Executing Command From File (with Tail) Probably Misquotes?

The installation of the latest stable on my Lenovo G505s went just fine in UEFI mode but when the installation finished I never reach grub during the bootup process. I put Refind media onto a usb stick and boot into my computer using it after that I tried to follow this guide https://wiki.debian.org/GrubEFIReinstall but I'm having some trouble.

When I start the computer with the "Refind media" it gives me 3 options where the first is

"Boot EFI\debian\grubx64.efi from 510 Mib Fat Volume" If I choose this option it takes me to grub via eufi(?) and then I can get into my computer as usual.

How can I make my computer understand that it should recognize and boot from EFI\debian\grubx64.efi, 510 Mib Fat Volume?

I found https://wiki.debian.org/EFIStub and since my
/boot/efi/EFI/debian looks like; grubx64.efi initrd.img-3.16.0-4-amd64 vmlinuz-3.16.0-4-amd64
I tried the following
Code:

# efibootmgr -c -g -L "Debian (EFI stub)" -l '\EFI\debian\grubx64.efi' -u 'root=UUID=$UUID ro quiet rootfstype=ext4 add_efi_memmap initrd=\\EFI\\debian\\initrd.img-3.16.0-4-amd-64'
efibootmgr: Could not set variable Boot0005: No such file or directory
efibootmgr: Could not prepare boot variable: No such file or directory

Code:

    [ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD"
    EFI boot on HDD


     apt-get install --reinstall grub-efi

went just fine and I have /dev/sda1 mounted on /boot/efi
but when I try grub-install I get

Code:

grub-install /dev/sda
Installing for x86_64-efi platform.
efibootmgr: Could not set variable Boot0005: No such file or directory
efibootmgr: Could not prepare boot variable: No such file or directory
Installation finished. No error reported.

What is going wrong here?

Code:

    update-grub
    Generating grub configuration file ...
    Found background image: .background_cache.png
    Found linux image: /boot/vmlinuz-3.16.0-4-amd64
    Found initrd image: /boot/initrd.img-3.16.0-4-amd64
    Adding boot menu entry for EFI firmware configuration
    done

Code:

file /boot/efi/EFI/debian/grubx64.efi
/boot/efi/EFI/debian/grubx64.efi: PE32+ executable (EFI application) x86-64 (stripped to external PDB), for MS Windows

but efibootmgr --verbose | grep debian gives me nothing. If I run efibootmgr without grep I get:

Code:

    efibootmgr --verbose
    BootCurrent: 0002
    Timeout: 0 seconds
    BootOrder: 2001,0003,0004,0001,0000,2002,2003
    Boot0000* USB HDD     : SanDisk U3 Cruzer Micro    BIOS(2,500,00)..................3.......1...5........................................
    Boot0001* USB ODD     : SanDisk U3 Cruzer Micro    BIOS(3,500,00)..................;.......9...=........................................
    Boot0002* EFI USB Device   ACPI(a0341d0,0)PCI(10,0)USB(2,0)0311050000HD(1,800,2d5f,55fc859c-5227-4cd5-bd64-a4fd678ba8b6)RC
    Boot0003* SATA HDD    : ST1000LM014-1EJ164                         BIOS(2,0,00).......................................................................
    Boot0004* SATA ODD    : MATSHITADVD-RAM UJ8C2                      BIOS(3,0,00).......................................................................
    Boot2001* EFI USB Device   RC
    Boot2002* EFI DVD/CDROM   RC
    Boot2003* EFI Network   RC

Here is some additonial information which might be relevant.

Code:

    # df -h
    Filesystem                 Size  Used Avail Use% Mounted on
    /dev/dm-1                  9.1G  2.5G  6.2G  29% /
    udev                        10M     0   10M   0% /dev
    tmpfs                      1.4G  9.1M  1.4G   1% /run
    tmpfs                      3.5G   68K  3.5G   1% /dev/shm
    tmpfs                      5.0M  4.0K  5.0M   1% /run/lock
    tmpfs                      3.5G     0  3.5G   0% /sys/fs/cgroup
    /dev/sda2                  237M   35M  190M  16% /boot
    /dev/sda1                  511M  132K  511M   1% /boot/efi
    /dev/mapper/ludo--vg-home  893G  103M  848G   1% /home
    tmpfs                      713M  4.0K  713M   1% /run/user/117
    tmpfs                      713M  8.0K  713M   1% /run/user/1000

Code:

fdisk -l

Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 0080BBEA-1B46-4EAE-9471-CC523BFCAD44

Device       Start        End    Sectors   Size Type
/dev/sda1     2048    1050623    1048576   512M EFI System
/dev/sda2  1050624    1550335     499712   244M Linux filesystem
/dev/sda3  1550336 1953523711 1951973376 930.8G Linux filesystem

GPT PMBR size mismatch (13695 != 2009726) will be corrected by w(rite).

Disk /dev/sdb: 981.3 MiB, 1028980224 bytes, 2009727 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: E4A93BB9-2F9C-4487-B090-91B620879E4C

Device     Start   End Sectors  Size Type
/dev/sdb1   2048 13662   11615  5.7M EFI System

Disk /dev/mapper/sda3_crypt: 930.8 GiB, 999408271360 bytes, 1951969280 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mapper/ludo--vg-root: 9.3 GiB, 9999220736 bytes, 19529728 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mapper/ludo--vg-swap_1: 14.4 GiB, 15439233024 bytes, 30154752 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mapper/ludo--vg-home: 907.1 GiB, 973967720448 bytes, 1902280704 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes

On my Antix13 (similar Debian Wheezy), I have installed bootchart2 and pybootchartgui.
I have created entries in /boot/grub/menu.lst (see below),
but there are no /var/log/bootchart.tgz as per https://www.debian-administration.or...with_bootchart or http://forums.debian.net/viewtopic.php?f=16&t=38869
What should I do? I made perhaps something wrong.



Code:

timeout 5
color cyan/blue white/blue
foreground ffffff
background 0639a1

gfxmenu /boot/grub/message

title  antiX at sda2, kernel 3.7.10-antix.7-486-smp
root   (hd0,1)
kernel /boot/vmlinuz-3.7.10-antix.7-486-smp root=/dev/sda2 quiet nomodeset radeon.modeset=0
initrd /boot/initrd.img-3.7.10-antix.7-486-smp

# added
title  antiX at sda2, kernel 3.7.10-antix.7-486-smp bootchart
root   (hd0,1)
kernel /boot/vmlinuz-3.7.10-antix.7-486-smp root=/dev/sda2 ro init=/sbin/bootchartd radeon.modeset=0
#

boot
...

hiiii all

I had installed Windows 7 on /dev/sda1 and /dev/sda2 and then I installed Centos 7.
Since then I cant find Windows entry in the Grub.
And i had tried to use all kind of solution found on the net I still cant see any entry.
I had edited 40_custom script adding:

cat <<EOF
menuentry "windows 7" {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
search --no-floppy --fs-uuid --set=root FCDAE998DAE95006
chainloader +1
}
EOF

then this command grub2-mkconfig -o /boot/grub2/grub2.cfg

[root@localhost]# grub2-mkconfig -o /boot/grub2/grub2.cfg
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.10.0-123.el7.x86_64
Found initrd image: /boot/initramfs-3.10.0-123.el7.x86_64.img
Found linux image: /boot/vmlinuz-0-rescue-93890f189dec4b309c004fdce969ca5a
Found initrd image: /boot/initramfs-0-rescue-93890f189dec4b309c004fdce969ca5a.img

then this
[root@localhost]# tail -10 /boot/grub2/grub.cfg
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
[root@localhost]#


Still cant find windows in grub
please help me with this guys
thanks

Ubuntu 12.04

I installed updates, which included a new kernel. I went to remove one of the older kernels and got:

Code:

jnojr@DEV:~$ sudo apt-get purge linux-image-3.13.0-46-generic
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages were automatically installed and are no longer required:
  linux-headers-3.13.0-46-generic gir1.2-ubuntuoneui-3.0 wireless-regdb iw
  linux-headers-3.13.0-46 crda linux-headers-3.5.0-23-generic lesstif2
  linux-headers-3.5.0-23 libubuntuoneui-3.0-1 thunderbird-globalmenu
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
  linux-image-3.13.0-46-generic*
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
After this operation, 197 MB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 340656 files and directories currently installed.)
Removing linux-image-3.13.0-46-generic ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-46-generic /boot/vmlinuz-3.13.0-46-generic
update-initramfs: Deleting /boot/initrd.img-3.13.0-46-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-46-generic /boot/vmlinuz-3.13.0-46-generic
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-3.13.0-51-generic
Found initrd image: /boot/initrd.img-3.13.0-51-generic
Found linux image: /boot/vmlinuz-3.13.0-49-generic
Found initrd image: /boot/initrd.img-3.13.0-49-generic
Found linux image: /boot/vmlinuz-3.13.0-48-generic
Found initrd image: /boot/initrd.img-3.13.0-48-generic
Found Windows Vista (loader) on /dev/sda1
Found CentOS release 6.6 (Final) on /dev/sdb1
Found linux image: /boot/vmlinuz-3.13.0-51-generic
Found initrd image: /boot/initrd.img-3.13.0-51-generic
Found linux image: /boot/vmlinuz-3.13.0-49-generic
Found initrd image: /boot/initrd.img-3.13.0-49-generic
Found linux image: /boot/vmlinuz-3.13.0-48-generic
Found initrd image: /boot/initrd.img-3.13.0-48-generic
Found Windows Vista (loader) on /dev/sda1
Found CentOS release 6.6 (Final) on /dev/sdb1
Found memtest86+ image: /boot/memtest86+.bin
error: syntax error.
error: Incorrect command.
error: syntax error.
error: Incorrect command.
error: syntax error.
error: line no: 146
Syntax errors are detected in generated GRUB config file.
Ensure that there are no errors in /etc/default/grub
and /etc/grub.d/* files or please file a bug report with
/boot/grub/grub.cfg.new file attached.
done
Purging configuration files for linux-image-3.13.0-46-generic ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-46-generic /boot/vmlinuz-3.13.0-46-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-46-generic /boot/vmlinuz-3.13.0-46-generic

I have no idea how I'd "ensure there are no errors" in the /etc/grub related files... I have no idea what's supposed to be there. Looking at the line it's complaining about in /boot/grub/grub.cfg.new doesn't tell me anything. How do i find out what it's unhappy about?

I can't seem to mount a CD-R or DVD-R, doesn't matter if it is blank or not.
However, when I use a program such as Brasero, I am able to write to them. I cannot use dd to write to them.

This is the output of trying to mount/unmount.
Code:

root@delarocha-> mount /dev/sr0 /media/cd
mount: /dev/sr0 is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/sr0,
       missing codepage or helper program, or other error
       In some cases useful info is found in syslog - try
       dmesg | tail or so.

root@delarocha-> umount /dev/sr0
umount: /dev/sr0: not mounted
root@delarocha-> umount /media/cd
umount: /media/cd: not mounted
root@delarocha-> umount /media/cdrom
umount: /media/cdrom: not mounted

dmesg | tail
Code:

root@delarocha-> dmesg | tail
[ 1536.299777] sr 1:0:0:0: [sr0]  
[ 1536.299804] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1536.299809] sr 1:0:0:0: [sr0]  
[ 1536.299814] Sense Key : Illegal Request [current] 
[ 1536.299820] sr 1:0:0:0: [sr0]  
[ 1536.299824] Add. Sense: Logical block address out of range
[ 1536.299829] sr 1:0:0:0: [sr0] CDB: 
[ 1536.299832] Read(10): 28 00 00 00 00 00 00 00 01 00
[ 1536.299846] end_request: I/O error, dev sr0, sector 0
[ 1536.299915] EXT4-fs (sr0): unable to read superblock

I don't think it can be anything wrong with the disk, since it is a untouched disk.
Note: The results of everything(apart from dmesg I would assume), are the same for a CD-R and DVD-R

This is what I get while trying to dd a .iso and .mp4, respectively.

Code:

web@delarocha-> dd if=/dev/sr0 of=~/Downloads/xubuntu-14.04.1-desktop-amd64.iso
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.000377316 s, 0.0 kB/s

Code:

web@delarocha-> dd if=/dev/sr0 of=~/Videos/The\ Hobbit/The\ Hobbit\ The\ Desolation\ of\ Smaug.mp4
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.000377179 s, 0.0 kB/s

uname -a
Code:

Linux delarocha 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08) x86_64 GNU/Linux

When I used lsblk when I close the disk tray, it shows it mounted.
Code:

sr0                     11:0    1     2K  0 rom

But after I use the dd command to write the .iso, it disappears.

Here is my /etc/fstab
Code:

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
/dev/mapper/delarocha-root /               ext4    errors=remount-ro 0       1
# /boot was on /dev/sda1 during installation
UUID=5bbedec0-6e3d-4185-91e0-292a72585908 /boot           ext2    defaults        0       2
/dev/mapper/delarocha-swap_1 none            swap    sw              0       0
/dev/sr0        /media/cdrom0   udf,iso9660 user,noauto     0       0
/dev/sdb1       /media/usb0     auto    rw,user,noauto  0       0

I have also tried replacing /dev/sr0 in the above commands with /media/cdrom0.

Hi,

I have problems mounting my second drive at boot automatically.
(sorry i am a noob)

When i use the mount command, it works fine.
Code:

mount -t ext3 /dev/sdb2 /mnt/HD/HD_b2

But when i try to add one if the following lines to /etc/fstab
It will not mount the drive at boot or with Code:

mount -a

, also fstab is empty afer reboot (normal??)

Code:

/dev/sdb2 /mnt/HD/HD_b2 ext3 defaults,errors=remount-ro 0 1

Code:

UUID=553afede-fa45-4cdc-9972-c0a9aa899509 /mnt/HD/HD_b2 ext3 errors=remount-ro 0 1

Code:

/dev/sdb2 /mnt/HD/HD_b2 ext3 rw 0 0

Code:

/dev/sdb2 /mnt/HD/HD_b2 ext3 defaults 0 1

output blkid:

Code:

/dev/sda1: UUID="e67e5c15-7b8b-9389-c311-e5d4c61326f9" TYPE="linux_raid_member"
/dev/sda2: UUID="09e0e365-0aa6-4214-b571-2bc6b027fd9f" TYPE="ext3"
/dev/sda4: UUID="64038414-136c-4939-bd14-9871a20290bd" TYPE="ext3"
/dev/sdb1: UUID="e67e5c15-7b8b-9389-c311-e5d4c61326f9" TYPE="linux_raid_member"
/dev/sdb2: UUID="553afede-fa45-4cdc-9972-c0a9aa899509" TYPE="ext3"
/dev/sdb4: UUID="bf594be6-ffb6-469d-a3a8-246be66a4d90" TYPE="ext2"

/etc/mtab:

Code:

rootfs / rootfs rw 0 0
/dev/root / ext2 rw,relatime,errors=continue 0 0
sysfs /sys sysfs rw,relatime 0 0
proc /proc proc rw,relatime 0 0
squash /usr/local/tmp ramfs rw,relatime,size=38m 0 0
/dev/loop0 /usr/local/modules squashfs ro,relatime 0 0
/dev/mtdblock5 /usr/local/config jffs2 rw,relatime 0 0
/dev/sda4 /mnt/HD_a4 ext3 rw,relatime,errors=continue,data=writeback 0 0
/dev/sdb4 /mnt/HD_b4 ext2 rw,relatime,errors=continue 0 0
none /proc/bus/usb usbfs rw,relatime 0 0
/dev/sda2 /mnt/HD/HD_a2 ext3 rw,relatime,errors=continue,user_xattr,data=writeb$
/dev/sdb2 /mnt/HD/HD_b2 ext3 rw,relatime,errors=continue,user_xattr,data=writeb$
/dev/sda2 /mnt/HD/HD_a2/squeeze/mnt/HD/HD_a2 ext3 rw,relatime,errors=continue,u$
/dev/root /mnt/HD/HD_a2/squeeze/mnt/root ext2 rw,relatime,errors=continue 0 0
/dev/root /mnt/HD/HD_a2/squeeze/dev ext2 rw,relatime,errors=continue 0 0
sysfs /mnt/HD/HD_a2/squeeze/sys sysfs rw,relatime 0 0
proc /mnt/HD/HD_a2/squeeze/proc proc rw,relatime 0 0

When mount command is used Code:

mount -t ext3 /dev/sdb2 /mnt/HD/HD_b2

The following line is added to mstab -->
Code:

/dev/sdb2 /mnt/HD/HD_b2 ext3 rw 0 0

I diont know what i am doing wrong, mount for HD_a2 works fine (other disk, worked at default), i hav e NAS DNS-325 where i installed Debian on. I used this tutorial to install debian.

The strange thing is, i had to reinstall my NAS, and befor it worked fine after i had installed debian 2 years ago, i just dont remeber how i fixed this.

Hello

I have installed a CentOS 6.4 on VmWare.

Now, after several days of using it, it suddenly does not boots. There is a problem with its initialization, here is the error:

Kernel Panic : Unalble to init. Try passing init= option to the kernel.
Pid 1 : Swapper not tainted.

I have used CentOS.iso to rescue it, but it still does not solve it.

My grub.conf contains:

PHP Code:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE:  You have a /boot partition.  This means that
#          all kernel and initrd paths are relative to /boot/, eg.
#          root (hd0,0)
#          kernel /vmlinuz-version ro root=/dev/sda2
#          initrd /initrd-[generic-]version.img
#boot=/dev/sda
default=0
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title CentOS (2.6.32-358.el6.x86_64)
    root (hd0,0)
    kernel /vmlinuz-2.6.32-358.el6.x86_64 ro root=UUID=6082bcf5-00ba-4bf8-86ea-9821d774cb6f rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
 initrd /initramfs-2.6.32-358.el6.x86_64.img 



How should I solve it then? Thanks in advance

I have made a change to GRUB2 bootloader in etc/default/grub.
Now I need to run 'update grub' for the change to take effect.
However, the 'update grub' command on the terminal is giving this error message:
Code:

root@debian:/# update grub
bash: update: command not found

Can someone please explain why this command is no longer working?

I've had to make a change to grub because I tried to install a new distro which meant I had to alter grub.
The install wasn't successful so I deleted the grub file and then re-installed it.
The re-installed grub needs a change so I can get sound on my pc.
However, I can't add these changes because the 'update grub' command doesn't work.

I've checked the grub file with another debian distro and they are both the same.
So now I don't know if I need to check if a different grub file is the problem or anything else.
Can someone help?

Hi,
Recently, I decided to change my partition scheme for my home server. I had a RAID0 that previously spanned three disks and now I only want it to span two. Getting rid of the old one was easy. But getting the new one to work has been a real pain.

It's running Debian Jessie.

For starters, here's my /etc/mdadm/mdadm.conf:
Code:

root@maples-server:~# cat /etc/mdadm/mdadm.conf 
# mdadm.conf
#
# Please refer to mdadm.conf(5) for information about this file.
#

# by default (built-in), scan all partitions (/proc/partitions) and all
# containers for MD superblocks. alternatively, specify devices to scan, using
# wildcards if desired.
#DEVICE partitions containers
DEVICE /dev/sdb1 /dev/sdc1

# auto-create devices with Debian standard permissions
CREATE owner=root group=disk mode=0660 auto=yes

# automatically tag new arrays as belonging to the local system
HOMEHOST <system>

# instruct the monitoring daemon where to send mail alerts
MAILADDR root

# definitions of existing MD arrays

ARRAY /dev/md0 metadata=1.2 UUID=032e4ab2:53ac5db8:98806abd:420716a5 devices=/dev/sdb1,/dev/sdc1

As you can see, I have it specified to setup the RAID as /dev/md0. But every time I reboot, my /proc/mdstat shows:
Code:

root@maples-server:~# cat /proc/mdstat 
Personalities : [raid0] 
md127 : active raid0 sdc1[1] sdb1[0]
      488016896 blocks super 1.2 512k chunks
      
unused devices: <none>

I can confirm that it's actually md127 by looking at /dev:
Code:

root@maples-server:~# ls -l /dev/md*
brw-rw---- 1 root disk 9, 127 May  2 20:17 /dev/md127

/dev/md:
total 0
lrwxrwxrwx 1 root root 8 May  2 20:17 maples-server:0 -> ../md127

And here's a bit more info:
Code:

root@maples-server:~# mdadm --detail --scan
ARRAY /dev/md/maples-server:0 metadata=1.2 name=maples-server:0 UUID=032e4ab2:53ac5db8:98806abd:420716a5

I've tried adding all sorts of options to /etc/mdadm/mdadm.conf, ranging from just the output of the above command (only changing "/dev/md/maples-server:0" to "/dev/md0") to what you see at the top. Nothing seems to be making a difference.

Does anyone have any ideas?

Hello,

for the reason my PC hangs a long time at the boot line
initrd /boot/initrd.img-3.7.10-antix.7-486-smp
I decided to uopdate it with
update-initramfs -u
but the error
"cryptsetup: WARNING: failed to detect canonical device of /dev/sda2" appear.

I have few questions now:
- how to create a quick initrd
- how to avoid that error?

Your help will be much appreciated.