory "/var/named/dynamic";
};

logging {
channel default_debug {
file "/var/log/named.run";
severity dynamic;
print-time yes;
};

channel queries_channel {
file "/var/log/queries.log";
severity dynamic;
print-time yes;
print-severity yes;
};
channel security_channel {
file "/var/log/security.log" versions 3 size 5m;
severity debug 3;
print-category yes;
print-severity yes;
print-time yes;
};

channel update_security_channel {
file "/var/log/updates.log" versions 3 size 5m;
severity debug 3;
print-category yes;
print-severity yes;
print-time yes;
};

channel dnssec_channel {
file "/var/log/dnssec.log" versions 3 size 5m;
severity debug 3;
print-category yes;
print-severity yes;
print-time yes;
};

channel xfers_channel {
file "/var/log/zone_transfers.log" versions 3 size 5m;
severity debug 3;
print-category yes;
print-severity yes;
print-time yes;
};

category queries { queries_channel; };
category security { security_channel; };
category update-security { update_security_channel; };
category dnssec { dnssec_channel; };
category xfer-out { xfers_channel; };
};
zone "." IN {
type hint;
file "named.ca";
};

include "/etc/named.rfc1912.zones";
include "/etc/named.root.key";
----------------------------------------------------------------
My DNS Server works fine. Only it cannot make the log.
when I will run this command:
#dig -x 10.40.124.2
the result comes fine but the log is not make in /var/log/queries.log file.
The named is running without chroot enviroment.
Please help me in solving this.

when i am running delay.awk file on AODV.tr and LAR.tr For AODV.tr , it is giving me the o/p value as some delay
but for LAR , its showing me the follwing error

gawk: e2edelay.awk:93: (FILENAME=larscen5.tr FNR=36516130) fatal: division by zero attempted

I was unable to recify the error. could you please help me.
thank you so much

this is the code of awk file which i am using for calculation of delay. kindly help

# http://205.196.121.184/fnufnnc17mwg/...c/e2edelay.awk
# http://mohittahiliani.blogspot.dk/20...s-for-ns2.html
# ===================================================================

# AWK Script for calculating:

# => Average End-to-End Delay.

# ===================================================================



BEGIN {

seqno = -1;

# droppedPackets = 0;

# receivedPackets = 0;

count = 0;

}

{

if($4 == "AGT" && $1 == "s" && seqno < $6) {

seqno = $6;

}
# else if(($4 == "AGT") && ($1 == "r")) {

# receivedPackets++;

# } else if ($1 == "D" && $7 == "tcp" && $8 > 512){

# droppedPackets++;

# }

#end-to-end delay

if($4 == "AGT" && $1 == "s") {

start_time[$6] = $2;

} else if(($7 == "cbr") && ($1 == "r")) {

end_time[$6] = $2;

} else if($1 == "D" && $7 == "cbr") {

end_time[$6] = -1;

}

}


END {

for(i=0; i<=seqno; i++) {

if(end_time[i] > 0) {

delay[i] = end_time[i] - start_time[i];

count++;

}

else

{

delay[i] = -1;

}

}

for(i=0; i<count; i++) {

if(delay[i] > 0) {

n_to_n_delay = n_to_n_delay + delay[i];

}

}

n_to_n_delay = n_to_n_delay/count;



print "\n";

# print "GeneratedPackets = " seqno+1;

# print "ReceivedPackets = " receivedPackets;

# print "Packet Delivery Ratio = " receivedPackets/(seqno+1)*100
#"%";

# print "Total Dropped Packets = " droppedPackets;

print "Average End-to-End Delay = " n_to_n_delay * 1000 " ms";

print "\n";

}

Hello.
How can I write an Script that enter my password for "sudo" command automatically?
for example, I want to run a command that need root permission and when I write it in a bash script, it ask me "sudo" password for user but how can I automate it?
Can it possible for other program like logging via SSH too?

Thank you.

i need to complete this exercise but my code has some issues
HERE is the PRoblem:
Create a script that can accept ANY amount of numbers from the command line. Process the numbers one at a time, where numbers greater than 10 print “large”, numbers less than or equal to 10 print “small”
E.g. process 5 10 15 would print
small
small
large

and here is my code so far
if [ $@ -le "10" ]
then
echo "smaller"
else
echo "bigger"
shift
fi
if [ $@ -le "10" ]
then
echo "smaller"
else
echo "bigger"
shift
fi
if [ $@ -le "10" ]
then
echo "smaller"
else
echo "bigger"
shift
fi
if [ $@ -le "10" ]
then
echo "smaller"
else
echo "bigger"
shift
fi

any help would be greatly appreciated

I am using the following two commands to output CPU and RAM usage on a Linux machine.

Code:

/bin/grep 'cpu ' /proc/stat | awk '{usage=($2+$4)*100/($2+$4+$5)} END {print usage "%"}'

/usr/bin/free | grep Mem | awk '{print $3/$2 * 100.0 "%"}'

My problem is that the output is like this

Quote:
5.33672%
13.9723%
Is there a way to output a single number? For example

Quote:
5
13
Thank you