How To Run Shell Script In Any Folder Except The Folder Which Contains The Shell Script

I have a shell script to find folders which are 25 days older and delete it, and put the deleted folder details into log file like this

Code:

 find /ahome/xxx/$FOLDER -type d -mtime +25  -exec ls -ld {} \;  -exec rm -rf {} \;  >> mylogfile.log

after running this command it deletes the folder and logs the folder deleted. But also print error msg
Code:

find: /ahome/prksh/dir/test: No such file or directory

How to suppress the error msg

I have a shell script that currently changes the mac address of eth0 repeatedly. However, it does not change the public IP address, confirmed by wget -qO- ipinfo.io/ip .

PERIOD=10

while [ 1 ]
do
echo "Changing mac address..."
let lastup=`date +%s`
macchanger -A eth0
let diff=`date +%s`-$lastup
if [ "$diff" -lt "$PERIOD" ]
then
sleep $(($PERIOD-$diff))
echo "Changed mac address successfully."
echo
elif [ "$diff" -gt "$PERIOD" ]
then
echo "Command took longer than iteration period of $PERIOD seconds!"
fi
done

The script needs to change the IP Address statically.

Also, ultimately, what I am trying to accomplish, for security reasons, is to frequently and automatically change a computer's public IP address and mac address. This way, my office's computers, when using the Internet, has an additional form of protection.

I am trying to write a simple test script that executes a single rsync call. Once I get the syntax right, the script will be expanded to incorporate several rsync instructions to save me time.

I'm using a Cygwin Terminal on Windows 7 to run Rsync.

The script is called "backup" and I call it from the cygwin terminal using "./backup". Have used chmod to make it executable.

When I execute the rsync instruction as a standalone instruction at terminal prompt, the file copies to the target folder perfectly.

However, when I try and drop the same instruction into a script, it copies the file over from it's original file name "mvi_1840.mov" to a file with the name "." -- literally a single period. I can rename the file to a .mov file and it works fine but naturally, I don't want to have to do this.

The one other thing I will mention is that the file is located in the /home/"username" directory in cygwin vs /bin. But I would not think that this would make a difference.

I have pasted the contents of the script file below:
Code:

#!/bin/bash
    rsync.exe -rltDvP --exclude "System Volume Information" --exclude
 "RECYCLER" --exclude=\$RECYCLE.BIN --delete "/cygdrive/c/users/<USERNAME>
/desktop/mvi_1840.mov" "/cygdrive/c/users/<USERNAME>/desktop/test/"

Any help would be greatly appreciated!

Thanks

How can I get shell to read special characters as strings? Such as $ or !

Code:

$ ./test.sh "!hooray!"
bash: !hooray!: event not found
$ ./test.sh !hooray!
bash: !hooray!: event not found

If I escape it, the \ prints in the output:
Code:

$ ./test.sh "\!hooray\!"
\!hooray\!

The code of test.sh is as follows:
Code:

$ cat test.sh 
#!/bin/bash
str="$1"
echo "$str"

TIA

Hi All,

I have perl script which I am trying to run on 1st Monday via cron job.
So I scheduled it as follows:

0 0 1-7 * * root ["$(date '+%a')" = "Mon"] && /usr/bin/perl script.pl

But then it didn't run so checked cron log and it seemed like its missing the command. so added a \ in front of %a and then it picked up the whole command as per cron log.

But still it didnt ran the script. I then change the script to just && echo "test">/tmp/test

Still nothing. if I run it as /usr/bin/perl script.pl it runs though

Thanks in advance.

Hi,
I am looking for a simple shell script that allows for sftp to be run from the server to another server (Windows). I would like the script to be passed parameters suchas destination server, Id, password, Directory structure/folder name, file name etc...
Need some help to know how to start with and it would be great if someone help me with any sample sftp shell script

This is my script and the syntax to run this script is give ip and next will be the file or script you want to perform on remote server



#!/bin/bash

# The private key used to identify this machine
IDENTITY_KEY=/home/adnew.pem

syntax()
{
echo "Syntax: Ec2.sh server_ip scriptFile]"
echo "For example: ./Ec2.sh server_ip scriptFile"
exit 1
}

if [ $# -ne 2 ]
then
echo not enough arguments
syntax
fi


echo "Running script $2 on $1"
ssh -ttq -i $IDENTITY_KEY ec2-user@$1 sudo -i 'bash -s' < $2
exit
exit
echo "Done"



on script file i have give for testing

touch /root/test
ls /root/test
exit
exit

it makes the file but do not show the ls output by giving error


tcgetattr: Inappropriate ioctl for device

exit


what I have to do ??

Hy All,

I have two nodes running RHEL 6.4 which are in cluster. I have clustered httpd service. Now I have certain application suppose X which reside in SAN partition. Now my job is to only automate this script to run by analyzing httpd status. I have successfully created the script apptrigger.sh whose content is given below,

-bash-4.1$ cat apptrigger.sh
a=0
b=0
c=0
d=0
a="service httpd status"
b=`eval $a`
##### CHECKING WHETHER HTTPD SERVICE IS RUNNING OR NOT #####
if [ "$b" != "httpd is stopped" ]; then
c="bash /switchapp/switch/ezlinkenterprise/bin/ezlink-cluster.sh status"
d=`eval $c`
##### CHECKING WHETHER EZ IS RUNNING OR NOT #####
if [ "$d" != "EzTaskMgr is Running" ]; then
ezstart
fi
fi

I have created this script in say test user. Now when I put this script to automate or run every minute through test user and defined its value in crontab -e of test user whose content is as shown below
$crontab -l
* * * * * /bin/bash /home/test/apptrigger.sh

but this script is running as root user so I cannot get the o/p
I think some environment variable need to be set. Anyone can guide me with this step? Thanks for your views and suggestion.

Hello,

I am setting up a linux server for gaming and I am using a script to update the files automatically and create a folder with a certain name.

Code:

# !/bin/bash

# A convenience function, to save us some work
update_server() {
	# Read the app id and the directory into a variable

	APP_ID=$1
	DIR=$2

	# Create the directory ( if it does not exist already )
	if [ ! -d "$HOME/$DIR" ]; then
		mkdir -p "$HOME/$DIR"
	fi

	# Uh-oh, it looks like we still have no directory. Report an error.
	if [ ! -d "$HOME/$DIR" ]; then
		# Describe what went wrong
		echo "ERROR! Cannot create directory $HOME/$DIR!"

		# Exit with status code 1 ( which indicates an error )
		exit 1
	fi

	# Call SteamCMD with the app ID we provided and tell it to install
	./bin/steamcmd.sh +login anonymous +force_install_dir "$HOME/$DIR" +app_update $APP_ID validate +quit
}

# Now the script actually runs update_server ( which we just declared above ) with the id of the application ( 4020 is Garry's Mod ) and the name of the directory we want the server to be hosted from:

update_server 4020 "gmodserver"

exit 0

When I run this script, it creates 2 folders on my server : gmodserver and gmodserver? There is no files downloaded in gmodserver. All the files are downloaded in gmodserver?

I looked for a few hours on how to solve this problem but I have no idea what the added ? might be so I am lost as to what to look for. Could you help me on figuring this out?

Thank you.

edit : I am using ubuntu 15.04 x64 if it makes a difference.

I want to get the time when program starts and finishes. But it always show the same time. Here is my shell script. But it always show that `START TIME` is same as `END TIME`.
Code:

host_list=("c15-0330-01.ad.mtu.edu" "c15-0330-02.ad.mtu.edu" "c15-0330-03.ad.mtu.edu" "c15-0330-04.ad.mtu.edu")
program=("L_1" "L_4" "L_3" "L_4")
subject="The job is finished"
START=$(date +"r")
address="/home/campus27/zwang10/Desktop/AWRR/program/power/vmodel_1/nprot/K_10"
ssh -f "${host_list[0]}" "cd '$address' && nohup Rscript '${program[0]}.R' > '${program[0]}_sh.txt';echo 'The job\n $address\n${program[0]} is finished\nSTART TIME = $START\n' END TIME =`date +"%r"` | mutt zwang10@mtu.edu -s '${host_list[0]} - Job ${program[0]}.R finished' -a '$address/${program[0]}_sh.txt';"