Simple Script Needed To Calculate How Many "15" Minutes Are In A Time Stamp

Hi All,

Im trying to create a script which checks the creation time of a file and if it is more than ten minutes, send out an alert.

For ex : Creation date of file is 10:30 AM
current time is 10:45 AM

Then send an alert/ message.

This is the script i wrote below :

Code:

#!/bin/ksh

filename="/apps/log/file.txt"

if [ -f "${filename}" ]
then
        createTime=`ls -lad "${filename}" | awk '{print $8}'`
        echo "$createTime"
        currentTime=`date '+%M'`
        echo "$currentTime"
        DIFF=$(( $currentTime - $createTime )) 
        echo "$DIFF"

else

        exit 1

fi

I am getting syntax error on the subraction when i try to run this script . I can understand that creation time and current time is in different format thats y this error throws, but i dont know how to rectify it .

I need to find out if the file creation time is more than ten minutes.

Please help me in achieving this output.

Hi All,

I have two scripts, the aim of these two scripts is, to check whether a particular script is running or not, if it wont runs, then throw a mail.

How i Achieved this output is, I wrote first script.

I created an infinite while loop which performs below steps

1. It creates a touch file
2. Triggers the script which needs to be monitored if its working or not.
3. Removes the touch file.

If the second step fails, then the remove file command will not happen and the script will stuck there itself.

I created an another script which checks the creation time of the touch file and if it is more than ten minutes, it means the second step in the first script is hanged, which also means that particular script is not working.

So if the creation time is more than 2 minutes the second script will throw a mail.

Below are the two scripts.

Code:

#!/bin/ksh



userid="chansd"

filename="/apps/log/check.txt"

while true ;do
touch $filename
pass=`/apps/eDMZ/call_st.ksh $userid`
sleep 20
rm $filename
done

Below script checks the file creation time and throws email if it is older than 2 minutes
Code:

#!/bin/ksh


filename="/apps/log/check.txt"

if [ -f "${filename}" ]
then
if test "`find $filename -mmin +2`"
then
echo "script is not working ! Please act on it" | mail -s "Script  is not working" Example@mail.com
fi


else

        exit 1

fi

What im going to do is

1. I am going to run the first script in background so it runs forever.
2. I am going to run the second script in cron forevry 5 mins to check the file creation time.

3. So if the first script hangs . I will kill the process using process id and after the issue resolves with the inner script, I will run the main script again.

I am new to Linux, Please let me know if this approach will work as expected.

hello all,

please help me with python ftplib. i was trying to copy files from my linux machine to a windows server using ftplib. everything was working good. but i'm only able to copy files from the same directory the script is. how do i copy files from a different directory? i always get "file not found error message". here's my code :

Code:

tester_name = str (socket.gethostname())
def upload(ftp, file):
    ext = os.path.splitext(file)[1]
    if ext in (".txt", ".htm", ".html"):
        ftp.storlines("STOR " + file, open(file))
    else:
        ftp.storbinary("STOR " + file, open(file, "rb"), 1024)



parse_source_path = ('/path/to/where/i/go/')
parse_source_file_list = os.listdir(parse_source_path)

ftp = ftplib.FTP("server_IP")
ftp.login("username", "pass")

folder_list = []

ftp.dir(folder_list.append)

if str(tester_name) not in str(folder_list) :
    ftp.mkd("%s"%tester_name)
    ftp.cwd("%s"%tester_name)
    for files in parse_source_file_list :
        print files
        upload(ftp, files)


else :
    print "later"

I am trying to write a simple test script that executes a single rsync call. Once I get the syntax right, the script will be expanded to incorporate several rsync instructions to save me time.

I'm using a Cygwin Terminal on Windows 7 to run Rsync.

The script is called "backup" and I call it from the cygwin terminal using "./backup". Have used chmod to make it executable.

When I execute the rsync instruction as a standalone instruction at terminal prompt, the file copies to the target folder perfectly.

However, when I try and drop the same instruction into a script, it copies the file over from it's original file name "mvi_1840.mov" to a file with the name "." -- literally a single period. I can rename the file to a .mov file and it works fine but naturally, I don't want to have to do this.

The one other thing I will mention is that the file is located in the /home/"username" directory in cygwin vs /bin. But I would not think that this would make a difference.

I have pasted the contents of the script file below:
Code:

#!/bin/bash
    rsync.exe -rltDvP --exclude "System Volume Information" --exclude
 "RECYCLER" --exclude=\$RECYCLE.BIN --delete "/cygdrive/c/users/<USERNAME>
/desktop/mvi_1840.mov" "/cygdrive/c/users/<USERNAME>/desktop/test/"

Any help would be greatly appreciated!

Thanks

I want to get the time when program starts and finishes. But it always show the same time. Here is my shell script. But it always show that `START TIME` is same as `END TIME`.
Code:

host_list=("c15-0330-01.ad.mtu.edu" "c15-0330-02.ad.mtu.edu" "c15-0330-03.ad.mtu.edu" "c15-0330-04.ad.mtu.edu")
program=("L_1" "L_4" "L_3" "L_4")
subject="The job is finished"
START=$(date +"r")
address="/home/campus27/zwang10/Desktop/AWRR/program/power/vmodel_1/nprot/K_10"
ssh -f "${host_list[0]}" "cd '$address' && nohup Rscript '${program[0]}.R' > '${program[0]}_sh.txt';echo 'The job\n $address\n${program[0]} is finished\nSTART TIME = $START\n' END TIME =`date +"%r"` | mutt zwang10@mtu.edu -s '${host_list[0]} - Job ${program[0]}.R finished' -a '$address/${program[0]}_sh.txt';"

hello,

i am trying to make a table from some files. i used this to record how much "RD_" field i have in my file. Quote:
grep -o 'RD_' $f|grep -c 'RD_'
forexample i got 5 "RD_" fields now i want to print 5 number of fields from another file starting from 2nd field. i did it mannully like Quote:
awk 'NR==1{print"{"$2","$3","$4","$5","$6","0.0000",""0.0000""}"","}' $file
i want to make it work together and a bit auto matic like PHP Code:
awk 'NR==1{print"{"$2"to "$5"," apend zeros to make it total 7 fields"}"","}' $file 


your coments would be apreciated
thanks alot

I have simple c code and I want to make .bin file to run on friendly arm board. In redhat I install cross compile gcc and Use "gcc -o hello hello.c" this command to make object file. when I run this file in friendly arm it give "line 1: syntax error: unexpected "(" "

Thanks
--
Abdul Wahab

i need a bash script to switch to zero second on ac the waiting time for turning off the monitor (highlighten in red). same as for on battery (highlighten in purple)

Code:

<?xml version="1.0" encoding="UTF-8"?>

<channel name="xfce4-power-manager" version="1.0">
  <property name="xfce4-power-manager" type="empty">
    <property name="power-button-action" type="empty"/>
    <property name="show-tray-icon" type="empty"/>
    <property name="logind-handle-lid-switch" type="bool" value="true"/> 
    <property name="dpms-on-ac-sleep" type="uint" value="1"/>
    <property name="dpms-on-ac-off" type="uint" value="2"/> 
    <property name="brightness-on-battery" type="uint" value="9"/> 
    <property name="dpms-on-battery-sleep" type="uint" value="1"/>
    <property name="dpms-on-battery-off" type="uint" value="2"/> 
    <property name="lock-screen-suspend-hibernate" type="bool" value="false"/>
    <property name="dpms-enabled" type="bool" value="true"/>
  </property>
</channel>

I use following shell script to send email. But the subject of email always shows "This" instead of "This is L_1.R is finished". You may refer http://www.linuxquestions.org/questions/linux-newbie-8/how-to-define-variable-in-%60ssh%60-4175540566/
Code:

host_list=("c15-0330-01.ad.mtu.edu" "c15-0330-02.ad.mtu.edu" "c15-0330-03.ad.mtu.edu" "c15-0330-04.ad.mtu.edu")
program=("L_1" "L_2" "L_3" "L_4")
subject="The job is finished"
ssh -f c15-0330-01.ad.mtu.edu 'echo' "the job ${program[0]} is finished" '|' 'mutt "zwang10@mtu.edu" -s' "This is "${program[0]}".R is finished";

Hi all,

I'm trying to identify files that do not have matches for certain strings. FYI, these are files of DNA sequences and I'm trying to find those that are NOT sampled for any species by my group of interest (e.g., genes that are specific to that group of organisms).

I tried this code but it's actually yielding a list of files that DO match for my regexp.
Code:

for FILENAME in *.fas
do
grep -q -L ">PBAH" $FILENAME && grep -q -L ">SKOW" $FILENAME && grep -q -L ">CGRA" $FILENAME && echo $FILENAME
done

Basically I want to somehow go through and file files that do not contain ">PBAH" ">SKOW" or ">CGRA". Any assistance would be greatly appreciated!

Best,
Kevin