VAIO SVS1311... SteamOS Install.

Hi guys/gals.

I installed Debian Jessie with LXDE as my default desktop environment, no problems, except I can't play most games. So installed the Meta Package of the Gnome Desktop environment. Everything appeared to be ok, but when I went to reboot, all I get is a black screen.

I went to the Grub and typed in "nomodeset" to get me back to a desktop.
I uninstalled Gnome (not full removal), but still have the same problem.
When I restarted in safety mode, Gnome was still a desktop option that I could load, which I did. I'm confused. Do I need to do a complete removal?

I tried installing the nvidia graphic card driver as per the Debian manual, and that left me with only a root terminal and no GUI.

I've got about 2Gigs of ram and a 2.4 GHz Pentium 3 processor with an ASUS motherboard. (yes, it's a 12 year old computer, but not used for the past few years)

Any help would be great.

Thanks in advance,

Joe

Hi all,

I'm once more trying my hand at Linux, but it's been so long that I've forgotten everything I learned last time and going back in again as a total newbie.

I tried out SteamOS first, but found it much too clunky for my tastes and, despite being based on Debian, seemed to have had a lot of functionality removed and inability to install some packages even after adding in Debian repos to the sources.list, so I ended up switching to vanilla 64-bit Debian 8 using KDE as my desktop. At first things were going good, managed to install the AMD Graphics Drivers and get Steam itself installed, along with downloading/installing a few games.
I then downloaded a game from gog.com but was getting an error message, which on looking it up appeared to be due to my only having 64-bit libraries for my graphics drivers and no 32-bit ones. I did some more Googling, ran some commands and did some apt-get installs (though sadly I can't recall exactly what they were) and eventually, the game launched fine and all appeared well.

The next time I started up my laptop though, Debian just boots straight to a full screen command line, not the desktop GUI that I want, and I have absolutely no idea how to either switch back to the GUI, or make it the default again. I'm not sure if I've somehow removed KDE, the xserver (I think?), somehow disabled one of them or just changed the startup preferences.
I'd really rather not have to reinstall the whole system again, so any suggestions will be very much appreciated!

Hello I'm real new to Linux mint 17 and I was wondering why some games work and some don't. Are they for different operating systems? The games that do work are really good so far. And also what should I do if the operating system hangs up just turn off the computer or is there something else I should do?

i have an hp pavilion dv7 laptop and i installed openmandrivalx 14.1 x64 on it and cannot configure the wireless intel centrino wireless n-2230 adapter. Have downloaded the iwlwifi drivers but cannot install because the system cannot resolve the $MIRRORLIST problem.
This occurs on all mandriva based linux systems i hahe tried mageia with the same result. Mageia cannot even recognise the centrino adapter.
Ubuntu based linux systems install on the fly.
What good is an operating system in the modern era that you cannot connect to the internet seamlessly?

What Is Linux Kernel?

Those who don't know what is the Linux Kernel they should know it because Linux kernel is the essential part of any Linux operating system. It is responsible for resource allocation, low-level hardware interfaces, security, simple communications, basic file system management, and more. Written from scratch by Linus Torvalds (with help from various developers), Linux is a clone of the UNIX operating system. It is geared towards POSIX and Single UNIX Specification compliances.

Latest Stable Linux Kernel Version 3.18.1
It's been a quiet week, and the patch from rc7 is tiny, so 3.18 is out.
I'd love to say that we've figured out the problem that plagues 3.17 for a couple of people, but we haven't. At the same time, there's absolutely no point in having everybody else twiddling their thumbs when a couple of people are actively trying to bisect an older issue, so holding up the release just didn't make sense. Especially since
that would just have then held things up entirely over the holiday break.
So the merge window for 3.19 is open, and DaveJ will hopefully get his bisection done (or at least narrow things down sufficiently that we have that "Ahaa" moment) over the next week. But in solidarity with Dave (and to make my life easier too let's try to avoid introducing any _new_ nasty issues, ok?]

To read all the changes and bugs fixed Download the changelog below -
Changelog

Why to Upgrade to the Latest Linux kernel

Recently in December Linux Kernel version 3.18.1 has been released and announced by Linus Torvalds. If you are using Ubuntu 14.04/14.10 or Linux Mint or any other debian/Ubuntu based then you can update to the latest kernel 3.18.1 to fix bugs, increase performance and security of the system.


Install Linux Kernel 3.18.1

Because it is not available via PPA, the needed deb packages of Kernel 3.18.1 are available via kernel.ubuntu.com. Follow the instructions for your system’s architecture exactly, in order to get a successful installation.

To install or update Latest Stable Kernel 3.18.1 on Ubuntu 15.04 vivid vervet, Ubuntu 14.10 Utopic Unicorn, Ubuntu 14.04 Trusty Tahr (LTS) , Linux Mint 17.1 Rebecca, Linux Mint 17 Qiana, Pinguy OS 14.04, Elementary OS 0.3 Freya, Elementary OS 0.2 Luna, Peppermint Five, Deepin 2014, LXLE 14.04, Linux Lite 2.0, Linux Lite 2.2 and other Ubuntu derivative systems, open a new Terminal window and bash (get it?) in the following commands:


For Linux system 32 bit :

Pass the following commands in the terminal to download the kernel file.

$ wget http://kernel.ubuntu.com/~kernel-ppa...170637_all.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...70637_i386.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...70637_i386.deb

Install Linux Kernel 3.18.1


$ sudo dpkg -i linux-headers-3.18.1*.deb linux-image-3.18.1*.deb

Atfer install complete, update grub and reboot your computer and choose new kernel in grub :

$ sudo update-grub
$ sudo reboot

For Linux system 64 bit :

$ wget http://kernel.ubuntu.com/~kernel-ppa...170637_all.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...0637_amd64.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...0637_amd64.deb

Install Linux Kernel 3.18.1

$ sudo dpkg -i linux-headers-3.18.1*.deb linux-image-3.18.1*.deb

Atfer install complete, update grub and reboot your computer and choose new kernel in grub :

$ sudo update-grub
$ sudo reboot

How To Uninstall Linux Kernel 3.18.1

If you come across any problem after installing/upgrading to linux kernel, can uninstall the newly installed kernel and switch back to old kernel.

$ sudo apt-get remove 'linux-headers-3.18.1*' 'linux-image-3.18.1*'

Hi all! I'm a Linux/Ubuntu noob who has recently bought a brand new HP laptop, nuked the Win 8 OS that it came/w & installed Ubuntu 14.04LTS. After DL/installing apps & setting it up a bit I decided to use gparted & partition my HDD for an additional OS, isolate programs from files, adjust swap, etc. All went well until I was prompted to reboot which I did & now I'm stuck @

" BusyBox v1.21.1 (Ubuntu 1:1.21.0-1ubuntu1) multi-call binary.

usage: chroot NEWROOT [PROG ARGS]

Run PROG with root directory set to NEWROOT "

Which invariably produces: (no matter what command I enter?!?)

" (initramfs) boot from BIOS
/bin/sh: boot: not found "

I'm quite confused @ how to proceed here?

My primary concern is the health of my machine through/after this is worked out.
That said, I'd love to not have to re-install Ubuntu/apps, etc. as I was partitioning the HDD because I had gotten it to a nice back-up place & felt ready to set it up.
Like I said I'm new to Linux/Ubuntu & waayyy behind on my terminal coding, but I could really use some pointers here & I'm not usually hard to teach. lol
Help?! :-[
Thanx!
Embarrassingly yours, WS.

I am a basic computer user as far as operating systems are concerned. I do a little programming here and there but nothing special yet.

I have tried Linux many times, but I'm always left to getting *another* distro, after I fail to properly install Linux. Basically I resort to simple installs and found that Linux Mint and Ubuntu, most of the time work out of the box. However, after an installation, ... here and there I get error messages and sometimes crashes and i understand that my installation is not stable, simply because I did not properly configure some conf file or similar.

Another even more important problem I have is device drivers. Working from the command prompt (console) and the GUI is very confusing to me. I'm not sure if I'm setting something right with one and then unsetting it with the other. So basically I'm here with some noob questions and a couple specific ones.

1. Can someone recommend a good distro to learn to correctly configure drivers with manually. Remember, that I understand that there are distros that work out of the box mostly, but I actually am not worried about complexity as far as someone can guide me through errors. Which will lead to more questions of course.

2. After an installation there are sometimes a dozen errors during bootup, but no stops. Since it all scrolls by fast (most distros), where can I check after bootup what I need to fix?

The Goal is an *error free* stable installation of a linux distro, with enough common sense learned to take it to other distros.

I am having problems with my Sony Vaio windows
it boots up saying (on a black screen, grey text):
==============================================
Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
Status: 0xc0000225
Info: The boot selection failed because a required device is inaccessible.
Enter=Continue ESC=Exit
==========================================
No matter how many times i tried to restart and even tried F10 repeatedly or Alt-F10 I can't get to any other screen other than the above screen.

So I thought ah to hell with windows on this machine. I'll just install a linux distro because it's for my uncle all he really needs is internet and watch youtube videos/movies.

I have successfully burned and installed Fedora before on other machines using LiveCDs when they had CDs.

This time I tried to burn the DVD since it's it doesn't fit on the CD (I got my ISO from http://download.fedoraproject.org/pu...86_64-21-5.iso)
But when i inserted my DVD and restarted the same black screen appears.

So i have been looking for an older version of Fedora that fits on a CD (I am thinking maybe it'll boot from a CD, not sure though) but can't find any.

Any thoughts or solution to my problem?

Thanks in advance.

Hi,
I am very new to linux, and frankly I do not know a whole lot about computers in general, as I'm entirely self taught, and that was all on windows. I really like the idea and concept of linux and ubuntu, and am in the process of learning. I have recently installed Ubuntu 8.04 LTS on an ex Vista computer at work (upon the urging by the boss). I can give more information on the system if needed. However, I think the problem may not be with the system. This is what I got. I installed the o/s and started downloading the updates from the list. As I tried to install Samba and Wine, all of a sudden things started to become complicated. As I'm doing this at work, and everyone is excited to 'play' with this new o/s, someone tried to download limewire as well, when I was away. I didn't see the error messages at that point, but they apparently had some message about java, and tried to shut everything down. Now when I came back, I get this message:

E: dpkg was interrupted you must manually run 'dpkg -- configure - a' to correct.
Problem E: _cache->open()failed

So, not knowing much about linux and even less about using the terminal, I did open the terminal, and typed in: dpkg--configure-a and hit enter. Then it tells me that that command is not found.

I have followed some other posts that deal with this problem, however, all the remedies that worked for them did not work for me. I could use some help, please. My other option is to just reinstall the o/s all over and start new. Thank you.

So I've got 14.04 installed on a new computer I just built. All new hardware, new install, everything new. I had it all up and running for a few days. I got the nvidia drivers installed, installed steam and was even able to play some games. The last time I had it up it loaded fine, I played 'The Talos Principle', then rebooted to go back to windows. Now when I boot into linux it hangs after the login screen. You can look at my post history as I had this issue before. I was able to fix it that time, but I think it was a different cause.

Some things I've tried to date:
The most common suggestion I've found from googling this issue is to restart lightdm. I've done that to no avail.

I've tried simply entering tty from the frozen screen and then coming back out with Ctrl+Alt+F7. No dice there either.

I've also seen that some people needed to reset their graphics drivers when using nvidia. I tried to do that and I don't think it worked. When I try to purge all nvidia packages it always says "0 upgraded, 0 newly installed, 0 to remove and 16 not upgraded".
Results of dpkg:
Code:

$ dpkg -l nvidia*
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait-Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name           Version      Architecture Description
+++-==============-============-============-===================
un  nvidia-common  <none>       <none>       (no description available)
un  nvidia-prime   <none>       <none>       (no description available)

I'm gonna keep googling around in case I find something useful, but I fear I'm treading into water deeper than I know how to swim in and I'm worried that I'll screw something up if I start experimenting. I know just enough about linux to be dangerous. Any advice on what the results of dpkg above mean or suggestions about the problem would be much appreciated.

edit: Forgot to mention that the last time it was working I didn't make any changes to anything. I played a game and rebooted. Suddenly things are broken.