No Data Sent In Pegasis.out (NS2)

Hi all,

I was wondering did anyone try running PEGASIS simulation on NS-2.34? I am using Ubuntu 10.04 and I tried running it with the LEACH+PEGASIS patch from exidus, but the pegasis output does not seem right, although the leach output seems fine.
As seen there is not data sent and the nodes alive stays 10 (used only 10 nodes) with energy still intact. Any input/thoughts are appreciated, thanks!

Code:

Creating sensor nodes... - uAMPS.tcl
0 1 2 3 4 5 6 7 8 9 (10 == BS) - uAMPS.tcl
*** NOTE: no connection pattern specified. - wireless.tcl
Loading scenario file... - wireless.tcl
Node 0: (3.6149593552644173,36.078549379519444)
Node 1: (58.871299055810688,72.899243455798938)
Node 2: (66.192033079542227,78.762060347368035)
Node 3: (26.408279047537725,13.096542662520214)
Node 4: (69.871280002347788,8.1301262174407611)
Node 5: (59.175824494648644,20.065448163107714)
Node 6: (23.120326699279399,59.510628627385309)
Node 7: (35.061642916436142,75.71922716485301)
Node 8: (10.49768087011654,98.860375722339555)
Node 9: (28.928238399759049,88.984149177085683)
Max Distance for this Simulation is 113.0
Load complete... - wireless.tcl
Starting Simulation... - wireless.tcl
BS received info: (3.6149593552644173 36.078549379519444 2) from Node 0  a nodik je 10 - mit/uAMPS/ns-bsapp.tcl
BS received: 1 - mit/uAMPS/ns-bsapp.tcl
BS received info: (58.871299055810688 72.899243455798938 2) from Node 1  a nodik je 10 - mit/uAMPS/ns-bsapp.tcl
BS received: 2 - mit/uAMPS/ns-bsapp.tcl
BS received info: (66.192033079542227 78.762060347368035 2) from Node 2  a nodik je 10 - mit/uAMPS/ns-bsapp.tcl
BS received: 3 - mit/uAMPS/ns-bsapp.tcl
BS received info: (26.408279047537725 13.096542662520214 2) from Node 3  a nodik je 10 - mit/uAMPS/ns-bsapp.tcl
BS received: 4 - mit/uAMPS/ns-bsapp.tcl
BS received info: (69.871280002347788 8.1301262174407611 2) from Node 4  a nodik je 10 - mit/uAMPS/ns-bsapp.tcl
BS received: 5 - mit/uAMPS/ns-bsapp.tcl
BS received info: (59.175824494648644 20.065448163107714 2) from Node 5  a nodik je 10 - mit/uAMPS/ns-bsapp.tcl
BS received: 6 - mit/uAMPS/ns-bsapp.tcl
BS received info: (23.120326699279399 59.510628627385309 2) from Node 6  a nodik je 10 - mit/uAMPS/ns-bsapp.tcl
BS received: 7 - mit/uAMPS/ns-bsapp.tcl
BS received info: (35.061642916436142 75.71922716485301 2) from Node 7  a nodik je 10 - mit/uAMPS/ns-bsapp.tcl
BS received: 8 - mit/uAMPS/ns-bsapp.tcl
BS received info: (10.49768087011654 98.860375722339555 2) from Node 8  a nodik je 10 - mit/uAMPS/ns-bsapp.tcl
BS received: 9 - mit/uAMPS/ns-bsapp.tcl
BS received info: (28.928238399759049 88.984149177085683 2) from Node 9  a nodik je 10 - mit/uAMPS/ns-bsapp.tcl
BS received: 10 - mit/uAMPS/ns-bsapp.tcl

At 10: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 20: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 30: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 40: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 50: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 60: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 70: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 80: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 90: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 100: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 110: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 120: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 130: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 140: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 150: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 160: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 170: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 180: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 190: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 200: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 210: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 220: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 230: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 240: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 250: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 260: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 270: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 280: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 290: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 300: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 310: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 320: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 330: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 340: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 350: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 360: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 370: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 380: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 390: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 400: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 410: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 420: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 430: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 440: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 450: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 460: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 470: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 480: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 490: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 500: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 510: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 520: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 530: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 540: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 550: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 560: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 570: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 580: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 590: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


At 600: - mit/uAMPS/stats.tcl
		Total Energy = 0.00020132494141871592
		Total Data = 0
		Total Alive = 10


Simulation complete. - mit/uAMPS/stats.tcl

num_nodes is set 11
mac/channel.cc: sendUp - Calc highestAntennaZ_ and distCST_
mac/channel.cc: highestAntennaZ_ = 1.5,  distCST_ = 160.8

Help In Leach

Hello

Now i try with leach+pegasis-ns234-files-2.tar.gz

but the same problem

in leach.err

mac/chanel.cc: INITIALIZE THE LIST xListHead
SORTING LISTS ...DONE!

but leach.out

Total Energy = 1.8677000593689714
Total Data = 0
Total Alive = 4

How To Solve This Logical Error Of LEACH?

Hello,
I have installed LEACH in NS-2.34 (ubunto-14.04)

I could run it successfully..

But it always stopped in a few seconds without sending data

i.e. Total Data=0

And it consumed a large energy!!!!

It didn't show any error in leach.error

Is it a logical error or others?

thanks

Locked Ramdisk

hi folks , total linux noob here hopefully somebody can help me with a problem
i wanted to try out linux mint on my apple imac and i seem to have ended up with this ramdisk or memdisk which is some sort of security version of linux

this damn thing has total root access and has setup all sorts of remote server connections and wont let me do a bloody thing , even format a usb stick

its corrupted my apple install and base efi and just got me on total lockdown

anybody know how to get rid of this ? please

Error In Running Leach_test In NS-2.34

Hi all,

I am trying to simulate leach on NS2 but I've had problems with running the leach_test. I've followed all steps from installing NS2 up to installing the LEACH patch (used the latest one from exidus). Here's the error message in the leach.err I found.

Code:

couldn't read file "/mit/uAMPS/uamps.tcl": no such file or directory
    while executing
"source.orig /mit/uAMPS/uamps.tcl"
    ("uplevel" body line 1)
    invoked from within
"uplevel source.orig[list $fileName]"
    invoked from within
"if [$instance_ is_http_url $fileName] {
set buffer [$instance_ read_url $fileName]
uplevel eval $buffer
} else {
uplevel source.orig[list $fileName]
..."
    (procedure "source" line 8)
    invoked from within
"source /mit/uAMPS/uamps.tcl"
    (file "tcl/mobility/leach.tcl" line 18)
    invoked from within
"source.orig tcl/mobility/leach.tcl"
    ("uplevel" body line 1)
    invoked from within
"uplevel source.orig[list $fileName]"
    invoked from within
"if [$instance_ is_http_url $fileName] {
set buffer [$instance_ read_url $fileName]
uplevel eval $buffer
} else {
uplevel source.orig[list $fileName]
..."
    (procedure "source" line 8)
    invoked from within
"source tcl/mobility/$opt(rp).tcl"
    (file "tcl/ex/wireless.tcl" line 187)

Your help are very much appreciated, thanks!

File Manager Folder Properties

In Windows, when a folder is right clicked, I can see the number of files and folders in that folder and the detailed size of the total of files and folders down to the byte. In Linux Mint when I do the same thing in the default file manager, it gives me a total nunber of "Items" and a size rounded to xx.x GB. Is there a file manager that will give me the same information as Windows does, or another way to get that information?

Sed Use To Rename Files Under Multiple Directory

Hi all,

I am trying to use sed to rename multiple files under multiple directory.

so lets say for exmaple:
Under /root I have 2 directory as follows:

# ll {test1,test2}
test1:
total 0
-rw-r--r--. 1 root root 0 Apr 10 19:16 authkey.apollo

test2:
total 0
-rw-r--r--. 1 root root 0 Apr 10 19:16 authkeys.apollo

if I want to change apollo to jupiter then used this:
for i in `ls {test1,test2} | grep -i 'apollo'`; do echo $i; sed -i 's/apollo/jupiter/g'; done

but it seems like it got missed on the file path in sed. is there any other easier way or better approach to make this work?

Thanks in advance.

Sed: Transforming 'ls-laR' Output Into A List With Absolute Paths

Hello, this is my first post
First i would like to thank you all for answering other people questions because I've been able to learn from the forum a lot.

I need your help with something.
I have standard output from 'ls -laR /etc' command which looks like this:
Code:

/etc/X11/xorg.conf.d:
total 4
drwxr-xr-x. 2 root root  29 Apr  1 00:46 .
drwxr-xr-x. 5 root root  54 Apr  1 00:43 ..
-rw-r--r--. 1 root root 232 Apr  1 00:46 00-keyboard.conf

/etc/xdg:
total 12
drwxr-xr-x.  4 root root   36 Apr  1 00:43 .
drwxr-xr-x. 87 root root 8192 Apr 12 13:53 ..
drwxr-xr-x.  2 root root    6 Jun 10  2014 autostart
drwxr-xr-x.  2 root root   17 Apr  7 01:25 systemd

by using sed command:
Code:

sed -e '/./!d' -e '/^total/d' -e '/\.$/d' -e 's/:$/\//' list.txt

I have transformed it to the following form:

Code:

/etc/X11/xorg.conf.d/
-rw-r--r--. 1 root root 232 Apr  1 00:46 00-keyboard.conf
/etc/xdg/
drwxr-xr-x.  2 root root    6 Jun 10  2014 autostart
drwxr-xr-x.  2 root root   17 Apr  7 01:25 systemd

and now I would like to achieve absolute paths at the end of each row

Code:

-rw-r--r--.  1 root root  232 Apr  1 00:46 /etc/X11/xorg.conf.d/00-keyboard.conf
drwxr-xr-x.  2 root root    6 Jun 10  2014 /etc/xdg/autostart
drwxr-xr-x.  2 root root   17 Apr  7 01:25 /etc/xdg/systemd

How do I join(merge) filenames with corresponding absolute path to their parent directory?

I know how to extract filenames using awk and get this:
Code:

00-keyboard.conf

autostart
systemd

but I don't know what to do next. Should I use some hitech sed option or go for loop or try with arrays? Help. Heeeelp

SFTP Configuration For Single Directory Per User

Dear Members,

I am trying to configure sftp on my Server (Redhat). But I am facing following issue.

Link used: https://www.linode.com/docs/tools-re...ian-and-ubuntu

These are the parameters added to /etc/ssh/sshd_config file :

Quote:
Match group filetransfer
ChrootDirectory %h
X11Forwarding no
AllowTcpForwarding no
ForceCommand internal-sftp
Permission home Directories are as follows :

Quote:
ls -ld /home/test1/
drwxr-xr-x 7 root root 4096 May 14 09:49 /home/test1/

ls -l /home/test1/
total 12
drwxr-xr-x 2 root root 4096 May 14 09:49 docs
drwxr-xr-x 2 root root 4096 May 13 11:43 nitish
drwxr-xr-x 2 root root 4096 May 14 09:49 public_html

Debug Command : sftp -vvv test1@Ipaddress

Code:

debug1: Next authentication method: password
test1@IP-address's password:
debug3: packet_send2: adding 64 (len 53 padlen 11 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug3: Wrote 144 bytes for a total of 1421
debug1: Authentication succeeded (password).
debug2: fd 4 setting O_NONBLOCK
debug3: fd 5 is O_NONBLOCK
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Requesting no-more-sessions@openssh.com
debug1: Entering interactive session.
debug3: Wrote 128 bytes for a total of 1549
debug3: Wrote -1 bytes for a total of 1549
Write failed: Broken pipe
Couldn't read packet: Connection reset by peer

I need the user can't access/see the other directories other than it's own directory

Waiting for your response.

Thank you

Redhat-Keeda

New Fedora 21 Userid Cannot Start LibreOffice 4.3

I created a new user on my Fedora 21 system so I could demo Fedora and apps to coworkers without leaving my personal account exposed. After logging into the account I launched Firefox and verified connectivity without any problems. Then I launched Libre office and got the following nastygram
Code:

 The application cannot be started. 
LibreOffice user installation could not be processed due to missing access rights. Please make sure that you have sufficient access rights for the following location and restart LibreOffice:

/home/fedorademo/.config/libreoffice/4

This looks like a variation of the folders being owned by root but that isn't the case with this account as everything is owned by the new account.
Code:

 [fedorademo@tesseract ~]$ pwd
/home/fedorademo
[fedorademo@tesseract ~]$ cd .config
[fedorademo@tesseract .config]$ ll
total 80
<snip>
drwxrwxr-x. 3 fedorademo fedorademo 4096 Feb  9 20:12 libreoffice
<snip>
[fedorademo@tesseract .config]$ cd libreoffice
[fedorademo@tesseract libreoffice]$ ll
total 4
drwx------. 3 fedorademo fedorademo 4096 Feb  9 20:12 4
[fedorademo@tesseract libreoffice]$ cd 4
[fedorademo@tesseract 4]$ ll
total 4
drwxrwxr-x. 9 fedorademo fedorademo 4096 Feb  9 20:42 user
[fedorademo@tesseract 4]$ cd user
[fedorademo@tesseract user]$ ll
total 32
drwxrwxr-x. 2 fedorademo fedorademo 4096 Feb  9 20:42 autotext
drwxrwxr-x. 3 fedorademo fedorademo 4096 Feb  9 20:42 basic
drwxrwxr-x. 2 fedorademo fedorademo 4096 Feb  9 20:42 config
drwxrwxr-x. 3 fedorademo fedorademo 4096 Feb  9 20:42 database
drwxrwxr-x. 2 fedorademo fedorademo 4096 Feb  9 20:12 extensions
drwxrwxr-x. 2 fedorademo fedorademo 4096 Feb  9 20:42 gallery
-rw-------. 1 fedorademo fedorademo  329 Feb  9 20:42 registrymodifications.xcu
drwxrwxr-x. 2 fedorademo fedorademo 4096 Feb  9 20:12 uno_packages
[fedorademo@tesseract user]$ cd  config
[fedorademo@tesseract config]$ ll
total 404
-rw-r--r--. 1 fedorademo fedorademo   4308 Jan 16 18:28 arrowhd.soe
-rw-r--r--. 1 fedorademo fedorademo  48408 Jan 16 18:27 autotbl.fmt
-rw-r--r--. 1 fedorademo fedorademo  30852 Jan 16 18:28 classic.sog
-rw-r--r--. 1 fedorademo fedorademo  13132 Jan 16 18:28 cmyk.soc
-rw-r--r--. 1 fedorademo fedorademo   4408 Jan 16 18:28 gallery.soc
-rw-r--r--. 1 fedorademo fedorademo   5238 Jan 16 18:28 hatching.soh
-rw-r--r--. 1 fedorademo fedorademo  10766 Jan 16 18:28 html.soc
-rw-rw-r--. 1 fedorademo fedorademo   2329 Feb  9 20:12 javasettings_Linux_X86_64.xml
-rw-r--r--. 1 fedorademo fedorademo   2334 Jan 16 18:28 libreoffice.soc
-rw-r--r--. 1 fedorademo fedorademo   6840 Jan 16 18:28 modern.sog
-rw-r--r--. 1 fedorademo fedorademo   5271 Jan 16 18:28 palette.soc
-rw-r--r--. 1 fedorademo fedorademo  31320 Jan 16 18:28 scribus.soc
-rw-r--r--. 1 fedorademo fedorademo 155895 Jan 16 18:28 standard.sob
-rw-r--r--. 1 fedorademo fedorademo  11461 Jan 16 18:28 standard.soc
-rw-r--r--. 1 fedorademo fedorademo   2426 Jan 16 18:28 standard.sod
-rw-r--r--. 1 fedorademo fedorademo   4984 Jan 16 18:28 standard.soe
-rw-r--r--. 1 fedorademo fedorademo   5080 Jan 16 18:28 standard.sog
-rw-r--r--. 1 fedorademo fedorademo   2171 Jan 16 18:28 standard.soh
-rw-r--r--. 1 fedorademo fedorademo   1708 Jan 16 18:28 styles.sod
-rw-r--r--. 1 fedorademo fedorademo   2331 Jan 16 18:28 tango.soc
-rw-r--r--. 1 fedorademo fedorademo  14420 Jan 16 18:28 web.soc
[fedorademo@tesseract config]$

And so on
I've tried it with an admin account and a standard account in Fedora 21 and both fail.
I tried it with a standard account in Fedora 20 and it worked.
Fedora 20 is running a slightly older version of Libreoffice 4.2.8.2-2.fc20
Fedora 21 is running 4.3.5.2-11.fc21. Any thoughts on how to troubleshoot this would be appreciated. Right now I can't tell if it is a LibreOffice problem or a Fedora problem. Thanks for reading

I Get An Error While Executing Leach.tcl

couldn't read file "mit/uAMPS/ns-leach.tcl": no such file or directory
while executing
"source.orig mit/uAMPS/ns-leach.tcl"
("uplevel" body line 1)
invoked from within
"uplevel source.orig[list $fileName]"
invoked from within
"if [$instance_ is_http_url $fileName] {
set buffer [$instance_ read_url $fileName]
uplevel eval $buffer
} else {
uplevel source.orig[list $fileName]
..."
(procedure "source" line 8)
invoked from within
"source mit/uAMPS/ns-leach.tcl"
(file "leach.tcl" line 7)

No Data Sent In Pegasis.out (NS2)

Similar Content