Run Multiple Windows Same Time

hi does anybody know how to have multiple windows open at the same, so i can switch between them on mint xfce 17 64bit.
what i'm talking about is 4 windows open at the same time but i wan't to snap them together or use some piece of software instead
thanks


Similar Content



Converting Multiple Gedit Files To Windows Versions

i have a few score of files (>50) in fasta format. these work fine in linux os
but i have to send these to a collegue who uses windows. and these files don't open properly in notepad or wordpad. executing save as to windows format does the trick

but i don't want to manually convert all of them

is ther a way i can accomplish conversion of multiple files and saving them in a format of my choosing using say terminal

Opening Terminals In X-windows And More

When I bring up Linux Ubuntu I would like to get a login prompt and choose as whom to log in. Then I would like to say startX or something like that and to get into X-windows. As I am in X-windows I would like to, do a right mouse click or something and chose “open a new terminal” or something. I used to do that all back over decade ago. Then I haven’t used Linux for over a decade. Now I got a box with Ubuntu, but …

When I bring it up I automatically get logged in as “Owner” and I get into interface that limits what I can do. Specfically, I don’t see how to become a different user, how to get into command line mode, how to run X-windows and open multiple terminal windows. And I would like to decide myself when to invoke some fancy GUI interface, instead of being forced into it..

I found one way to do some of what I want: ctl-alt-functionkey. But when I log in and do startX from there the right mouse click does not give me “open new terminal” option.

Could somebody help me out? Thank you very much in advance.

Roman

Clone A Bootable CF Card With Multiple Partitions And Copy To Bigger Drive

Hi, all, I am new to the forum and quite new to Linux, I am running Mint and Kali from a USB drive, all is going well with with the software and I am starting to find my way around it.

So, now to my question, I have 15 machines which all run from a CF card and the card has multiple partitions and is a Windows Embedded XP, not that the operating system makes any difference, I need to upgrade all the CF cards from 2gb to 4gb, so unfortunately Windows isn't an option to use to copy the drives as it doesn't recognise multiple partitions on a removable drive, so I cant just remove the drive, clone it and fit the new one.

What I need is a method of cloning the drive completely with both partitions, I have read about dd but cant seem to see anything about doing this with multiple partitions, as Linux sees it as two drives when I plug it in, how can I use dd or anything else to clone the drive which is bootable and has two partitions?

At some point I would like to automate the process as I could have many of these machines/drives to upgrade, is there a way to write a program that will automatically back up the drives from a USB drive and then reinstall it, I have seen this done before but I am not sure if this method did the whole drive, just the main drive or all partitions?

Switch Back From Mint To Windows?

i recently installed mint 17.1, i dislike it as i was a windows user :/ could someone help me get back to windows please. i did not dual boot, ive tried deleteing partitions but failed. pure newbie here no experience with linux. im not really stupid though, but if someone could do a step by step instruction it would help massively. THANK YOU !!!

How To Open Linux File/software In Windows 8?

Hi,

Could anyone please explain as understandable as possible how could I on my Windows 8 open either single file or install (and use) entire software which is supposted to work on Linux and/or Ubuntu? I have absolutelly NO experience with Linux and have never used it. Honestly, I don't know if there is any difference between Linux and Ubuntu. I want to be inside my Windows 8 while using Linux files/sofware. The only solution I could think of are actually two but neither of them is useful for me:

1. Vmware (i don't know how to use it)
2. Rent remote computer (vps/rdp) with linux OS installed (this would let me be in Windows 8 while being able to use Linux file/software [on remote computer] but sooner or later I would want to have Windows installed there too)

Tried program Linux Reader but didn't work on my Windows 8. Although I would need solution for installation/usage of software (that can be used only on linux/ubuntu), regardless of details***, the current problem is basically related to single files only: I have two files, both in IMG extension. Don't know how to open them because Deamon Tools doesn't handle IMG. The problem is that filesystem in one of them is "Linux" and filesystem in another is "142". The error I am getting when I try to open them is:

"File with harddrive/disc snapshot is corrupted."

But this is most likely because they are supposted to be used in linux environment, hence such question.

*** when i said "details" I was referring to basically anything: type of software, size, purpose, whether or not it needs network connection, whether or not it contains logging in (username password, etc) requirement, etc.

The following solution for current situation (quoted error above) works only partially:

http://www.sysprobs.com/simple-tip-h...thout-software

I am able to open/run/mount IMG if I do what is described on this link (im basically opening iso in this case - see the website) but when opening the virtual drive, the following error message proves that the file can be used in linux/ubuntu only:

"Windows cannot access that drive. Drive could be corrupted. Make sure the drive is in condition that can be recognized by Windows. If drive isn't formatted then format it before usage."

Would need detailed instructions, for total beginner, who has never used linux/ubuntu, what to do in such case: how to use in win8 files/software that are supposted to be used in linux/ubuntu. Also answer on how to open IMG would be highly appreciated.

Kindest regards and thank you a million in advance.

Cannot Boot Linux USB Or CD In Windows 8.1

I just got a new laptop with Windows 8.1 and I cannot figure out how to install Linux Mint by booting from a CD or USB drive. Previously, I had installed Linux Mint on my old desktop and netbook computers that were running Windows XP. I had no trouble booting from a CD. Now that the process has been complicated in Windows 8.1 I don't know what to do. Any help would be greatly appreciated, I would really like to get rid of Windows 8.1 ASAP. Thanks!

Can't Open Pavucontrol In Xfce - Sound Not Configured

I am trying to open pavucontrol in debian with the xfce desktop.
The error message is:

Code:
Connection to Pulseaudio failed. Automatic retry in 5s
In this case this is likely because PULSE_SERVER in the Environment/X11 Root Windows Properties or default-server in client.conf is misconfigured.

I am having trouble getting sound and configuring the settings.
There is no sound setting in the Settings Manager of xfce.
Also, every time I change alsamixer to my hdmi sound card it keeps going back to the default analog sound card when I exit the program.

How can I access the system settings on the desktop or do I need to change a file setting from the terminal?

Image A Bootable CF Card With Multiple Partitions

Hi all,

As you can probably tell I am new to Linux and new to the forum, I am using Kali and Mint both as live Linux environments on USB drives, all is good and I am finding my way around, the reason for the post is that I need to copy 15 CF cards that have multiple partitions, Windows isn't really an option as it can only see one partition on a removable drive, so here goes with Linux.

The CF cards contain Windows Embedded XP in one partition and a separate partition for user data which isn't protected, not that the contents matter, only the fact that it is bootable with multiple partitions, the object is to upgrade the old 2gb cards to 4gb cards to add an additional program on the embedded drive, but they are both full.

as long as I can copy both partitions over the partition size doesn't matter as I can resize that if necessary, but I need both partitions to copy over to the new drive.

I have read that dd command is the way to go but cant find much on multiple partitions which display in Linux as two drives, so how do I go about this, any pointers

Ideally I would like to automate the process as this is something that we could end up doing on a regular basis, I have seen a USB drive that was plugged into a PC and through a basic GUI allowed you to copy a HDD but I don't know If that would do both partitions, something for the future?

How To Synchronize Time Between Windows And Linux

In my machine I have dual operating systems (windows7 and sabayon). After installing the linux I found the time was not correct. I had to change the time zone to get it right.

Then when I got back to windows surprisingly I found that the time in windows have also changed. I changed the time in windows and then when I got back to linux the time has changed.

I just don't understand how to get of the problem. Is there really any way out there to sync the time in both the operating systems.

Good Command Prompt Linux For Beginners, But Power Users?

Hi, please excuse any misunderstanding about the title.

I'm an experienced computer user, but not with Linux. As a matter of fact, even with Windows, I only do so much at the command prompt.

I am looking for a very fast (boot and etc.) Linux system, that has nothing more than a command prompt. No X-Windows. However, I would like to configure X-Windows immediately after an installation.

I noticed the LFS project. Very cool, but way too complex for me. It is exactly what I'm looking for, except, I would like the basic system to already be proven, maybe even with security updates.

The biggest most important thing is (ONLY WHAT I WANT). I don't want dozens of browsers, a hundred text editors, or any other cool or stupid open source or commercial software. I simply am looking for what Dos 6.22 was in Linux.

There are many distros. Can you guys help me pick one out that is light, secure and ready to be configured to run X windows or X-Free or Xorg, I'm not sure what the best is right now.

PS: I'm a linux noob, but I have had several decent installations of Ubuntu, and some experience with the command line, including compiling software, but still a beginner.