.tar.gz 111GB Extracting Fails

Hi guys

We are trying to move Oracle applications database tier archive, that is 111GB (over Linux) to a USB external drive using cp. Though the file successfully gets transferred to the external drive, trying to extract the file from a 2nd machine always fails, saying the archive is corrupt.
We have checked the integrity of the archive using 7-zip, reporting no errors. However totally frustrated as our last few attempts were totally futile.

The interesting part is, if we do scp to transfer the file to 2nd machine, extraction doesn't fail.

Please let us know, how we can successfully move this archive to the 2nd machine which is at a remote location and no possibilities of setting up a FTP for such a huge size file.

Both the source and destination Linux distros are RHEL 5 Enterprise, 64Bit, ext3 file systems.


regards,


Similar Content



EXT4 File System @ Server Side & Ext3 External Storage

Hi guys

We are urgently moving Oracle application to a backup server for some patching etc. The backup server is installed with Oracle 6.6 64Bit linux with default partitions. We found that the system has ext4 file system, while our external storage through HBA interface/IBM is formatted with ext3 file system.
Hence, please let us know what kind of performances issues we may come across, or the same could be ignored?

regards

Incorrect Disk Space Of External Disk

I have an external disk connected to a raspberry pi to act as a nas, which I am accessing from a linux mint desktop machine.
The nas disk is 30GB, but according to my desktop machine, which connects through the file browser via samba, only around 318MB are reported as available.
If I try to copy a 400MB file it tells me there is insufficient space.
The disk is currently empty, so all 30GB should be available.

On the nas box, cfdisk seems to report the disk size and the partition size correctly:
Code:
                          cfdisk (util-linux 2.20.1)

                              Disk Drive: /dev/sda
                        Size: 30016659456 bytes, 30.0 GB
              Heads: 64   Sectors per Track: 32   Cylinders: 28626

    Name        Flags      Part Type  FS Type          [Label]        Size (MB)
 ------------------------------------------------------------------------------
    sda1        Boot        Primary   ext4                             30016.66*

I'm not sure where to look next.

Gzip -r -c Directory > Archive.gz

SUSE 11. I have issued the command "gzip -r -c directory > archive.gz" over a complete directory tree. I've got no errors or warnings. I can decompress the gz file also without errors, but what I get is a single file which is the concat of all of the original files, including binaries, without posibility of splitting them into the original ones.

I suppose I've lost my files, no?.

Secondary question: why does gzip let me issue that destructive command?

I'm Having Trouble Adding Ppa's

I'm running kali linux. I'm having troubles installing pretty much anything, because when I add any ppa using the add-apt-repository command, I get an error message. I'll use simple screen recorder as an example

add-apt-repository ppa:maarten-baert/simplescreenrecorder

maarten-baert/simplescreenrecorder
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /tmp/tmp.EQM7zzCyye --trustdb-name /etc/apt//trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyring /etc/apt/trusted.gpg.d//debian-archive-jessie-automatic.gpg --keyring /etc/apt/trusted.gpg.d//debian-archive-jessie-security-automatic.gpg --keyring /etc/apt/trusted.gpg.d//debian-archive-jessie-stable.gpg --keyring /etc/apt/trusted.gpg.d//debian-archive-squeeze-automatic.gpg --keyring /etc/apt/trusted.gpg.d//debian-archive-squeeze-stable.gpg --keyring /etc/apt/trusted.gpg.d//debian-archive-wheezy-automatic.gpg --keyring /etc/apt/trusted.gpg.d//debian-archive-wheezy-stable.gpg --keyring /etc/apt/trusted.gpg.d//kali-archive-keyring.gpg --keyserver keyserver.ubuntu.com

Can someone please tell me what is going on? I have never been able to add a ppa before using kali linux.

Installing A New Distro On An Old Desktop PC

I have a computer that I made myself a few years ago. The internal DVD drive does not work anymore. What are my options to install a linux distro on it. I am not able to boot from an external USB DVD drive that I have, on this machine. My understanding is that you need a CD to install Plop to inorder for it to work so that I can boot from an external USB stick?

What are my options without having to buy another DVD drive? I know I can install my .iso file to a USB stick using Unetbootin, but than what? How do I get it to boot on this machine?

Thanks!!!

Trying To Use The Dd Command

Hi i am trying to use the dd command to create an iso of my Ubuntu machine but am having some problems with the syntax trying to do it using an external hard drive as the file location.

can anyone help me out?

How To Remount Root Partition On System Booted From External Usb Drive

Hello,
I have a setup with arch linux installed on external ssd as normal (non-live) installation.
I had to do that after my main laptop was broken. I don't want to put my drive into the new hardware, so I run it as external one for until the main will be repaired.

It boots as usual, everything is working fine until the usb drive reconnects for some reason (may be the physical connection problem). It probably mounts itself as read-only, the system freaks out and dies slowly from I/O errors process by process. I cannot issue commands from shell, even reboot. I have to physically reset the machine.

Is there a way to change its behaviour to auto remount as rw after reconnecting the USB and just keep running as usual?

I think the fstab is the file that i should modify, but cannot find a way how to do it properly. Please correct me if I'm wrong. My current fstab:
Code:
# 
# /etc/fstab: static file system information
#
# <file system>	<dir> <type> <options> <dump> <pass>
# /dev/sdb2
UUID=145b3c51-6531-48f3-a79b-fb1ae238c7ee / ext4 rw,relatime,data=ordered 0 1

# /dev/sdb1
UUID=AFC4-6899 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2

/swapfile none swap defaults 0 0

Get The Filename Where The Variable Is Set

Hello,
Host machine: Windows seven 64 bit
Guest machine on Virtual box: Oracle linux 6.5(64 bit)

If there are multiple files sourced, each containing many variables,and each in a location not known to the person using a user,
is there a way to know the file name where the variable is set?

Many thanks

Update Manager Doesn't Work With Linux Mint 17.1 Mate

this is what I get after running "inxi -r"
Repos: Active apt sources in file: /etc/apt/sources.list.d/clipgrab-team-ppa-trusty.list
deb http://ppa.launchpad.net/clipgrab-team/ppa/ubuntu trusty main
deb-src http://ppa.launchpad.net/clipgrab-team/ppa/ubuntu trusty main
Active apt sources in file: /etc/apt/sources.list.d/ferramroberto-lffl-trusty.list
deb http://ppa.launchpad.net/ferramroberto/lffl/ubuntu trusty main
deb-src http://ppa.launchpad.net/ferramroberto/lffl/ubuntu trusty main
Active apt sources in file: /etc/apt/sources.list.d/getdeb.list
deb http://archive.getdeb.net/ubuntu trusty-getdeb apps
Active apt sources in file: /etc/apt/sources.list.d/gnome3-team-gnome3-trusty.list
deb http://ppa.launchpad.net/gnome3-team/gnome3/ubuntu trusty main
deb-src http://ppa.launchpad.net/gnome3-team/gnome3/ubuntu trusty main
Active apt sources in file: /etc/apt/sources.list.d/kalakris-okular-trusty.list
deb http://ppa.launchpad.net/kalakris/okular/ubuntu trusty main
deb-src http://ppa.launchpad.net/kalakris/okular/ubuntu trusty main
Active apt sources in file: /etc/apt/sources.list.d/kilian-f_lux-trusty.list
deb http://ppa.launchpad.net/kilian/f.lux/ubuntu trusty main
deb-src http://ppa.launchpad.net/kilian/f.lux/ubuntu trusty main
Active apt sources in file: /etc/apt/sources.list.d/libreoffice-ppa-trusty.list
deb http://ppa.launchpad.net/libreoffice/ppa/ubuntu trusty main
deb-src http://ppa.launchpad.net/libreoffice/ppa/ubuntu trusty main
Active apt sources in file: /etc/apt/sources.list.d/official-package-repositories.list
deb http://packages.linuxmint.com rebecca main upstream import
deb http://extra.linuxmint.com rebecca main
deb http://archive.ubuntu.com/ubuntu trusty main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu trusty-updates main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu/ trusty-security main restricted universe multiverse
deb http://archive.canonical.com/ubuntu/ trusty partner
Active apt sources in file: /etc/apt/sources.list.d/ricotz-testing-trusty.list
deb http://ppa.launchpad.net/ricotz/testing/ubuntu trusty main
deb-src http://ppa.launchpad.net/ricotz/testing/ubuntu trusty main

Thanks in advance, ScottG

How To Convert Iso File To Burn To USB (don't Even Know How To Mount)

I'm a total total noob who is trying to download Linux Mint on a Mac OS X using a USB drive. I know there is some way to go into terminal and convert the iso file but I don't know how.

Here's the things I have tried so far: 1. sudo dd bs=4M if=[linuxmint-17.1-cinnamon-64bit.iso] of=/dev/disk2s1 (result: dd: bs: illegal numeric value)

~/path/to/Users/[my name]/linuxmint-17.1-cinnamon-64bit.img ~/path/to/Users/[my name]/linuxmint-17.1-cinnamon-64bit.iso -bash: /Users/[my name]/path/to/Users/[my name]/linuxmint-17.1-cinnamon-64bit.img (result: No such file or directory)
Maybe for #1 the "/dev/disk2s1" part is wrong? How do I find the number for the USB that goes after "dev/sd"? (I can only find "dev/disk2s1").

I have also tried to just mount/unmount the USB and drag the iso file into source/destination, to no avail.

Thanks so much!