Error IIN PATCHING OLSR (Ns2.35 Ubuntu 12.04)

I am workin on OLSR in ns 2.35 ubuntu 14.10.

I perform all steps and install ns 2.35 and patch um-olsr-ns-2.35_v1.0.patch file after that olsr example run succesfully but problem is every example not run succesfully they showing me fatal error or any line error.

so can u tell me how to solve it

os : ubuntu 14.10 i686.

Hi...

anyone knows to setuo olsr in ns2 but for windows.

I got one but its not work for OLSR.

Hi

It's my first post,please bear with us.I write thesis "The concept of using energy metrics for route selection in OLSR routing protocol". I use the simulator ns2, and UM-OLSR patch. In tlc script I use "Energy model". How and where(in code, or tcl cript) I can change parameter "willingness" during simulation to take into account the level of battery.


pseudocode

if (battery < 1.0) && (battery > 0.8)
{willingnes = WILL_ALWAYS};
else if (battery < 0.8) && (battery > 0.4)
{willingnes = WILL_DEFAULT};
else if (battery < 0.4) && (battery > 0.2)
{willingnes = WILL_LOW};
else if (battery < 0.2)
{willingnes = WILL_NEVER};

Experts,


I need your help to create malicious nodes for OLSR routing protocol. I completly patch OSLR in ns 2.35 in ubuntu 14.10 (32-bit) and its working but when I am try to create any malcious node by defining it "Malicious" or "hacker" it show me an error and not running that .tcl file.

for an example.

$ns_ at 0.0 "[$node_(8) set ragent_] hacker "
$ns_ at 0.0 "[$node_(14) set ragent_] hacker "
$ns_ at 0.0 "[$node_(20) set ragent_] hacker "
$ns_ at 0.0 "[$node_(26) set ragent_] hacker "



Help me to solve this problem.
I searched over internet but couldn't find any solution.

Help me to solve this.

Thank you.

Hi mates,

I am trying to patch ospf in ns-2.34 i have downloaded the patch file from link:

http://sourceforge.net/projects/ospf...s/ospf4ns2.34/

$ cd ns-allinone-2.34/
$ patch -p0 < 20-ospf4ns2.34-examples.patch

Using : $ cd ns-2.34/
# make install

$ cd tcl/ex/ospf/
$ mkdir out_ospf0 out_ospf1 out_ospf2 out_ospf3 out_ospf4 out_ospf5 out_ospf6 out_ospf7 out_ospf8 out_ospf9
$ ns ospf0.tcl

i followed the procedure from below LQ link post no #3

http://www.linuxquestions.org/questi...-a-4175492253/

it is successfully patchinf file but it is showing error when i execute ospf0.tcl file



Quote:
(TCL) Creating simulator & trace files...
(TCL) Setting up nodes and links...
(TCL) Configuring traffic objects...
(TCL) Configuring routing protocol...
invalid command name "Agent/rtProto/OSPF"
while executing
"Agent/rtProto/OSPF set helloInterval 1"
(file "ospf0.tcl" line 132)



pls anyone suggest me ideas to get rid of this err.

Thanks in Advance,

Pon

Hi all,

now i need to know

i) how to add encryption and decryption in any of routing-(DSDV,DSR,AODV,OLSR)?

ii) As of now in routing i am able to see only data flows, but is it possible to send some data(message) from source node and i want to retrieve(read) those messages from receiver nodes?

Since i am beginner, Quote:
i dont know whether my question is right or wrong?
Thanks

Pon

Hey guys
I have been trying to patch GPSR with ns-2.34.The operating system i am using is ubuntu 12.04.
I have made all the necessary changes required in the various files .

I have another version of ns (ns-2.35 ) too but it is in a different directory.
Everytime I run my tcl file an error keeps coming up.
I will be greatful if somebody can help me.This is very very URGENT.


(_o29 cmd line 1)
invoked from within
"_o29 cmd if-queue _o23"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error "error when calling class $cls: $args" $..."
(procedure "_o29" line 2)
(SplitObject unknown line 2)
invoked from within
"$agent if-queue [$self set ifq_(0)] "
(procedure "_o17" line 28)
(Node/MobileNode add-target line 28)
invoked from within
"$self add-target $agent $port"
(procedure "_o17" line 15)
(Node attach line 15)
invoked from within
"$node attach $ragent [Node set rtagent_port_]"
(procedure "create-gpsr-routing-agent" line 29)
invoked from within
"create-gpsr-routing-agent $node $id"
(procedure "gpsr-create-mobile-node" line 41)
invoked from within
"gpsr-create-mobile-node $i"
("for" body line 2)
invoked from within
"for {set i 0} {$i < $opt(nn) } {incr i} {
gpsr-create-mobile-node $i
}"

Hi everyone (i hope this is the right section)

Im trying to install the RT patch preempt_rt 3.18.9 im running Ubuntu 14.04 with kernel v 3.16

i installed the rt patch "patch-3.18.9-rt5.patch" and also a new kernel "3.18.9" i patched the patch file with

patch -p1 < patch-3.18.9.patch

but there is somthing i don't know about linking folders of old kernel and new kernel, i searched about it and found

rm -rf linux && ln -s /usr/src/linux-3.18.9 linux && cd /usr/src/linux

then

make oldconfig

then

make menuconfig

i selected Full preemptive kernel then

make

then this error

cc1: some warnings being treated as errors make[2]: * [kernel/locking/locktorture.o] Error 1 make[1]: * [kernel/locking] Error 2 make: *** [kernel] Error 2


So..... Any help?? can someone walk me through this

or any other real time patch, Thanx.. plzzzzzz

I m learning Tcl and write short code. After running code i got same error repeatedly and not able to find mistake,,,i wrote it as it is from a tutorial. here is the code below

set ns [new Simulator]

set f1 [open out.nam w] #open nam file out.nam
$ns namtrace-all $f1

proc finish{} {
global ns f1
$ns flush-trace
#close $tracefile1
close $f1
exec nam out.nam &
exit 0
}


set n1 [$ns node] # 3 nodes defined
set n2 [$ns node]
set n3 [$ns node]

set duplex-link $n1 $n2 10mb 10ms Droptail
set duplex-link $n2 $n3 10mb 10ms DropTail
set duplex-link $n3 $n1 10mb 10ms DropTail

set udp1 [new Agent/UDP] #UDP agent attached to node n1
$ns attach-agent $n1 $udp1

set cbr1 [new Application/traffic/CBR]
$cbr1 set packetSize_ 500
$cbr1 set interval_ 0.005
$ns attach-agent cbr1 udp1

set null1 [new Aggent/Null]
$ns attach-agent $n2 $null1


$ns connect $udp1 $null1

$ns at 0.5 "$cbr0 start"
$ns at 4.5 "$cbr0 stop"


$ns at 12.0 "finish"

$ns run



ERROR:wrong # args: should be "set varName ?newValue?"
while executing
"set f1 [open out.nam w] #open nam file out.nam"
(file "11.tcl" line 19)

Hi,
I am new in linux. I have following problem while running the codes of TORA in ns-2.35 in ubuntu.Can you please help me?


num_nodes is set 6
INITIALIZE THE LIST xListHead

(_o22 cmd line 1)
invoked from within
"_o22 cmd port-dmux _o37"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error "error when calling class $cls: $args" $..."
(procedure "_o22" line 2)
(SplitObject unknown line 2)
invoked from within
"$agent port-dmux $dmux_"
(procedure "_o19" line 11)
(Node/MobileNode add-target-rtagent line 11)
invoked from within
"$self add-target-rtagent $agent $port"
(procedure "_o19" line 28)
(Node/MobileNode add-target line 28)
invoked from within
"$self add-target $agent $port"
(procedure "_o19" line 15)
(Node attach line 15)
invoked from within
"$node attach $ragent [Node set rtagent_port_]"
(procedure "_o3" line 85)
(Simulator create-wireless-node line 85)
invoked from within
"_o3 create-wireless-node"
("eval" body line 1)
invoked from within
"eval $self create-wireless-node $args"
(procedure "_o3" line 23)
(Simulator node line 23)
invoked from within
"$ns node"
invoked from within
"set n(0) [$ns node]"
(file "tora2.tcl" line 115)