How To Know The Loading Sequence/time Of Modules During Boot?

Hello,
the "lsmod" give the list of the loaded modules/drivers.
How to know when was theier loading time (start/end) ?
Is there any existing log file where that information can be seen ?
For another topic, see http://www.linuxquestions.org/questi...ml#post5362257, I am thinking the unfinished loading of a specific module (ehci-pci or other pci driver) or the loading of a module before another one, could disturb the loading of a module e1000e during a cold boot.
Thanks a lot for any help.

Printing a bootchart? http://www.bootchart.org/images/bootchart.png
Something else?


Similar Content



What Does Kernel Refer To Load Modules At Boot Time/

lsmod is command to list loaded modules and I referred man page of lsmod that shows it refers to /proc/modules file. In terms of my os platform, Ubuntu, almost available modules are in /lib/module directory. I think OS kernel naturally loads modules in there. So, What does kernel refer to load modules at boot time?

Is there any files to be refereed for loading or mechanism can't know easily for end user?

*** ERROR: PERL Module Apache::DBI Is Not Installed !

Hello,

I am configuring OCS Server using the following two documentations:

http://wiki.centos.org/HowTos/OCSNG
http://www.howtoforge.com/how-to-ins...-on-centos-5.5

Getting below error during installaton:

""Checking for DBI PERL module...
Found that PERL module DBI is available.
Checking for Apache:BI PERL module...
*** ERROR: PERL module Apache:BI is not installed !
Checking for DBD::mysql PERL module...
Found that PERL module DBD::mysql is available.
Checking for Compress::Zlib PERL module...
Found that PERL module Compress::Zlib is available.
Checking for XML::Simple PERL module...
Found that PERL module XML::Simple is available.
Checking for Net::IP PERL module...
Found that PERL module Net::IP is available.
*** ERROR: There is one or more required PERL modules missing on your computer !
Please, install missing PERL modules first.""

i have googled for the solution unsuccessfully.
please help me in installing the missing perl module.

thanks in advance..

--
Anil Anji

How To Create A Bootchart In Debian Wheezy Compatible OS?

On my Antix13 (similar Debian Wheezy), I have installed bootchart2 and pybootchartgui.
I have created entries in /boot/grub/menu.lst (see below),
but there are no /var/log/bootchart.tgz as per https://www.debian-administration.or...with_bootchart or http://forums.debian.net/viewtopic.php?f=16&t=38869
What should I do? I made perhaps something wrong.



Code:
timeout 5
color cyan/blue white/blue
foreground ffffff
background 0639a1

gfxmenu /boot/grub/message

title  antiX at sda2, kernel 3.7.10-antix.7-486-smp
root   (hd0,1)
kernel /boot/vmlinuz-3.7.10-antix.7-486-smp root=/dev/sda2 quiet nomodeset radeon.modeset=0
initrd /boot/initrd.img-3.7.10-antix.7-486-smp

# added
title  antiX at sda2, kernel 3.7.10-antix.7-486-smp bootchart
root   (hd0,1)
kernel /boot/vmlinuz-3.7.10-antix.7-486-smp root=/dev/sda2 ro init=/sbin/bootchartd radeon.modeset=0
#

boot
...

Error While Loading Shared Libraries: Libquadmath.so.0

Dear all;
I run an execute file named "A" gets it's input from a text file "B.inp"
but I face this error:
A < B.inp
: error while loading shared libraries: libquadmath.so.0: cannot open shared object file: No such file or directory

I've downloaded libquadmath and when I want to install it ,the other error said I don't have libgc package!!! but I have libgc!! is it because of existing two different repository that it can't share their information?
my operating system is Centos6;
what shall I do?
Thanks for your attention

How To Recover From A Botched Graphics Card Driver Install

OK,

Lastnight I decided to finally attempt to install the dedicated ATI/AMD Catylist drivers. After all I was successfull with the HP drivers, right...

No matter which grub selection I make, getting in is broken, except of course for the Windows XP Pro x64 entry, that works just fine. I'm here with you today, because of the Fedora 21 Live DVD, (slooooww).

Here is the drivers log file:

==========================================================
Supported adapter detected.
Check if system has the tools required for installation.
Uninstalling any previously installed drivers.
Unloading radeon module...
rmmod: ERROR: Module radeon is in use
Unloading drm module...
rmmod: ERROR: Module drm is in use by: ttm drm_kms_helper radeon
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Message] Kernel Module : Found kernel module build environment, generating kernel module now.
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
rm -rf *.c *.h *.o *.ko *.a .??* *.symvers
make -C /lib/modules/3.18.3-201.fc21.x86_64/build SUBDIRS=/usr/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: Entering directory '/usr/src/kernels/3.18.3-201.fc21.x86_64'
CC [M] /usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
/usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:6396:12: warning: ‘KCL_fpu_save_init’ defined but not used [-Wunused-function]
static int KCL_fpu_save_init(struct task_struct *tsk)
^
CC [M] /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o
/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.c: In function ‘KCL_ACPI_Slot_No_Hotplug’:
/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.c:845:21: error: ‘struct acpi_device_flags’ has no member named ‘no_hotplug’
tdev->flags.no_hotplug = true;
^
scripts/Makefile.build:257: recipe for target '/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o' failed
make[2]: *** [/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o] Error 1
Makefile:1385: recipe for target '_module_/usr/lib/modules/fglrx/build_mod/2.6.x' failed
make[1]: *** [_module_/usr/lib/modules/fglrx/build_mod/2.6.x] Error 2
make[1]: Leaving directory '/usr/src/kernels/3.18.3-201.fc21.x86_64'
Makefile:88: recipe for target 'kmod_build' failed
make: *** [kmod_build] Error 2
build failed with return value 2
[Error] Kernel Module : Failed to compile kernel module - please consult readme.
[Reboot] Kernel Module : dracut
==========================================================

I just rebooted without attempting to configure the card, as per the ATI/AMD warning stating that it's important to do so, because my thinking was derailed due to seeing errors, and the install program said I needed to reboot. Afterall, I just couln't believe that with a "Failed to compile kernel module" error, it would actually keep the changes I'd made, that surely Linux had a failsafe in place for such circumstances. In other words, I'm also a newbie, and just don't know how many hoops of fire one has to jump through to be at peace with linux.

Can anyone please help be get back into my install, I've already set up so many things, there's just got to be a way, right?


Thanks in Advance!


JustAnotherHuman

Kernel Compilation Error : In "make Modules_install"

Hello all,
i'm trying to upgrade my 2.4.x to 2.6.x ( on slackware 10.0)
i've experience of compiling 2.4.x to 2.4.x.

so the final steps were..........

make bzImage
make modules
make modules_install ( now here its showing error )

last lines of "make modules"
.........
LD [M] net/sched/sch_prio.ko
CC net/sched/sch_red.mod.o
LD [M] net/sched/sch_red.ko
CC net/sched/sch_sfq.mod.o
LD [M] net/sched/sch_sfq.ko
CC net/sched/sch_tbf.mod.o
LD [M] net/sched/sch_tbf.ko
CC net/sched/sch_teql.mod.o
LD [M] net/sched/sch_teql.ko
CC net/sunrpc/sunrpc.mod.o
LD [M] net/sunrpc/sunrpc.ko
CC sound/soundcore.mod.o
LD [M] sound/soundcore.ko

root@bond:/usr/src/linux# make modules_install
ln: when making multiple links, last argument must be a directory
make: *** [_modinst_] Error 1
...............


i used the "config" from the second cd of slackware 10.0.
inside somewhere in "testing" folder.


A person asked me this

Code:
Did you upgrade your module-init-tools?
It's necessary if you go from 2.4 to 2.6

the version for it is :
Code:
root@bond:/home/bond# depmod -V
module-init-tools 3.0
root@bond:/home/bond#

so i don't think i need to upgrade it.....

now experimently i tried to upgrade witheut loading any "config"
everything worked fine in that case...

so what could be the problem.........any problem with that "config"???

if required......i can post that "config" too.

regards

OS Cannot Be Loaded Without Keyboard Because Of Grub

Hello to everyone!

I was working on a linux server before few weeks. There was a grub/keyboard issue. If no keyboard is attached (ps port) the grub isn't loading the operating system. If the keyboard is attached the grub is loading the operating system by default without any keyboard interaction.

The difference is only that there is a keyboard attached. Thats all.

I was searching on the web and one thing came along: "turn on/off 'stop on errors' feature in your bios.". Maybe its this, but tonight I'm not able to check if its this becuase the server is in a remote location.

However I would like to hear what you think of this problem.

Have a good time!

Module Verification Failed: Signature And/or Required Key Missing - Tainting Kernel

Hello! Who can help me? I remenber this problem have never occured when I was using CentOS 6.4. This time I am using Fedora 19 and problem occured as follow.
[ultrabird@PanFu Downloads]$ ls
dnw-linux-v1.01.tar.gz xdnw-0.5.1.tar.gz
[ultrabird@PanFu Downloads]$ mkdir dnw-linux && tar -zxf dnw-linux-v1.01.tar.gz -C dnw-linux
[ultrabird@PanFu Downloads]$ cd dnw-linux/
[ultrabird@PanFu dnw-linux]$ ls
dnw.rules logo.png Makefile README src
[ultrabird@PanFu dnw-linux]$ cd src/driver/
[ultrabird@PanFu driver]$ ls
Makefile secbulk.c
[ultrabird@PanFu driver]$ make -C /lib/modules/`uname -r`/build M=`pwd` modules
make: Entering directory `/usr/src/kernels/3.10.10-200.fc19.i686'
CC [M] /home/ultrabird/Downloads/dnw-linux/src/driver/secbulk.o
/home/ultrabird/Downloads/dnw-linux/src/driver/secbulk.c: In function ‘secbulk_write’:
/home/ultrabird/Downloads/dnw-linux/src/driver/secbulk.c:60:96: warning: comparison of distinct pointer types lacks a cast [enabled by default]
to_write = min(len, BULKOUT_BUFFER_SIZE);
^
Building modules, stage 2.
MODPOST 1 modules
CC /home/ultrabird/Downloads/dnw-linux/src/driver/secbulk.mod.o
LD [M] /home/ultrabird/Downloads/dnw-linux/src/driver/secbulk.ko
make: Leaving directory `/usr/src/kernels/3.10.10-200.fc19.i686'
[ultrabird@PanFu driver]$ ls
Makefile Module.symvers secbulk.ko secbulk.mod.o
modules.order secbulk.c secbulk.mod.c secbulk.o
[ultrabird@PanFu driver]$ sudo insmod ./secbulk.ko
[sudo] password for ultrabird:
[ultrabird@PanFu driver]$ dmesg | grep secbulk
[ 438.172811] secbulk: module verification failed: signature and/or required key missing - tainting kernel
[ 438.174533] secbulk:secbulk loaded
[ 438.174660] usbco registered new interface driver secbulk
[ultrabird@PanFu driver]$ uname -a
Linux PanFu 3.10.10-200.fc19.i686 #1 SMP Thu Aug 29 19:25:53 UTC 2013 i686 i686 i386 GNU/Linux

dnw is a download tool for ARM. Maybe secbulk is it's driver. I don't know much about it. Any help would be appreciated. Thanks!

Computer Freezes While Loading Rockyou.txt From /usr/share/wordlists

Hi,
Im running a dual boot of kali linux 1.1.0 on a mid 2009 macbook pro.
I first opened terminal, navigated to file using #cd /usr/share/wordlists
Then after finding the file, extracted it using #gzip -d rockyou.txt.gz
Navigated to file in filesystem,Double clicked it and 90% into loading rocky.txt from /usr/share/wordlists, the computer freezes and i can not do anything at all. I do not want to revert to doing a hard shutdown. Although I already have and after going through those steps again I get the same result.

I would 1st like to know if anyone knows why this is happening and what i can do to fix this issue? As well as, what I can do in general if my computer ever freezes up. Thank You.

Segmentation Fault (core Dumped ) Error In Ns2.34

I did some changes in the LAR protocol and suppose the new protocol is named as ABC .
When i am doing make clean and then make.
object file "ABC.o" was successfully created.
Then i tried to run tcl file , nothing has been written in the trace file and it gave me the following error

21052015$ ns234 new.tcl scen1 setting other default settings...
removing unecessary packet headers...
num_nodes is set 100
INITIALIZE THE LIST xListHead
loading mobility file
loading traffic file
Starting Simulation...
Segmentation fault (core dumped)

I tried a lot but unable to find out where is the error. I am unable to find out the point of error . Is it in .cc file or in .tcl file.
Could someone please help me.
My work is stucked and i searched a lot but didn't get anything.

please please .............. help me