C Compiler Cannot Create Executables

Hi,
After extracting mysql-3.23.40.tar.gz
cd mysql-3.23.40/

Then
mysql-3.23.40]# ./configure --prefix=~/MySQL --with-mysqld-user=generic_user
loading cache ./config.cache
checking host system type... Invalid configuration `x86_64-unknown-linux-gnu': machine `x86_64-unknown' not recognized

checking target system type... Invalid configuration `x86_64-unknown-linux-gnu': machine `x86_64-unknown' not recognized

checking build system type... Invalid configuration `x86_64-unknown-linux-gnu': machine `x86_64-unknown' not recognized

checking for a BSD compatible install... (cached) /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... (cached) yes
checking for working aclocal... found
checking for working autoconf... found
checking for working automake... found
checking for working autoheader... found
checking for working makeinfo... missing
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... (cached) yes
checking for gawk... (cached) gawk
checking for gcc... (cached) gcc
checking whether the C compiler (gcc ) works... yes
checking whether the C compiler (gcc ) is a cross-compiler... no
checking whether we are using GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for c++... (cached) c++
checking whether the C++ compiler (c++ ) works... yes
checking whether the C++ compiler (c++ ) is a cross-compiler... no
checking whether we are using GNU C++... (cached) yes
checking whether c++ accepts -g... (cached) yes
checking how to run the C preprocessor... (cached) gcc -E
checking for ranlib... (cached) ranlib
checking for ld used by GCC... (cached) /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... (cached) yes
checking for BSD-compatible nm... (cached) /usr/bin/nm -B
checking whether ln -s works... (cached) yes
ltconfig: you must specify a host type if you use `--no-verify'
Try `ltconfig --help' for more information.
configu error: libtool configure failed

Help!!!!!!!!

I'm trying to configure (install and run) a program on Red Hat Enterprise Linux WS release 4 (Nahant Update 7). The last section in my failing configure log file is:

checking for X... libraries /usr/X11R6/lib64, headers /usr/X11R6/include
checking whether -R must be followed by a space... neither works
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking X11/Intrinsic.h usability... yes
checking X11/Intrinsic.h presence... yes
checking for X11/Intrinsic.h... yes
checking for X11/Intrinsic.h... (cached) yes
checking Xm/Xm.h usability... yes
checking Xm/Xm.h presence... yes
checking for Xm/Xm.h... yes
checking for Xm/Xm.h... (cached) yes
checking if Xm.h defines XmSCROLL_HOR... yes
checking if GL/GLwDrawA.h can be found... yes
checking if GLw/GLwDrawA.h can be found... no
checking if X11/GLw/GLwDrawA.h can be found... no
checking for main in -lX11... yes
checking for main in -lXt... yes
checking for main in -lXmu... yes
checking for library containing _XmStrings... no
configu error: can't find Xm (motif) library

Any suggestions on how best to proceed would be greatly appreciated. Thanks.

following error shown when i tried the command:
cd ns-allinone-2.27/ &&export CC=gcc41 CXX=g++41 && ./install


============================================================
* Testing for Cygwin environment
============================================================
Cygwin not detected, proceeding with regular install.
============================================================
* Build XGraph-12.1
============================================================
loading cache ./config.cache
checking for a BSD compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... yes
checking for working aclocal... found
checking for working autoconf... found
checking for working automake... found
checking for working autoheader... found
checking for working makeinfo... missing
checking if malloc debugging is wanted... no
checking for gcc... gcc41
checking whether the C compiler (gcc41 ) works... no
configu error: installation or configuration problem: C compiler cannot create executables.
make: *** No targets specified and no makefile found. Stop.
Can not create xgraph; But xgraph is an optional package, continuing...
============================================================
* Build CWeb
============================================================
Making cweb
gcc -g -c -o ctangle.o ctangle.c
ctangle.w:75:12: warning: conflicting types for built-in function ‘strlen’ [enabled by default]
gcc -g -DCWEBINPUTS=\"/usr/local/lib/cweb\" -c common.c
common.w:1409:12: warning: conflicting types for built-in function ‘strlen’ [enabled by default]
common.w: In function ‘fatal’:
common.w:1176:1: warning: format not a string literal and no format arguments [-Wformat-security]
gcc -g -o ctangle ctangle.o common.o
gcc -g -c -o cweave.o cweave.c
cweave.w:79:12: warning: conflicting types for built-in function ‘strlen’ [enabled by default]
cweave.w: In function ‘print_cat’:
cweave.w:1739:1: warning: format not a string literal and no format arguments [-Wformat-security]
gcc -g -o cweave cweave.o common.o
ln: failed to create symbolic link `cweave': File exists
ln: failed to create symbolic link `ctangle': File exists
============================================================
* Build Stanford GraphBase
============================================================
Making sgb
gcc41 -g -I/usr/local/sgb/include -DDATA_DIRECTORY=\"/usr/local/sgb/data/\" -c gb_io.c
make: gcc41: Command not found
make: *** [gb_io.o] Error 127
Unable to create sgb library, but it's optional, so continuing...
============================================================
* Build GT-ITM
============================================================
sgb lib not found. gt-itm & sgb2ns could not be installed. Continuing..
============================================================
* Build zlib
============================================================
Building static library libz.a version 1.1.4 with gcc41.
Checking for unistd.h... No.
Checking for errno.h... No.
Checking for mmap support... No.
gcc41 -O -DNO_ERRNO_H -c -o example.o example.c
make: gcc41: Command not found
make: *** [example.o] Error 127
Zlib make failed, but it's optional Continue ...
============================================================
* Build tcl8.4.5
============================================================
loading cache ./config.cache
checking whether to use symlinks for manpages... no
checking compression for manpages... no
checking for gcc... gcc41
checking whether the C compiler (gcc41 ) works... no
configu error: installation or configuration problem: C compiler cannot create executables.
tcl8.3.2 configuration failed! Exiting ...
Tcl is not part of the ns project. Please see www.Scriptics.com
to see if they have a fix for your platform.



please help

Hello,

i need to install NS2 version 2.26 with RSVP-TE patch to do some MPLS simulations.

I'm trying on fedora 8 and when compiling i am getting this error

* Build ns-2.26
============================================================
loading cache ./config.cache
...
checking for tcl2c++... ../tclcl-1.0b13
checking for X11 header files
checking for X11 library archive
checking for XOpenDisplay in -lX11... (cached) no
can't find X library
Ns configuration failed! Exiting ...
Please check http://www.isi.edu/nsnam/ns/ns-problems.html
for common problems and bug fixes.

All X11 packages are installed (libX11-devel libXext-devel libXau-devel libXmu-devel)

Installed CentOS 3.9 (it seems NS2 2.26 installs well on this distro) but when trying to get packages with yum seems the repo is not working anymore.

If any one could help to solve the problem of installation i would greatly appreciate

Hello every one
please I need your help to fix my problem to install ns2.33allinone on the ubuntu 10.10 in order to run ZRP protocol for security purpose.
before this time I install every thing correctly as follow
The steps I follow to run the ZRP on the Ubuntu 10.10 and Ns2-allinone-2.33
------------------------------------------------------------------
1. first install the Ubuntu 10.10 on VMwear and download the ns2.33 and exract it in the home directory

2.Ubuntu 10.10 - 32´ is old. you have to replace the text in /etc/apt/sources.list , to be able to install packages.
So you write
$ gedit /etc/apt/sources.list
After the file open remove all the text and past the following text instead it.
#
deb http://old-releases.ubuntu.com/ubuntu/ maverick main restricted
deb http://old-releases.ubuntu.com/ubuntu/ maverick multiverse universe
deb http://old-releases.ubuntu.com/ubuntu/ maverick-updates main restricted
deb http://old-releases.ubuntu.com/ubuntu/ maverick-updates multiverse universe
deb http://old-releases.ubuntu.com/ubuntu/ maverick-backports main restricted
deb http://old-releases.ubuntu.com/ubuntu/ maverick-backports multiverse universe
deb http://old-releases.ubuntu.com/ubuntu/ maverick-security main restricted
deb http://old-releases.ubuntu.com/ubuntu/ maverick-security multiverse universe
#

Then save the file and close.

3.Write the following command to update the system
$ sudo apt-get update

4.download the two files from the following link and save it in the home directory

gcc41-compat , `gcc41-compat-4.1.2_i386.deb' :
https://drive.google.com/file/d/0B7S...it?usp=sharing
g++41-compat , `g++41-compat-4.1.2_i386.deb' :
https://drive.google.com/file/d/0B7S...it?usp=sharing

5.write the following command to install
$ sudo dpkg -i g++41-compat-4.1.2_i386.deb gcc41-compat-4.1.2_i386.deb

6.write the following command to update the packages
$sudo apt-get install libx11-dev libxmu-dev libxmu-headers libxt-dev libtool make automake autoconf g++

7. Download the ZRP from the following link and put it in the ns-allinone-2.33 directory
The latest "patch package" is zrp-ns233-patching.tar.gz
https://drive.google.com/file/d/0B7S...it?usp=sharing

8. After that you should follow the next steps
$ cd ns-allinone-2.33/
$ tar xvf zrp-ns233-patching.tar.gz
$ export CC=gcc41 CXX=g++41
$ ./install
$ cd ns-2.33/
$ sudo make install

9. Then you can download the example of the ZRP from the following link and run
ZRP examples : zrp-examples-2012.tar.bz2
https://drive.google.com/file/d/0B7S...it?usp=sharing

but now when i try to install it again i got this error
after i run "./install" command
#
============================================================
* Build tcl8.4.18
============================================================
configu WARNING: unrecognized options: --enable-gcc
checking whether to use symlinks for manpages... no
checking whether to compress the manpages... no
checking whether to add a package name suffix for the manpages... no
checking for gcc... gcc41
checking whether the C compiler works... no
configu error: in `/home/ali/ns-allinone-2.33/tcl8.4.18/unix':
configu error: C compiler cannot create executables
See `config.log' for more details
tcl8.4.18 configuration failed! Exiting ...
Tcl is not part of the ns project. Please see www.Scriptics.com
to see if they have a fix for your platform.
#

so please if any one can help me to fix this problem or give me any advice how to run ZRP protocol and the appropriate environment to run it
thanks in advance for your help

Hello,

I am configuring OCS Server using the following two documentations:

http://wiki.centos.org/HowTos/OCSNG
http://www.howtoforge.com/how-to-ins...-on-centos-5.5

Getting below error during installaton:

""Checking for DBI PERL module...
Found that PERL module DBI is available.
Checking for Apache:BI PERL module...
*** ERROR: PERL module Apache:BI is not installed !
Checking for DBD::mysql PERL module...
Found that PERL module DBD::mysql is available.
Checking for Compress::Zlib PERL module...
Found that PERL module Compress::Zlib is available.
Checking for XML::Simple PERL module...
Found that PERL module XML::Simple is available.
Checking for Net::IP PERL module...
Found that PERL module Net::IP is available.
*** ERROR: There is one or more required PERL modules missing on your computer !
Please, install missing PERL modules first.""

i have googled for the solution unsuccessfully.
please help me in installing the missing perl module.

thanks in advance..

--
Anil Anji

Hi.

Running Suse 10.1 on an x86_64 machine. Trying to install a program and having some difficulty. The program is codeco 3.3. It's a format conversion program used for converting seismic waveforms such that they can be analysed by different analysis packages.

http://www.seismo.ethz.ch/products/s...3/codeco3.html

My debugging skills aren't up to much and I'm hoping someone might be able to help me out with the error. The steps involved in the installation of the package a

1. Download, gunzip and untar.

2. make config
> jp@linux:/usr/local/codeco> make config
(cd src; ./conf.csh)
found system Linux
found compiler

...this is ok, but

3. make
>jp@linux:/usr/local/codeco> make
(cd src; make)
make[1]: Entering directory `/usr/local/codeco/src'
o ../bin/codeco codecomain.f gse_io.f codecoutil.f compdecomp.f sacsub.f sac_io.f mseed_io.f css_io. today.f utmepo.f epoutm.f
make[1]: o: Command not found
make[1]: [codeco] Error 127 (ignored)
make[1]: Leaving directory `/usr/local/codeco/src'

The src code itself is written in fortran and I'm using the Intel fortran compiler version 9.0.031.

I'm at a loss as to the meaning of the above error...my knowledge of linux and software installation still not very good!

Thanks

Trying to install software/drivers for wireless dongle on my Fedora Linux box. I have downloaded and expanded my files into my /home/me/Downloads.

In my example: /home/cjh/Downloads/LinuxDriver4Fedora_v2.5.0.3
This is where the make file is.

I run make and get an error:
"make -C /lib/modules/3.4.2-1.fc16.i686/build SUBDIRS=/home/cjh/Downloads/LinuxDriver4Fedora_v2.5.0.3/os/linux modules
make: *** /lib/modules/3.4.2-1.fc16.i686/build: No such file or directory. Stop.
make: *** [LINUX] Error 2"

The directory "/home/cjh/Downloads/LinuxDriver4Fedora_v2.5.0.3/os/linux" does exist.

What am I missing? I have run it as myself and root and get the same error.

Any assistance greatly appreciated.

TIA,

Skip

hi,

I am newbie in Linux shell scripting.Can anybody help me to check the presence of file identified by variable in Shell scripting?

For example: I am reading the content of a file using while command as below:
"while read -r line
do
code block
done < file_name"

Now in this case every line in file gets stored in the variable 'line' one by one.Problem here is every line in the file is nothing but the file_path of another file say xyz.txt and I am checking presence of this xyz.txt file using below command:
if [-f $line]
as 'line' is the variable which stores file path of xyz.txt but it is not working. It is unable to check the presence of this xyz.txt file as i am addressing it with the variable 'line'.

Please help me.Thanks in advance.

Hello,

I am trying to upgrade CPAN and getting the following errors.
Please suggest how to proceed.


" CPAN.pm: Going to build A/AN/ANDK/CPAN-1.9800.tar.gz

Importing PAUSE public key into your GnuPG keychain... done!
(You may wish to trust it locally with 'gpg --lsign-key 450F89EC')
Checking if your kit is complete...
Looks good
Writing Makefile for CPAN
Could not read '/root/.cpan/build/CPAN-1.9800-qmv5vY/META.yml'. Falling back to other methods to determine prerequisites
Can't exec "make": No such file or directory at /usr/share/perl/5.10/CPAN/Distribution.pm line 2003.
ANDK/CPAN-1.9800.tar.gz
make -- NOT OK
Warning (usually harmless): 'YAML' not installed, will not store persistent state
Running make test
Can't test without successful make
Running make install
Make had returned bad status, install seems impossible
Failed during this command:
ANDK/CPAN-1.9800.tar.gz : make NO "


fyi, I am using Debian Squeeze.


Thanks in advance,

---
Anji