How To Copy File From Remote Host To Local Host Then Delete From Remote Host

I have an expect script to SSH to a remote host and obtain some user inputs and information about the server/network configuration. The responses are saved in a text file that I then need to copy to my local host so that I can read the lines into variables for use in the parent shell script.

Is there a way to do this without needing to enter the username and password for the local host to use function scp? I have tried the following in my expect script to no avail:
Code:
spawn scp $usr@$host:$flnm .
expect {
	-re "(.*)assword:" { 
		send -s "$pswd\r"
	}
}

I have also tried to directly scp the file and enter the username and password to try to debug the issue, and that doesn't work either:
Code:
spawn scp file.txt user@host:file.txt
expect {
	-re "(.*)assword:" {
		send -s "password\r"
	}
	"you sure you want to continue connecting" {
		send -s "yes\r"
		exp_continue
	}
}

In both scenarios I have used exp_internal 1, and there are no errors. But I do not end up with the file on my local host.

Following the copy, I would like to delete the file from the remote host. Any suggestions on how to accomplish this?


Similar Content



How To Return From Shell 'read' Command Passed In Expect Script?

I have a shell script that calls an expect script I wrote to ssh login to another host and get user input regarding that host's network configuration. I pass four arguments to the expect script: the remote host ip address, the username, the password, and the list of commands to run. My expect script is below:

#!/usr/bin/expect
# Usage: expectssh <host> <ssh user> <ssh password> <script>

set timeout 60
set prompt "(%|#|\\$) $"
set commands [lindex $argv 3];

spawn ssh [lindex $argv 1]@[lindex $argv 0]

expect {
"*assword:" {
send -- "[lindex $argv 2]\r"
expect -re "$prompt"
send -- "$commands\r"
}

"you sure you want to continue connecting" {
send -- "yes\r"
expect "*assword:"
send -- "[lindex $argv 2]\r"
expect -re "$prompt"
send -- "$commands\r"
}

timeout {
exit }

expect -re $prompt
send -- "exit\r"
}

The script runs well, except that if I send a command such as 'read' that requires user input, the script does not continue or exit after the user presses enter. It just hangs.

The commands I pass to the expect script and it's call are as follows:
SCRIPT='hostname > response.txt;netstat -rn;read net_card?"What is the network interface card number? " >> response.txt; read net_mask?"What is the subnet mask? " >> response.txt'

/usr/bin/expect ./expectssh.exp $hostip $usr $pswd "$SCRIPT"

Any suggestions on how I can pass a command to my expect script that requires user input without it hanging?

On a side note because I know it will come up - I am not allowed to do key-based automatic SSH login. I have to prompt for a username and password, which is done from my main shell script.

Thanks for any suggestions and help you can provide!

Regular Expression In Expect Script To Prevent Printing To Screen

Hello, I have an expect script where I ssh to a remote host to determine the network configuration and get from the user the network interface card that should be used. From their response, I determine the subnet mask and save the information to a text file that is later transmitted back to my local host. This is all so that I can set up virtual IP aliasing and verify that the physical IP address of the local and remote host are on the same subnet prior to continuing with the setup. I am running the script on Linux, with expect version 5.45.

The code itelf works just fine, but I'm having some issues with how it displays on the screen. As you'll see below in the example, the default system prompt displays, as does the user input command that I'm sending to the shell from the expect script.

Is there a regular expression or something that I can write to prevent the prompt and command that I'm sending from printing to the screen? I know that it should be suppressed if I have an expect command following the Code:
send -s "\nread n_card?'Enter the network interface card number for this server (i.e. eth0):   '\r

command, but everything I have tried for strings and regular expressions to expect causes the netstat -rn output to not show up all of a sudden. I'm new to expect, so I'm not really sure why this is happening.

I would really appreciate any help/suggestions. Thanks for your time!

Part of the Script Code:
Code:
expect {
   -re $prompt {   ;# Send individual commands and get user input
        set timeout -1
        
        # Get partner hostname and put in vipsetup.txt file
        send -s "hostname > vipsetup.txt\r"  
        expect -re $prompt
        
        # Display the network routing info for the user and prompt for 
        # network interface card number
        send -s "print \"The network routing table for the $ptner server is displayed below:\n\" ; netstat -rn \r"
        
        expect -re "\r(.*):\r"
        send -s "\nread n_card?'Enter the network interface card number for this server (i.e. eth0):   '\r"
        interact "\r" return    ;# Wait for user input from read command
        send -- "\r"
        send -s "echo \$n_card >> vipsetup.txt\r"  
        
        # Obtain subnet mask information for partner based on network 
        # interface card number being used
        send -s "msk=\$(cat /etc/sysconfig/network-scripts/ifcfg-\$n_card | grep NETMASK)\r"
        send -s "msk=\$(echo \${msk#NETMASK=})\r"
        send -s "echo \$msk >> vipsetup.txt\r"
    }
    timeout {
        send_user "Connection to host $hostip timed out."
        exit 6 
    }
    eof {
        send_user "Connection to host $hostip failed."
        exit
    }
}


Script Output:
Code:
The network routing table for the PRIMARY server is displayed below:
 
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
10.105.65.0     0.0.0.0         255.255.255.0   U         0 0          0 eth0
0.0.0.0         10.105.65.1     0.0.0.0         UG        0 0          0 eth0
 [root@remotehost root]$
[root@remotehost root]$ ber for this server (i.e. eth0):   '              < 
Enter the network interface card number for this server (i.e. eth0):   eth0

SSH Error

I am trying to login to my linux server. I was initially doing "ssh hostname". The login did not work, so I tried "ssh username@IP", which still prompted me with the yes/no prompt, but I received this error:

Code:
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@    WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!     @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY!
Someone could be eavesdropping on you right now (man-in-the-middle attack)!
It is also possible that a host key has just been changed.
The fingerprint for the RSA key sent by the remote host is
XX:XX...:XX.
Please contact your system administrator.
Add correct host key in /Users/user/.ssh/known_hosts to get rid of this message.
Offending RSA key in /Users/user/.ssh/known_hosts:5
RSA host key for 192.168.1.3 has changed and you have requested strict checking.
Host key verification failed.

Need Help To Get The Available Hosts Among Many Hosts

I have many hosts as following. But those hosts are dual operating system (Linux and Windows). I always run program background. If someone is using Linux, it is fine. But if someone is using windows or the host is offline. Then, I cannot use ssh. The way I do preiviously is first ssh one by one. And then find the hosts which are offline or windows. And write them down one by one. And then ssh to hosts except them. Let us assume the number of programs is less than the total available hosts. Can someone write a shell script to output the all available hosts to a file like "host_available"?
Here is the host file.
https://www.dropbox.com/s/vbz6w864y3...tlist.txt?dl=0
I am using ssh to connect the computers on campus. If the computer I am trying to connect is offline or using windows, the ssh will take long time, and finally it will failed. I write a shell script to generate the hostlist
Code:
#!/bin/bash
for i in `seq -w 1 28`
do
echo "c15-0330-$i.ad.mtu.edu"
# I would like to add a command here to see whether ssh c15-0330-$i.ad.mtu.edu it succeeds or not. And then output a #file which contains the all available host.
done
for i in `seq -w 1 20`
do
echo "c28-0112-$i.ad.mtu.edu"
done
for i in `seq -w 1 20`
do
echo "c28-112a-$i.ad.mtu.edu"
done

I do not how to set a certain time to see whether connection is successful or not (see the comment in the shell script).

Python Ftplib

hello all,

please help me with python ftplib. i was trying to copy files from my linux machine to a windows server using ftplib. everything was working good. but i'm only able to copy files from the same directory the script is. how do i copy files from a different directory? i always get "file not found error message". here's my code :

Code:
tester_name = str (socket.gethostname())
def upload(ftp, file):
    ext = os.path.splitext(file)[1]
    if ext in (".txt", ".htm", ".html"):
        ftp.storlines("STOR " + file, open(file))
    else:
        ftp.storbinary("STOR " + file, open(file, "rb"), 1024)



parse_source_path = ('/path/to/where/i/go/')
parse_source_file_list = os.listdir(parse_source_path)

ftp = ftplib.FTP("server_IP")
ftp.login("username", "pass")

folder_list = []

ftp.dir(folder_list.append)

if str(tester_name) not in str(folder_list) :
    ftp.mkd("%s"%tester_name)
    ftp.cwd("%s"%tester_name)
    for files in parse_source_file_list :
        print files
        upload(ftp, files)


else :
    print "later"

How To Set A Time Limit Of Ssh

I have a hostlist and there are several hosts. I want to use ssh to connect to them. I want to see whether the host is available or not by the time length of ssh takes. If it take long than 5s (which means it is not available). Then stop it, and ssh to next host. Once a host is available, then output the name of host. I previously use nmap, but the IT security told it is not allowed to install it on the desktop on campus.
Code:
host_list="/home/campus27/zwang10/Desktop/cluster/program/hostlist"
HOSTS=`cat $host_list`
for line in $HOSTS
do 
timeout -5s `ssh $line`
done

The above script is all I can do.

Python FTP Send Command

hello Experts!
need some help here with python FTP. so what i'm trying to do is, from a linux machine, ill be sending over a python script to a windows machine via python ftp. that works fine with no problem. now, i want to execute that python script i sent remotely. im having trouble with that. here's my code to just execute the script:

p.s : please dont suggest other options such as python paramiko due to many network security reasons

Code:
ftp = ftplib.FTP("windows machine name")
ftp.login("username", "password")
ftp.cwd("where\\python\\script\\is kept\\")

ftp.sendcmd("python myscript.py")

but looks like it doesn't recognize that command. how do i accomplish this please?

Cygwin Rsync Script Copying File Incorrectly

I am trying to write a simple test script that executes a single rsync call. Once I get the syntax right, the script will be expanded to incorporate several rsync instructions to save me time.

I'm using a Cygwin Terminal on Windows 7 to run Rsync.

The script is called "backup" and I call it from the cygwin terminal using "./backup". Have used chmod to make it executable.

When I execute the rsync instruction as a standalone instruction at terminal prompt, the file copies to the target folder perfectly.

However, when I try and drop the same instruction into a script, it copies the file over from it's original file name "mvi_1840.mov" to a file with the name "." -- literally a single period. I can rename the file to a .mov file and it works fine but naturally, I don't want to have to do this.

The one other thing I will mention is that the file is located in the /home/"username" directory in cygwin vs /bin. But I would not think that this would make a difference.

I have pasted the contents of the script file below:
Code:
#!/bin/bash
    rsync.exe -rltDvP --exclude "System Volume Information" --exclude
 "RECYCLER" --exclude=\$RECYCLE.BIN --delete "/cygdrive/c/users/<USERNAME>
/desktop/mvi_1840.mov" "/cygdrive/c/users/<USERNAME>/desktop/test/"

Any help would be greatly appreciated!

Thanks

How To Get The Running Program Information Of Remote Computers?

I am a R user. I want to know whether remote computers are running R or not.
PROBLEM: How to know whether R program is running, and redirect the host which is running R to a file? I want to check the COMMAND column contains R. What should I do?
Here is the picture of "top" when running R programs(parallel).

Hide Password Ftp With The Same User

Hi
I must connect to ftp to get some files occasionally. To do these I make a script.
The problem is that the user is generic and all of my work use these user in the local host, and the remote machine I must connect with my personal user so they can see my password in the script
There is some way to avoid these?
Thanks and sorry for my English